-
Posts
1,658 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Knocklouder
-
-
-
-
Hi Loracs, for me , At the bottom of the page there is three little dots that say "more" click on that. Then go to the article data base, there is all the information on how to line off your hull, and planking info.
All you need to know about planking is there. I have been studying it for two years, just about got the hang of it , lol.
Good luck my friend,
-
Well I got side tracked again, lol, this time the life boat. I was getting ready to tackle the planking and saw this metal life boat, so I looked at a lot of Pegasus logs, and 9 out of ten scraped the boat.
Well every time you turn around on this ship you got to up grade, cannons, swivel guns, stove, life boat, and I have to buy more blocks if it is rigged a certain way, they don't come with the kit. Sheees.
Oh well, I can't keep buying accessories, So this is what I come up with for my life boat.
I open the plastic bag, and ll this was inside. The little peice of instructions didn't make sense. There is no bell on the life boat, and these bars are for what.lol.
Getting some ideas from the logs this is what I came up with.
I got some oars that when sanded down will look pretty good I think .
Marvin tells me to put this all away and come back to it later, I agree lol. I really want to get at my planking but there are way to many distraction. And outside work is calling again 🙄, but I am hard of hearing lol. I do plan on putting the life boat away till later in the build, this was just fun to do and I like it.
On to the planking , lol, thanks for all the help and likes.
Bob M.
-
Peter, Andrew, add a couple more and have one sleeping on a pillow at the stern, but I think that's been done before lol.
It is your boat, as far as the mast goes, it was built in 33 A. D. So it would have been pretty simple, but like I said it's your boat what ever you decide it will make your's wonderful . You will be happy with the results, great work my friend. 😬
-
It looks good to me. Once the sail and rigging is done it will be fine. I never did a thing to my mast, and it looks good . I just double checked to make sure lol.
Are you going to use amber shellac for the finish?
It looks good and easy-to-use. I got mine at Lee Valley. I mixed up 4 once, but you only need two. Great stuff. It will make the boat shine .
Regarding the rigging the two wire lines lose alot of white paint when you install them , thouch them up after you get them to how you like them, last thing I did on mine. Great work my friend.
- Bryan Woods and Glen McGuire
-
1
-
1
-
An amazing amount of detailed work on this ship, wonderful work. Will be waiting to see what is up for the next build.
- Katsumoto, Paul Le Wol and Cathead
-
3
-
Congratulations!!! Wonderful looking ship, great work.
- mtaylor, Jack12477, Keith Black and 3 others
-
6
-
-
Glad to hear you are feeling a whole lot better, but ware your mask sanding at all times, safety first 😀. Awesome work!!!
-
Great work my friend, your very good at making oceans, can't wait to see it all together. This is the most exciting part, the race to the finish, so we can start another lol. Amazing work,
- Keith Black, mtaylor, Glen McGuire and 2 others
-
4
-
1
-
Not knowing what a Nef ship was, I looked it up and looked at Louie de Fly's
log of his nef . Seeing these and looking at others here's my view. Build an early one that has free standing castels, looks better to me. But it's your ship my man, I will follow along as I know you will make it exciting no matter what you pick. Just my opinion lol.
-
So with full intention to finish the second layer of planking, I got side tracked. As soon as I had the second layer on from the whales up , I want to try out some colors I had for this. The yellow could be brighter I will see on the starboard side, I will make it brighter then pick. It's only hand painted just to see lol.
Then I found a back up Pegasus figure head, just in case the kit supplied one does look good lol.
I made my top capstan, with the holes for the pins and chains but decided not to make the chains up at this time lol.
The wheel looks good from four to five feet lol it'll do, lol. I have decided on how I think I want my Pegasus to look so here goes we will see. I can always repaint it. Lol
- Dave_E, GrandpaPhil, John Ruy and 8 others
-
11
-
- mtaylor, thibaultron, VitusBering and 2 others
-
5
-
-
Bovine Blockade of "B" words won't work on this site. Apparently the owner has a love for "BEER". LOL
- Canute, Keith Black, Glen McGuire and 2 others
-
5
-
-
20 minutes ago, gjdale said:
Don’t you mean “udderly” disgusting?
That's what I thought he wrote in the first place lol 😆,
.
- Canute, mtaylor, Keith Black and 2 others
-
5
-
Very nice work, bending the ribs are a breeze compared to the planks. Bending them and how you do it is all part of the fun, what ever works best for you. You will be able to plank anything now lol, Great job. now wasn't That Fun, LOL.
- Bryan Woods and Louie da fly
-
2
-
That is so amazing, you can even make cows look pretty LOL. You do such impressive work my friend, this will be even more impressive than your last impressive SIB, power on my friend.
🐄
- Glen McGuire, Keith Black, GrandpaPhil and 2 others
-
4
-
1
-
Welcome back that is.
- mtaylor and Keith Black
-
2
-
Thank you everyone for following along. Today the First Mate and I paid a visit to fellow member @Gabek, It was a wonderful visit. Mrs Gabek made us some delicious bannock, it was fantastic. Also Gabe and I did a little bartering, for a bit of corn, 4 dozen, a bag full of cucumbers, and a small box of Tomatoes, he made me these correct scale cannons, 20 of them and a stove that fits right into place on the Pegasus. Thank you !!!
Time to finish the second layer of planks. Then the copper. I am doing a good job on the planks, go figure when all is said and done only 1/2 of and inch of planks show on the ship. After it is coppered then painted only a few planks show, lol. But at least it is planked to the best of my ability as of to date lol.
After I got home , I ran down to the shipyard, and took all of 5 minutes to clean and paint them all. Lol
So I put everything away for now, going to do the second layer of planking, followed by the copper, then finish a little more painting. Then start rigging the cannnos, lots of work there lol. Well that's it for now, I still can't belive how much you have to change in the kit to make it look better. You buy a kit at a good price then pay a good price to upgrade, oh well that's business I guess. Lol.
On to the planking and coppering
Bob M.
- allanyed, VitusBering, Keith Black and 17 others
-
18
-
2
-
There are alot of amazing details here, nice work my friend.
- VitusBering and Rick310
-
1
-
1
-
HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023
in - Kit build logs for subjects built from 1751 - 1800
Posted
Happy belated Birthday Kevin, your ships always look so impressive, amazing work.