KeithAug Posted June 3 #271 Posted June 3 Valeriy. They look smart. Presumably you aren't planning to paint them? mtaylor, Mirabell61, davyboy and 4 others 7 Quote Keith Current Build:- Cangarda (Steam Yacht) - Scale 1:24 Previous Builds:- Schooner Germania (Nova) - Scale 1:36 https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/ Schooner Altair by KeithAug - Scale 1:32 - 1931 http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702 J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration. http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029 Other Topics Nautical Adventures http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846
Valeriy V Posted June 3 Author #272 Posted June 3 34 minutes ago, KeithAug said: Valeriy. They look smart. Presumably you aren't planning to paint them? Keith, almost all the fine detail on this model will not be covered with paint. Nickel plating or polished brass coated with varnish will be used. Keith Black, cotrecerf, mtaylor and 7 others 10 Quote
yvesvidal Posted June 3 #273 Posted June 3 14 minutes ago, Valeriy V said: Keith, almost all the fine detail on this model will not be covered with paint. Nickel plating or polished brass coated with varnish will be used. That is unusual, but I am sure the result will be "precious". Yves Canute, Valeriy V, druxey and 4 others 7 Quote
wefalck Posted June 3 #274 Posted June 3 I suppose that's how 'builder's models' in the old days often were treated. druxey, Bob Cleek, Canute and 7 others 10 Quote wefalck panta rhei - Everything is in flux
Valeriy V Posted June 5 Author #275 Posted June 5 Steam steering drive. GrandpaPhil, Siggi52, cotrecerf and 17 others 16 4 Quote
Mirabell61 Posted June 5 #276 Posted June 5 Rudder chain device is great Valeriy, obviously it was not hyraulic operated yet Nils mtaylor, cotrecerf, Keith Black and 3 others 6 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
cotrecerf Posted June 5 #277 Posted June 5 On 6/3/2024 at 6:38 PM, Valeriy V said: Саша , Gary , Roel, Ricr and that's all, thank you for your kind words and attention to my topic! The photo shows a small number of nickel-plated parts. Hey Valeriy, super good look of the items. Especially the rudder being a quite massive part, looks very convincing. Could you achieve these results with your "hobby equipent" or did you use industrial facilities? If achievable by hobby equipment, would you be willing to share your production secrets of nickel plating with us and describe the process? I'm always keen on learning from masters. best greetings Joachim Mirabell61, Ras Ambrioso, druxey and 3 others 6 Quote
Valeriy V Posted June 5 Author #278 Posted June 5 2 hours ago, cotrecerf said: Hey Valeriy, super good look of the items. Especially the rudder being a quite massive part, looks very convincing. Could you achieve these results with your "hobby equipent" or did you use industrial facilities? If achievable by hobby equipment, would you be willing to share your production secrets of nickel plating with us and describe the process? I'm always keen on learning from masters. best greetings Joachim Hello Joachim! Regarding nickel plating, I wrote everything I could in the topic on Varyag. Look there carefully. I can say briefly about this process that I learned it from videos from the Internet in Russian. I think that the same videos are available in English and German. In a search engine, write for example: “nickel plating or copper plating at home.” This is all quite easy to study and understand on your own. Unfortunately, my weak English will not allow me to tell you the same way as in these videos. Tony Hunt, cotrecerf, Roger Pellett and 8 others 9 2 Quote
Valeriy V Posted June 5 Author #279 Posted June 5 7 hours ago, Mirabell61 said: Rudder chain device is great Valeriy, obviously it was not hyraulic operated yet Nils Thanks Nils! Yes, this ship was not distinguished by advanced equipment. mtaylor, FriedClams, Canute and 4 others 7 Quote
Valeriy V Posted June 5 Author #280 Posted June 5 On 6/3/2024 at 8:54 PM, wefalck said: I suppose that's how 'builder's models' in the old days often were treated. Yes that's right. This model will be built like the Varyag in the style of "factory demonstration models". Keith Black, Bob Cleek, FriedClams and 4 others 7 Quote
cotrecerf Posted June 5 #281 Posted June 5 Hello Valeriy, I recall having looked closely to your electro-forming excursus in your Varyag build log. Apparently in missed the other topic. Thank you very much for your lead. Joachim Keith Black, Canute, mtaylor and 5 others 8 Quote
Valeriy V Posted June 15 Author #282 Posted June 15 Some more details have been added. Knocklouder, Roger Pellett, KeithAug and 23 others 21 5 Quote
Mirabell61 Posted June 15 #283 Posted June 15 Hi Valeriy, wonderful work. Are those the boat-winches? Nils FriedClams, Keith Black and Canute 3 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Valeriy V Posted June 15 Author #284 Posted June 15 41 minutes ago, Mirabell61 said: Hi Valeriy, wonderful work. Are those the boat-winches? Nils Thank you, Nils! This is a hawser reel. Keith Black, FriedClams, Mirabell61 and 5 others 7 1 Quote
Ras Ambrioso Posted June 20 #285 Posted June 20 Just found your new build and will religiously follow. Hail to the Master. Mirabell61, mtaylor, Canute and 3 others 5 1 Quote Ras Current builds: Stern Paddle Wheeler ZULU-1916-1/48 scale Previous builds: Freccia Celeste-1927 350cc racing motorcycle-1:9 scale-Protar kit Boeing B17F- 1/72 scale- Hasegawa kit HMS Mimi-scale 1/24-Fast Motor Launch Amapá 1907-1/64 scale-Brazilian Customs Cruiser Scottish Motor Fifie. 1/32 scale. Amati kit Patricia. Steam powered R/C launch. 1/12 scale. Krick Kit African Queen. Steam powered R/C launch. 1/24 scale. Billings ki Emma C. Berry. Sailing fishing smack. 1/32 scale. Model Shipways kit.
