rafine Posted July 23, 2015 Author Share #61 Posted July 23, 2015 I've completed the starboard side topside planking. Same as the port side, but it went a little faster (the old learning curve ). Now it's on to the stern planking. Bob AnobiumPunctatum, mtaylor, Dubz and 24 others 27 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
GLakie Posted July 23, 2015 Share #62 Posted July 23, 2015 The wales turned out great Bob! Very nice planking work. Canute 1 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Mirabell61 Posted July 23, 2015 Share #63 Posted July 23, 2015 beautiful work Bob, Looks nice and clean for upper planking and wales... Nils GLakie and Canute 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
rafine Posted July 23, 2015 Author Share #64 Posted July 23, 2015 Thanks so much George, Dirk and Nils for the nice comments and also the "likes". Always appreciated. Bob Canute, egkb, Mirabell61 and 1 other 4 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
rafine Posted August 8, 2015 Author Share #65 Posted August 8, 2015 Summer is vacation time (although my family always asks what retired people take a vacation from ). As a result of the travel, progress slows considerably. I do have some new work to report. I've done the planking of the counter and the transom. The first step was to trim down the outer stern frames. I did this with a #15 Exacto saw blade initially, and then sanding sticks. The planking of both areas went relatively quickly and easily, with some shaping and bending of the planks. Next will be the fashion pieces and painting the counter. Bob augie, Remcohe, jwvolz and 21 others 24 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
Rustyj Posted August 9, 2015 Share #66 Posted August 9, 2015 That looks really good Bob! mtaylor and GLakie 2 Quote Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
rafine Posted August 9, 2015 Author Share #67 Posted August 9, 2015 Thanks so much Rusty and all of the "likes". Always appreciated. Bob mtaylor, GLakie, egkb and 1 other 4 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
NMBROOK Posted August 9, 2015 Share #68 Posted August 9, 2015 Wonderfully clean work Bob I don't know about the slow progress,the way you are going,you will have several completed builds under your belt before I have finished one Kind Regards Nigel mtaylor, RichardG, GLakie and 2 others 5 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
rafine Posted August 9, 2015 Author Share #69 Posted August 9, 2015 Thanks so much Nigel and the "likes". I'd slow down Nigel if I thought that by doing so it would make anything I do look like your Mordaunt. Bob egkb, Canute, mtaylor and 1 other 4 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
dgbot Posted August 10, 2015 Share #70 Posted August 10, 2015 Bob I just came across your build and I would like to say that is one of the neatest planking jobs that I have seen in quit awhike. David B GLakie, Canute and mtaylor 3 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/ Link to comment Share on other sites More sharing options...
rafine Posted August 10, 2015 Author Share #71 Posted August 10, 2015 Thanks so much John and David for the very nice comments and also to the "likes". John, I promise that I didn't try to sneak it by you. Bob Canute and GLakie 2 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
rafine Posted August 12, 2015 Author Share #72 Posted August 12, 2015 Some further progress at the stern. First, I painted the counter planking red. Then I cut the fashion pieces from a boxwood sheet, bent them to shape and glued them in place. Bob fatih79, augie, CharlieZardoz and 20 others 23 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
Chuck Posted August 12, 2015 Share #73 Posted August 12, 2015 That looks very good. Well done!! Canute 1 Quote Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
augie Posted August 12, 2015 Share #74 Posted August 12, 2015 Beautiful work on those fashion pieces. Canute 1 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
GLakie Posted August 12, 2015 Share #75 Posted August 12, 2015 Very nice Bob. She's looking great! Canute 1 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
rafine Posted August 12, 2015 Author Share #76 Posted August 12, 2015 Thanks so much Chuck, Augie, George and the "likes". Bob GLakie 1 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
rafine Posted August 24, 2015 Author Share #77 Posted August 24, 2015 Back from another summer trip and eager to to get back to Cheerful. I chose to deviate from the sequence that Chuck and the other Cheerful builders have followed at this point. Rather than doing the wales and the lower planking, I decided to treenail the upper planking. My reasoning was simple -- I hate to do all of the treenailing at once, and this allowed me to break it up. The treenailing was done by the drill and fill method, but I chose to use a more visible filler, rather than the subtle ( and likely more accurate) route taken by Chuck. I must admit that I simply like the look of the more visible treenails better. After completing the treenails, I applied a coat of Wipe-on Poly as a sealer. Now I will move on to the wales and lower planking. Bob augie, Rustyj, Senior ole salt and 29 others 32 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
Mirabell61 Posted August 24, 2015 Share #78 Posted August 24, 2015 beautiful treenailing and planking Bob, very clean and good looking hull ! Nils Canute, GLakie and mtaylor 3 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
NMBROOK Posted August 24, 2015 Share #79 Posted August 24, 2015 Excellent work Bob The treenailing looks great,to be honest,I have used every material for doing these bar fishing line,but I don't think the filler route looses anything to the others unless you are after a structural fixing Kind Regards Nigel Canute, Kevin, mtaylor and 1 other 4 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
GLakie Posted August 24, 2015 Share #80 Posted August 24, 2015 Superb job on the planking and tree-nailing Bob. She looks great. mtaylor and Canute 2 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Kevin Posted August 24, 2015 Share #81 Posted August 24, 2015 Good evening Bob doesn't that look wonderful, Maybe one day kevin you could do something like that mtaylor and GLakie 2 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
rafine Posted August 24, 2015 Author Share #82 Posted August 24, 2015 Thanks so much Nils, Nigel, George and Kevin for the very kind comments and also to the "likes". Bob GLakie, Canute and mtaylor 3 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
Gahm Posted August 25, 2015 Share #83 Posted August 25, 2015 Beautiful tree nailing work, Bob! I love the slightly stronger contrast between nails and planks. Otherwise, if you don't see the nails, why do all the work? Thomas mtaylor and GLakie 2 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
gjdale Posted August 25, 2015 Share #84 Posted August 25, 2015 Now that is just lovely Bob! Canute, mtaylor and GLakie 3 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
augie Posted August 25, 2015 Share #85 Posted August 25, 2015 I like it as well. Welcome home! mtaylor and GLakie 2 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
rafine Posted August 25, 2015 Author Share #86 Posted August 25, 2015 Thanks so much Thomas, Grant, Augie and the "likes". Right or wrong Thomas, that's how I feel as well. Bob mtaylor, GLakie, Canute and 1 other 4 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
rafine Posted August 31, 2015 Author Share #87 Posted August 31, 2015 Work on the planking continues. I've now added the second layer of the wales and painted them black, and done the first two strakes of the lower planking, including the drop plank. Those lower strakes were given a rough sanding. If I had it to do again, I would probably not add the second wale layer until after doing the lower planking, since the the paint got pretty nicked up and will require extensive touch up later. In any event, I will now move on to the remainder of the first belt of lower planking. Bob Gahm, egkb, CaptMorgan and 24 others 27 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
augie Posted August 31, 2015 Share #88 Posted August 31, 2015 Sorry about the paint nicks... seems to be an occupational hazard. But nice work on the drop planks. Canute, mtaylor and GLakie 3 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
druxey Posted August 31, 2015 Share #89 Posted August 31, 2015 Masking tape might have prevented scratching up the paint on the wale. Next time? Kurt Johnson, mtaylor, Canute and 2 others 5 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
GLakie Posted August 31, 2015 Share #90 Posted August 31, 2015 Nice work on the planking Bob! Looks great. mtaylor and Canute 2 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.