Jump to content
MSW Spring Donation Drive

UpstateNY

Members
 View Profile  See their activity

  • Posts

    466

  • Joined

  • Last visited

 Content Type 

Everything posted by UpstateNY

  1. UpstateNY
    Hi All, Again, thanks for all the comments and likes everyone.. It has been slow going as I learn, but I've made a little progress on the rigging. All the double blocks for the shrouds have been seized to the eyebolts ready for attaching to the chainplates. Hard to tell from the pictures, but the top of the mainmast shrouds were then served where they wrap over one of the metal crossbars at the top of the mast. Finally, before tightening the shrouds, pairs of single blocks were attached to the mast using the other crossbar. These pairs of blocks will be used later when the sails are added. Now on to complete the fore and mizzen mast shrouds...hopefully this will go a bit faster! Cheers, Nigel.
  2. UpstateNY
    Hi Chuck, Thanks for the great step by step overview. Really useful tips that can be applied in many parts of a build. Very much enjoying watching the Cheerful come together. Cheers, Nigel.
  3. UpstateNY
    Hi Augie, Take care of yourself and get better soon... Cheers, Nigel.
  4. UpstateNY
    Hi Jesse, Been enjoying your build...really challenging with such a fragile glass bulb. On the sea...just a thought but would a thin layer of Scuply perhaps work so it isn't too heavy? Comes in many colors and could be painted as well. Could be textured to make some waves and lightly rolled to get it in before opening it out. Some white paint once it is in may allow some white caps as well. Just a thought.....good luck! Cheers, Nigel.
  5. UpstateNY
    Hi Hamilton, Very much enjoyed catching up on your build to date....great work! Thanks for highlighting how you've checked and then shimmed all the parts to match the plans. I am sure this will pay big dividends as you complete the hull. Pulling up a chair for the rest of the voyage if you don't mind. Cheers, Nigel.
  6. UpstateNY
    Thanks for stopping by and for the nice comments and likes everyone! Hi Lionfish, I'd need to add a few ice sailing mods to sail my Dragon on Lake Champlain pretty soon! Champ is safe for another season! Cheers, Nigel.
  7. UpstateNY
    Hi All, Thanks again for all the kind comments and of course for the likes. Well, I finally managed to complete the cannons. Tackles used Syren 2mm blocks, 4mm hooks and 0.008in rope; breaching lines were 0.025in rope, combined some 4mm hooks and rings. An anchor bend was used to attach the breaching ropes to the rings and the tackles were tied off to Syren boxwood cleats. Overall, I am pretty happy with how the cannons turned out and I'm glad I managed to use the 2mm blocks. You can see how large a 4mm block looks in the first image. I also attached and rigged the anchor I made a few posts back. An anchor bend was again used to tie the 0.025in rope to the ring and I made up a walnut support so I could tie down the anchor. I need to do some touch up here and there on the metal work which has lost some finish and then it is time to start the standing rigging! Thanks for reading and images below. Cheers, Nigel.
  8. UpstateNY
    Hi Max, Wonderful work...love the way the paint and wood colors are working together as well as the progress on the masts. Really enjoying your photography work as well! Cheers, Nigel.
  9. UpstateNY
    Hi Dave, Like George, I am not seeing anything other than your posts and images. Great build...really fun to watch this come together. Cheers, Nigel.
  10. UpstateNY
    Hi Popeye, Glad to see you back building again. Sorry about the redo's, but she is looking great! Cheers, Nigel.
  11. UpstateNY
    Hi Dimitris, Great to see the deck furniture starting to be added. I always really enjoying watching this part of every build...seems to make the model come to life. Congrats on your Royal Caroline as well! Cheers, Nigel.
  12. UpstateNY
    Hi Nenad, The 'Like" of course is for some support as I am very sorry to hear your mother in law is unwell once again...will hope and pray the antibiotics help. Love your CS cabin build work, looking really good. As for the firewood...yep it is that time of year here as well..just glad my wood is also split and stacked given fall is now in full swing! Cheers, Nigel.
