Jump to content

Recommended Posts

Posted

Keith, the green is spot on. I really like the looks of the hull. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted (edited)

I think I would have had a cardiac arrest while the first paint went on ...

 

Loosk like my favourite green, British Racing Green or RAL 6007 Bottle Green. Difficult to get these days, but I had it mixed up in acrylics for the paint-jobs on my machines.

 

And I think this is enough paint to give a balance between the realistic impression of the real thing, while preserving the beautiful planking and varnishing job.

 

Edited by wefalck

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Posted

Agree with Eberhard. Great job on the masking Keith, those lines look good. So, has the heart rate stabilised?

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Posted

 

Glen, Rick, Keith, MCB, Ian, Eberhard, Pat - thank you all for your continuing support and thanks to everyone for all the likes and visits.

 

Eberhard, I don't get very stressed about paint it's drilling holes in the hull that traumatises me.

 

I have been making a bit of progress with the ships bow decoration.

A198B65B-A889-44DC-8CB5-EAC41A371B07.thumb.jpeg.55acca6f7c44d5bc632db2c3d3d0dbcb.jpeg.e53815bff26402520e425b61c596cc94.jpeg

I had previously made the oval feature.

DSC03168.thumb.JPG.dfddc0e0808a3ea3ce24bdce2edb742b.JPG

I bought some .04" bearings to create the fringe. They were fixed in position with clear varnish.

DSC03178.thumb.JPG.307d1b1c1c01b3fa69e96c28723bc913.JPG

I then applied 3 coats of gold paint.

DSC03194.thumb.JPG.5b69b151cf9971d54d943c110aa5e7f8.JPG

I masked the carvings on the bow and painted them gold.

DSC03204.thumb.JPG.64081650e72817fc360122cf105e2d87.JPG

I also did a bit of repair work to the paint. In one position the masking tape had covered the very edge of the reinforcing plate. I applied a further piece of tape and painted the edge by hand with a very fine brush.

DSC03206.thumb.JPG.3a91dc3acf28cd969bc8781303f73283.JPG

DSC03207.thumb.JPG.f9cf822ff7083e44f822b35b5e3315e8.JPG

Then it was time to cut the hull from its building board. I used my pull saw to cut each frame in turn.

DSC03208.thumb.JPG.4c8377b4c770dbe59c122c7f77b3a518.JPGDSC03209.thumb.JPG.74d02cfecbb9e79eb81510e8a2988147.JPG

It took a while but eventually the hull was free and in its building cradle.

DSC03210.thumb.JPG.a8ddab8dee5a0a88d15d712203436911.JPG

I now need to cut all the up-stands off.

 

 

 

 

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Posted
47 minutes ago, druxey said:

I presume that you counted the number of ball-bearings to match the original, didn't you? ;)

 And they're so evenly spaced. Terrific bit of work, Keith. The freed hull looks neat.

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted

Nice work on replicating this 'granulation' or 'filligree' as jewelers would call it. 

 

There is also a little-known tool called a millgrain-wheel that can be used to create decorative beaded wire. It's kind of a concave punch-wheel and sold for different bead-sizes and spacings.

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Posted
2 hours ago, wefalck said:

There is also a little-known tool called a millgrain-wheel that can be used to create decorative beaded wire.

Eberhard - I wasn't aware of that but I did find an interesting youtube video. Thanks for the suggestion.

 

13 hours ago, Keith Black said:

And they're so evenly spaced.

Just pushed one against the other Keith.🙂

 

12 hours ago, Tony Hunt said:

I hope you had a glass of champagne handy when you finished?

No - just a cup of tea Tony.

 

Thank you Andy, Phil, Craig, Druxey.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Posted

Well here's raising a cup of very strong tea (only slightly laced with ...) to your success with the gingerbread Keith; that is some very nice work.  We are becoming accustomed to your very fine work but you continue to impress us.


cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Posted

Thank you Pat, Rick & Gary.

 

Another week has passed but unfortunately not all weeks go to plan - more of that later.

 

You will recall in my last post the hull came off the mounting board.

DSC03211.thumb.JPG.3403c40aef23608b8c5e651d591a50ca.JPG

The next task was to remove all the up-stands to deck level. Those of you with long memories will recall that when I cut out the frames I scrolled along the deck line leaving only a small un cut attachment section. You can just about see the cut at arrow "A" in the next photo.

Removing the up-stand therefore only involved two vertical saw cuts at "B" and a horizontal saw cut at "C".

DSC03227.thumb.JPG.8dda95b740f7a18bede74a797c34894a.JPG

I tried doing the horizontal cut by plunging in a small Dremel circular saw. The saw did a lot of snatching so I tried a diamond cutting disc which proved to be a lot more successful.

DSC03253.thumb.JPG.0690f782880d3a6b9327be408b8bfc40.JPG

DSC03228.thumb.JPG.2a1716885619e6066f6a7c19aa5a28f3.JPG

I left a small section of building board at the bow to anchor the decoration with an elastic band while gluing.

DSC03215.thumb.JPG.2aef8d2b269644dbcb092a5df16053f5.JPG

DSC03217.thumb.JPG.f9e11d89e4d2ff8d34422e5f2d5296c5.JPGDSC03218.thumb.JPG.a61ef87585e663ed2da237a72a413636.JPG

I then went on to finish the wall cladding inside the engine / boiler room. This small section had been inaccessible from the outside while planking. The cladding is necessasary to produce a smooth internal finish as per the original. The cladding was glued in place using PVA wood glue. The cladding was held in place with pieces of up-stand and clamps while drying.

DSC03229.thumb.JPG.e96bd10642f5ea751b519d5b826cc5fd.JPG

However this turned out to be a stupid plan because the PVA expanded the hull planks and damaged the hull finish. I am very stupid!

 

Fortunately only light sanding was required to get the hull smooth again.

DSC03233.thumb.JPG.93a39c199ef68f4c2eb4ac171b17afcf.JPG

Now I get some more varnishing practice.

 

For the cladding on the other side I have a different plan.

DSC03232.thumb.JPG.5beff63723bb95f32edd82658839ae9a.JPG

The workshop has been a bit warmer of late so I am hoping for 2 coats of varnish per day. Oh what fun!

 

 

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Posted
34 minutes ago, yvesvidal said:

There is always a silver lining in every problem we face.

 

32 minutes ago, druxey said:

Sorry about the water content in PVA doing that. How frustrating!

Yves / Druxey - The most annoying bit is that it was predictable. I don't suppose I will make the same mistake again.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...