-
Posts
3,804 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Baker
-
Indeed, a mast top is not a crowsnest. When I was young. I (and probably many of us) dreamed to be a pirate, exploring the horizon from the crowsnest, high in the mast. Now I discover that I sat actually in a simple mast top. ☹️ My childhood dream, shattered to pieces 😲 😆 https://en.wikipedia.org/wiki/Crow's_nest https://maryrose.org/blog/in-the-museum/museum-blogger/the-mary-rose-crow-s-nest/
- 756 replies
-
- galleon
- golden hind
-
(and 2 more)
Tagged with:
-
Thanks. First the fore and the main mast will be made because they are similar. Also discovered that this ship had no "crowsnests". But mast tops. will be simple... : "looks like a large barrel" they write .... haha, dont think so https://maryrose.org/blog/in-the-museum/museum-blogger/the-mary-rose-crow-s-nest/
- 756 replies
-
- galleon
- golden hind
-
(and 2 more)
Tagged with:
-
Because I'm a bit of a dead end with my deadeyes and chains. I'm going to build the masts first. This is a completely different order from what I had in mind. So I first have to study and think about what and how. And if I have to think, I build military models. For me, this goes on automatic pilot and meanwhile the ideas come up to build my masts. Builds can be found in the shore leave category https://modelshipworld.com/forum/73-non-shipcategorised-builds/ The only examples I find for the time being is the San Juan model and the Vasa. There were one-piece masts and made masts. Somewhere I found that around 1600 in England there was no longer a suitable tree to make a one-piece mast. Fortunately my model dates from before 1600 👍 Building the lower part of the fore and main masts. Work in progress, so far so good. i think. Thanks for following
- 756 replies
-
- galleon
- golden hind
-
(and 2 more)
Tagged with:
-
A proud Patton in front of a Ft 17 Building the hull. Everything goes together smoothly. The small plastic parts are sometimes a bit brittle, so careful cutting is needed. And started on the wheel assembly The inside is pre-painted, This works easier later The groove for the idler wheel is too narrow (I know from experience of previous models) . So I make this wider Thanks for following
-
Welcome to build an American 6 ton tank. Scale 1/72 from the Polish company RPM General info (wikipedia). https://en.wikipedia.org/wiki/M1917_light_tank (This tank is roughly a fairly exact copy of the French FT17.) We build a smoke tank. Actually this is a normal 6 ton tank with smoke equipment. Probably only one model was built in 1924. I cannot find the RPM website. Fortunately there is Henk of Holland's website. If you want to find info about a military model at 1/72. This is the place to be. https://henk.fox3000.com/index2.htm https://henk.fox3000.com/Rpm.htm The only time I've seen a real FT17 was on a road trip in Finland. In the Parola tank museum https://www.panssarimuseo.fi/en/ The box, plan and content Start
-
Autoblinda AB40 Ferroviaria by Baker Italeri 1/72 FINISHED
Baker replied to Baker's topic in Non-ship/categorised builds
Thanks. The WW2 Italy corner is becoming a little overcrowded Thanks. I once built 60 of these models a year. Thanks Thanks. Not for sale. The unfortunate one who is going to inherit this. Will have a lot of work to pack and move all of this. -
Autoblinda AB40 Ferroviaria by Baker Italeri 1/72 FINISHED
Baker replied to Baker's topic in Non-ship/categorised builds
After all these Bitburgers. Time for finishing the model. A wash with diluted matte black (matte black, 50% water, 50% ipa) And some pencil here and there. Ready Numbered and registered. Italian number 37 total number 1421 The Italian corner (almost full) Thanks for following this build. Next project : a US 6 ton "smoke tank" from 1924 -
Autoblinda AB40 Ferroviaria by Baker Italeri 1/72 FINISHED
Baker replied to Baker's topic in Non-ship/categorised builds
-
Autoblinda AB40 Ferroviaria by Baker Italeri 1/72 FINISHED
Baker replied to Baker's topic in Non-ship/categorised builds
As i have zero combat experience, i can only agree with you both. My only experience is a one NATO exercise in Germany ( sept. 1983) and 2 weeks in camp vogelsang (in winter, brrrr cold 🥶) Continue with the Autoblinda (google translate translates "car blind" haha) The rail from the kit has already been used elsewhere. This one comes from the part box The base : wooden plate, plaster and the rail. The rail is pushed in the plaster. Painted dark grey Model and base painted and added some rust Dry brushed with sand. Next post is finishing the model -
Tiger 1 by marktiedens - FINISHED - Dragon - 1/35 scale
Baker replied to marktiedens's topic in Non-ship/categorised builds
I once had more than 100 kits in stock. now about 40. the cabinets with finished models, more than 1400, are starting to fill up ... -
Continue with the deadeyes. Started a topic in masting, rigging and sails first. And, continued with the "ironwork" around the deadeyes and started the chains Ironwork deadeyes, work in progress. this is not really the activity I enjoy doing most. Learned soldering at school a long time ago (Didn't like it then and still don't like it now 😂) The chains. Each chain consists of 3 links. For the time being 1 link will be added to each deadeye. The length of each chain will be different. So most of the links will have a different length. The deadeyes are in a groove in the side channel of the channel, they are not attached to the channel itself. I will probably have to make the masts (lower part) first. Or temporarily fix the deadeyes with a wooden strip that will be removed later (dont now yet) According to the dimensions of 1 archaeological find, the metal around the deadeye is slightly thinner in diameter than that of the chains. (The wire of my chain is 0.1mm too thick.) Quality control on strength (looks good 👍) Thanks for following
- 756 replies
-
- galleon
- golden hind
-
(and 2 more)
Tagged with:
-
Well done. But noncommittal comments. If these are the rigging instructions from revell, then they are wrong. Have a look at the attached photos.
- 165 replies
-
- english galleon
- revell
-
(and 2 more)
Tagged with:
-
Goedemorgen And
-
-
Autoblinda AB40 Ferroviaria by Baker Italeri 1/72 FINISHED
Baker replied to Baker's topic in Non-ship/categorised builds
Indeed. But if I were an Italian in an Autoblinda. Somewhere on a Yugoslavian railway, where partisans can attack you at any moment. Then I keep that sand for emergencies only. -
How to attach deadeyes to channels in the 16th century?
Baker replied to Baker's topic in Masting, rigging and sails
The width of the channels and the exact position of the deadeyes - schrouds has already been tested. That's not going to be the problem anymore. For now I make the deadeyes first. Then probably the masts. The chains holding the deadeyes will all have different lengths. Will be fun -
Autoblinda AB40 Ferroviaria by Baker Italeri 1/72 FINISHED
Baker replied to Baker's topic in Non-ship/categorised builds
progress Dry brushing with grey Added some extra detail. Cables. These served to operate the boxes (filled with sand) from inside the vehicle. This sand fell on the rails and provided better grip on the wheels in an emergency. Painted the wheels and other extras.
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.