  13. UpstateNY
    Nice to see you building again Captain! Looking forward to watching your modifications take shape. Cheers, Nigel.
  14. UpstateNY
    Hi Nils, That is simply staggeringly good work. Seems almost a shame to paint over all this wonderful plating, but l am certainly looking forward to that as well! Cheers, Nigel.
  15. UpstateNY
    I think your doc is well on his way to getting two wonderful models! He is going to love both! Cheers, Nigel.
  16. UpstateNY
    Thank you so much for the kind comments and the likes guys! Really encouraging. Cannons are in progress, but jeez these 2mm blocks hard to hold on to! First line took me an hour, but progress is slowly being made. Cheers, Nigel.
  17. UpstateNY
    Wonderful news all went well Patrick. Take care of yourself and here's to a fast recovery! Cheers, Nigel.
  18. UpstateNY
    Hi All, Thanks for the more kind comments and of course for the likes. Support is really appreciated. So, a little more progress as the tiller rigging has been redone using the 3mm Syren blocks. Glad I did this as I think the 3mm blocks work better than the 4 mm blocks I used before. I also glued down the gallery stairs and support posts. Stair rigging was completed in the same way as the tiller except the lines were tied off to one of Chuck's cleats. Overall I am pretty happy with these first tries given I am starting on the rigging learning curve. Next up are the cannons! Thanks for reading! Cheers, Nigel.
  19. UpstateNY
    Hi Duff, I've been hoping to see a build log for this kit after I saw the kit announcement some time back. Looks really great so I'll follow along as well if you don't mind! Cheers, Nigel.
  20. UpstateNY
    Best wishes for today Patrick. Cheers, Nigel.
  21. UpstateNY
    Hi Dave, Enjoying your build greatly, including the fun color choices! Lovely work! Congrats on getting the IV out...I can't even imagine how much better you feel with that gone! Good luck on the golf course...enjoy the 19th especially as a small celebration seems in order now the IV is gone! Cheers, Nigel.
  22. UpstateNY
    Hi Nils, Those are just some wonderful photos! I really like the way the plate and rivet patterns work together. Great stuff and thank you for sharing your plating technique. Cheers, Nigel.
  23. UpstateNY
    Hi Patrick, My best wishes for a fast recovery as well...take care and I hope will soon be back in the shipyard! Really enjoying your Magellan build come together....lovely work! Cheers, Nigel.
  24. UpstateNY
    Hi All, From my first attempt at rigging my tiller a few posts back, one problem I had was neatly seizing the blocks. Things just got worse as to help with the scale, I've reduced the my block size to 3mm from 4mm and I am also using much thinner seizing thread as Brian recommended. Now I bought Chuck's Serv-o-matic during his recent sale and thought of a way this past weekend to use it to help me seize my blocks. Perhaps this is old stuff to many, but figured I'd share in case it helps someone. Pictures tell the story, but I clamped some 3/16in brass tubing to the gears using some 3/16in drill stops. I then glued some connector clips to the 3/16in brass tubing. These fixtures, that are quickly removable, allowed me to hold the small hook and block firmly and use the Serv-o-matic to seize the block. I still need a lot more practice, but you can see in the final picture there is some neater seizing starting to emerge. The looser part you can see was because I removed the block from the machine before the 50/50 glue mix had dried fully and the rope loosened slightly. Fewer turns may help things look neater as well. Anyway, I think I now have a way to seize these small blocks neatly and also much faster. Acid test will be when I try to use the 2mm blocks I bought to do my cannons! Hope you found this of some interest...now it's back to my rigging which is proving pretty fun! Cheers, Nigel.
  25. UpstateNY
    Hi Nenad, Really like the way you have planned and then worked through making these panels. Great work and the result is wonderful. Cheers, Nigel.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...