Valeriy V Posted June 27 Author #286 Posted June 27 I welcome everyone! The number of parts on the model has been increased. Gangways. steamschooner, FriedClams, Ian_Grant and 14 others 16 1 Quote
Valeriy V Posted June 27 Author #287 Posted June 27 Skylights. KeithAug, ccoyle, knightyo and 24 others 23 4 Quote
Mirabell61 Posted June 27 #288 Posted June 27 Valeriy, those skylights are wonderful. How and with what methode did jou do the glassing ( looks great ) ! Nils Keith Black, Tony Hunt, Canute and 3 others 6 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
FriedClams Posted June 27 #289 Posted June 27 Such beautiful work as we have all come to expect, Valeriy. The precision of those ladder/steps is remarkable. Excellent! Gary Mirabell61, Keith Black, Tony Hunt and 3 others 6 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox
Valeriy V Posted June 27 Author #290 Posted June 27 37 minutes ago, Mirabell61 said: Valeriy, those skylights are wonderful. How and with what methode did jou do the glassing ( looks great ) ! Nils Thank you, Nils! I make glass for portholes using the old proven method. These are plexiglass cylinders that are polished at the ends until completely transparent. Rudolf, davyboy, wefalck and 11 others 14 Quote
Valeriy V Posted June 27 Author #291 Posted June 27 21 minutes ago, FriedClams said: Such beautiful work as we have all come to expect, Valeriy. The precision of those ladder/steps is remarkable. Excellent! Gary Thanks Gary! The ladders are soldered on a simple device that is easy to make precise on a milling machine. Rudolf, Canute, FriedClams and 12 others 14 1 Quote
Mirabell61 Posted June 27 #292 Posted June 27 Thank you Valeriy, glassing with face-polished plexiglass cylinders, very smart ! Nils Keith Black, Valeriy V, FriedClams and 1 other 4 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Valeriy V Posted June 28 Author #293 Posted June 28 Some parts are put together. wefalck, Keith Black, Rudolf and 11 others 11 3 Quote
yvesvidal Posted June 28 #294 Posted June 28 23 hours ago, Valeriy V said: It is kind of funny to see these two ladders erected, with no upper support. Super Glue ? Yves Canute, Valeriy V, FriedClams and 2 others 5 Quote
yvesvidal Posted June 28 #295 Posted June 28 23 hours ago, Valeriy V said: Ah, another one of Valeriy's giant matches.... 🙂 Yves FriedClams, Valeriy V, KeithAug and 2 others 5 Quote
Valeriy V Posted June 28 Author #296 Posted June 28 4 hours ago, yvesvidal said: It is kind of funny to see these two ladders erected, with no upper support. Super Glue ? Yves No, Yves. This is one pintle. FriedClams, yvesvidal, Keith Black and 1 other 4 Quote
Keith Black Posted June 28 #297 Posted June 28 (edited) 11 hours ago, yvesvidal said: It is kind of funny to see these two ladders erected, with no upper support Borrowing a remark from @mtaylor, "stairways to heaven" Edited June 29 by Keith Black Canute, FriedClams, mtaylor and 2 others 1 4 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
Dr PR Posted June 29 #298 Posted June 29 (edited) The upper part of the superstructure must have been painted with invisible camouflage paint! Edited June 29 by Dr PR FriedClams, Tony Hunt, Keith Black and 3 others 1 5 Quote Phil Current build: USS Cape MSI-2 Current build: Albatros topsail schooner Previous build: USS Oklahoma City CLG-5 CAD model
Tony Hunt Posted June 29 #299 Posted June 29 Those ventilators are really wonderful. In fact, the whole model is really wonderful! FriedClams, mtaylor, Keith Black and 2 others 5 Quote
Valeriy V Posted June 29 Author #300 Posted June 29 45 minutes ago, Tony Hunt said: Those ventilators are really wonderful. In fact, the whole model is really wonderful! Thank you, Tony! I try as best I can. There are few parts on the spar deck yet, there will be about twice as many of them. GrandpaPhil, FriedClams, KORTES and 10 others 9 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.