Jump to content

HMS Blandford by hamilton - FINISHED - from Corel HMS Greyhound - 1:100


Recommended Posts

Well everyone, I'm on the home stretch. The rigging is complete and I installed the anchors over the last couple of nights. Now it's just making sweeps for the next week or so until I have 36. I made a prototype which needs detailing and finishing, but I think I've worked out a good process for carving them to a standard out of single 90mm strips of 2mm x 4mm walnut. The wood is hard enough to tolerate the work at a small scale and the darker tone of the walnut provides a good contrast. I will follow an early suggestion and finished the ends of the blades in white. The photo Ian posted above shows red sweeps - I was tempted to go this route, but in the end I think I like the natural wood tone better.....

 

Photos to come soon. Bye for now

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

  • 3 weeks later...

Well my optimism has been defeated again....I've still not completed Blandford, though I'm so tantalisingly close that it's becoming painful. As of this evening, I've finished my courses for the semester, which means my schedule will be much more flexible - long hours of work still, but more reasonably paced than during the regular academic year....

 

However, before the modelling can continue, we're off to Maui (while we get our kitchen redone....I tried sneaking in some plans for a modelling nook to our contractors but the admiral wouldn't have it....) for some brief vacation time. When I get back my first priority (after washing my hair) is finishing this damnable model!!

 

Hope you're all well....final stages to come and then it's on to OcCre's Dos Amigos/Fair Rosamund....a different kind of build....looking forward to something more or less straightforward...

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Hi Hamilton

I'm jealous - a new kitchen being made while you have a holiday in Maui!!! We should all be so blessed B).

 

Your finishing work on Blandford can surely wait for these dual pleasures  - I'm happy to wait to see it finished any old time and I am looking  forward to your next build(s) as well.

Cheers

Alistair

 

Current Build - HMS Fly by aliluke - Victory Models - 1/64

https://modelshipworld.com/topic/34180-hms-fly-by-aliluke-victory-models-164/

Previous Build  - Armed Virginia Sloop by Model Shipways

 

Previous Build - Dutch Whaler by Sergal (hull only, no log)

 

Link to comment
Share on other sites

  • 4 weeks later...

Really amazing work Hamilton.  I'm in the early stages of modifying the Corel Unicorn, and your log details of your trials and tribulations have really helped open my eyes to some of the pitfalls I should expect :)

 

Your approach to the stern galleries worked out very nicely.  I think I'm going to do something very similar.  Can I ask you to repost the pictures on how you scratched the transom?  That's the one area that I've been struggling with, and it would be of great help to see your pictures if you still have them.  I think the post is on page 13 or 14 of your log.

 

Thank so much!

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Thanks Mike:

 

I'll try to re-post this evening - the transom was a bit experimental - the approach I took might work for you on the structural level, though the aesthetic might either be a bit off for your Unicorn specifically or for its period - what year was the Unicorn? BE pointed out earlier that the diamond-shaped windows that I used for my transom are not accurate for the period - I was using the (later) Belonna transom as a guide here, though she was half a century later on....

 

I will see if I can't re-post the photos later this evening (Pacific Standard Time). Thanks again for dropping by.

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Thanks very much Hamilton, no worries if it is too much trouble.  I'm mostly interested in how you handled the structural issues.  

 

The Unicorn was around 1748-1771, so if I remember correctly the details about the Blandford, the Blandford preceded the Unicorn.  I have the AOTS books on the Blandford and the Pandora (which came after the Unicorn), which have been helpful to me in thinking about some of the modifications).  Since the Unicorn fell in between both ships period wise, I figure I should be ok :)

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Hi Mike:

 

I've just re-loaded the photos to the log - page 12. Check it out

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Well she's done (mostly). I'll leave it to the keen-eyed among you to spot the one still-missing element, which I plan to add tomorrow after a bit of touching up.....just think of it as a little easter egg for you all to discover.

 

General impressions of the kit - pretty bloody poor in many ways, though in others perfectly fine. I would NEVER recommend this kit as a first build or even a second or third....it was my twelfth and a lot of sweat and frustration (though not as much blood as you'd think) went into the 14 months spent building it. The plans and instructions were probably the worst I've seen. However, with good resource material (Goodwin and Lees) and the fine advice and encouragement of folks on this forum, it can be done even by the hopelessly butter-fingered!

