Royal Louis 1780 by Ulises Victoria - FINISHED - Mamoli - Scale 1/90 - French 126-gun ship

[Ulises Victoria]

Hello all.

Couldn't wait and I'm posting these photos with the sole purpose of starting my Royal Louis build log.

 

I'm under the impression this will be a real challenge.

 

Box and contents shown. I know before hand I won't be using some of the stuff in this kit. Like those metal boats: Plan to purchase wooden kits for those parts. Blocks: I'm planning to purchase blocks from an external source. Rigging thread: I will make my own. Too many metal parts. Still don't know which I will use or won't. Will decide in due time.

 

Actual build photos will come later.

 

All you see in the photos is all the room I have to build. That is a blanket closet. 

I dream of a really big and spacious shop. 

[marktiedens]

I built this kit many years ago - I`m sure yours will turn out much better than mine.I still have it but I`m not too proud of it.

 

/Mark

[Ulises Victoria]

You will never ever see my workspace this neat and clean again. (I must confess it wasn't me, but my cleaning lady.) 

Now I feel more motivated to start building.

And yes, this is all the room I have to build my ships. 

Edited August 15, 2014 by Ulises Victoria

[WackoWolf]

That does look to be one big ship. Will be waiting for the pictures.

[Bindy]

Hi again,

 

I am so happy to be here from the very beginning to watch you build another magnificent ship!   If the box for your Royal Louis was any bigger then you would need a larger desk just to hold it haha.

 

But on the bright side, at least you don't have too much room to lose things 

[Ulises Victoria]

Hi again,

 

I am so happy to be here from the very beginning to watch you build another magnificent ship! If the box for your Royal Louis was any bigger then you would need a larger desk just to hold it haha.

 

But on the bright side, at least you don't have too much room to lose things

He he thanks. Problem is a larger desk won't fit there. 

Edited April 14, 2014 by Ulises Victoria

[Sjors]

That's a nice one Ulises !

 

Enjoy the build and we are watching over your shoulder !

 

[Ulises Victoria]

Oh my God! Look at the size of this skeleton. It fills my table! And without bowsprit!!

Where am I going to do the actual work??? 

Edited April 13, 2014 by Ulises Victoria

[Karleop]

I think you must change your workplace, for instance dinning or sleeping room for coset and viceversa, haha!!        

 

Anyway  good luck with your Royal  

 

Saludos, Karl

[JanV]

start is there Ulises, I think you have to move to an other room in your house.

[Ulises Victoria]

start is there Ulises, I think you have to move to an other room in your house.

 

If there was one, I would've already.

[Ulises Victoria]

Running a strip of wood over the upper surface of the frames, revealed that they were not properly aligned. Marked with arrows the direction in which some frames had to be adjusted. When they needed to be rised, a small bit of wood was glued in the slot.

[dgbot]

You have picked a nice looking model. I look forward to your build

David B

[Guest Tim I.]

It looks like a challenging build! I look forward to following your progress.

 

- Tim

[CaptainSteve]

Oh my God! Look at the size of this skeleton. It fills my table! And without bowsprit!!

Where am I going to do the actual work??? 

 

Hmmm ... maybe you could attach your keel-holder to a hat. Then balance the model on your head whilst working on parts at your desk.

Just don't turn around too quickly in that small space !!!

 

But, seriously, I know how you feel, UV. My own work-space isn't much bigger than yours ... at least not for another eight weeks. Then I'll have an entire bedroom dedicated to ship-building.

Edited April 14, 2014 by CaptainSteve

[demonborger]

I plank mine using my thighs as a clamp and as a table

 

The surface area of the hull below the wales is absolutely huge, it gives a sense of the size of a 120+ gun first rate much better than the Occre Santisima Trinidad.

[TheDutchShipBuilder]

Nice kit. I also have experience with manufactures who puts lots of metal parts in the kit instead of wood

I wish you good luck with your built, I will follow it!

 

(By the way, you have more space to work than me )

[demonborger]

There is a few metal parts but it's not that bad imo.

 

Some of the rigging items could've been wood perhaps.

 

 

I don;t mind the metal head rails, the galleries or the fences with the belltowers - they're all quite ok. I could see some making their own head rails if they wanted of course. The metal ships wheel is fair enough imo. My kit had wooden fibre boats rather than metal ones so can't comment there. 

 

One thing to think about is the "box wood" quantities supplied and if it is enough...mine was a few short which had to be supplemented by material form another mamoli kit.

[Azzoun]

I'm excited to watch this build, and take notes~!

[Padeen]

Hi Ulises,

Is it so much bigger than the Vasa?

 

I'll be happy to follow your build, le Royal Louis is one ship from my favourite period of history.

 

Enjoy your build!

[Ulises Victoria]

Hi Ulises,

Is it so much bigger than the Vasa?

 

I'll be happy to follow your build, le Royal Louis is one ship from my favourite period of history.

 

Enjoy your build!

Hello Padeen.

Vasa: 940mm at 1/75 scale ; Royal Louis: 1080mm at 1/90 but a lot wider at the waist.

 

Thanks all for visiting and commenting. 

[marktiedens]

My Royal Louis also was short on boxwood planks - didn`t even have enough to do one side.

 

/Mark

[jnarro]

Another Big One for you Ulises, Go for it!!!!!

 

It looks Awsome!!!

[riverboat]

This looks like a real nice  build Ulises,it's a beautiful ship . I'll be look'n in from time to time  to ck on your progress. Have Fun!!!

Frank

[Ulises Victoria]

Update April 15.

Glued all the frames, the 2 square bars that go all the length of them and a small piece that seems to be some sort of a holding place for the main mast.

 

Making sure frame one is 90o to the keel

 

Double check

 

A few more frames

 

 

Making sure at every step along the way, that everything is as it should.... and still mistakes happen

 

Completed all the frames. Views from different angles.

 

 

 

 

 

So far, so good!

 

Thanks for watching.

Edited April 15, 2014 by Ulises Victoria

[Azzoun]

wow.. your pictures really convey the size of this model, i'm overwhelmed just looking at them. 

[Ulises Victoria]

Thank you Azzoun.It is indeed a large model, and to me is so very beautiful. I am actually surprised there are so few build logs of this ship here in MSW as well as some other ship modeling forums I visit.

It's not a cheap kit, so that may be one of the reasons.

If I'm building this right now, is because I got it at a super discount at Model Expo back in 2010. I couldn't afford it at its regular price.

[Jack Panzeca]

Hi Ulises,

This is a great looking project! You are off to a wonderful fast start. A beautiful ship and a really large model. Good luck on your new build.

[WBlakeny]

Ulises, that's a really big ship!  You're off with a great start.  I'll be following this one, she's gonna be a beautiful ship.

[mtaylor]

Hi Ulises,

 

You're doing a great job on her.   I think you hit it dead center on why there's not more builds of her... cost and let's add size.