 

Despite the shortcomings of the kit, the challenge it provided was what made it compelling - not that I recommend to manufacturers that they make their kits worse just to provide some interest! But overall, though I wouldn't build it again, I would recommend it to anyone looking for a nice little kit to heavily bash.

 

Of the three builds of this kit I've seen here - Harlequin's, Collingwood's and my own - I'm surprised to see how many unique interpretations of the kit there can be. All of our builds are very different - and though I haven't seen an update from Collingwood lately, I sincerely hope he'll start posting again because his bash of the kit was shaping up to be really great.

 

Anyway, here are a couple of photos (others are in the completed build gallery) - thanks for all your help along the way, people - I hope you'll tune into the next one, which may wait a bit to start, depending on a variety of different things. In the meantime, I will finally get back to sitting around watching all of you work a bit! 

hamilton

 

post-304-0-91172800-1400743154_thumb.jpg

 

post-304-0-96395200-1400743200_thumb.jpg

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Congratulations Hamilton on a really beautiful build. I echo B.E.'s sentiments on how impressive it is at such a small scale.I look forward to your next, whenever it may be.

 

Bob

Link to comment
Share on other sites

Hi Hamilton,

 

I logged onto MSW this morning to see the thumbnails on the home page of what was a gorgeous model recently added to the completed gallery.  I was really happy to see that it was your Blandford.  :)  Really amazing work, especially at that scale.  I think I've gone permanently cross-eyed from working at 1:64 - I can't imagine what you went through at 1:100  :huh:   The sweep ports in particular are a really nice touch to your model.  Gardiner's new Frigate book has a picture on the cover of a model with the sweep ports and oars, and yours looks every bit as good as the one on the book's cover.

 

Thanks very much for adding back the pictures to your log.  Your approach gives me a lot to work with when it comes to scratching the stern on my Unicorn.

 

What's next for you?  I see you have the Hannah SIB kit - have you started it?  I've been working on mine in fits and starts over the last year or so, and finished the hull a few months ago.  I am complicating things for myself by trying to add the "sea" to the bottle, which is very hard to do given the tiny opening of the bottle. 

 

Congratulations again, and thanks very much for sharing your journey!   

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Thank you Andy, BE, Bob, Ferit, Mike, Richard and Crackers! All comments much appreciated! It seemed to take forever at the end! But ultimately I'm very happy with the results, though as usual it does not completely match the picture in my head....

 

Mike - the Hannah will have to wait until next summer, I think - a quick little summer project. In the meantime, I'm moving on the OcCre Dos Amigos/Fair Rosamund and then Mamoli's Yacht America - both are gifts - the first for a friend's 8-year old who's been at me for a while for one of these and the second for an old friend of my wife's who's also been on my case.....As long as these people keep asking me to build model ships for them, I can always rationalise one more purchase to the Admiral.....

 

I almost bought (but chickened out) the LSS Hannah that Floyd Kershner was advertising on this site last week....I'm now sincerely regretting that I didn't buy it.....these kits aren't being produced anymore it seems, and are apparently of very high quality....

 

Anyway, thanks again to all - expect a new build log for the Fair Rosamund to appear in the next week or so....hope to see you all there

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Congratulations on a very fine model. It is really impressive. Well done.

 

Russ

Link to comment
Share on other sites

Thank you Russ

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Congratulations and a very well done, Hamilton. post-76-0-81434900-1400990748.gif

 

I don't have a clue on the missing part what I see is great!!!!!

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thanks Mark - it's the figurehead!! I'm going to stick a lump of metal on there sometime over the weekend and call it a day!

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

  • 1 month later...

Thanks Harlequin - whenever you're ready! Looking forward to seeing more of the Bellona

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

  • 5 weeks later...

Hi there:

 

It seems I've had to divide this post in two - I was having trouble uploading some of the photos in the last post - not sure why....let's try again

hamilton

 

attachicon.gif7-grating & aft thwarts.jpg

 

attachicon.gif8-profile.jpg

 

attachicon.gif9-thwarts.jpg

 

attachicon.gif10-cap rails.jpg

 

attachicon.gif11-finished.jpg

 

attachicon.gif12-finished.jpg

 

attachicon.gif13-finished.jpg

 

 

nice work....bellissima, bravo

Gianni

Link to comment
Share on other sites

Grazie Gianni!

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

  • 2 months later...

;Nicely done, congrats....sorry I missed some of it...

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...