amateur Posted June 6, 2017 #31 Posted June 6, 2017 That isnot true for the Netherlands. at import, there is 6% VAT, and that is over the bookprice, including the costs of transport. Jan Canute and tkay11 2
tkay11 Posted June 7, 2017 #32 Posted June 7, 2017 Sorry about that, Jan. My lack of knowledge. I thought that it was because we were in the EU that there were no customs charges on books. Tony Canute 1 === First build: Caldercraft HM Cutter Sherbourne 1763 FINISHED 2nd build: Triton cross-section COMPLETED 3rd build: La Chaloupe Armée / 42ft Armed Longboat of 1834 by tkay11 – scale 1:36, plans by M. Delacroix COMPLETED 4th build: Allège d’Arles 1833 (Ancre) POB by tkay11 – scale 1:100, plans by F. Fissore COMPLETED Working on La Jacinthe 1:96 POB (ANCRE publications)
Ainars Apalais Posted June 25, 2017 Author #33 Posted June 25, 2017 On 6/6/2017 at 11:06 AM, tkay11 said: There are no taxes on the books into the EU or UK at the moment (while the UK is still in the EU). It's just the shipping that's expensive. I asked one of my relatives to bring the books over with him from the USA when he was visiting. If you're visiting or based in London you can PM me and you could visit to see the books in my home. Tony Thanks mate. But I'm finally Decide going to order it from the United States. I know that it will be a little more expensive. But losing a few extra pounds not will be end of the world:) In any case once again Thank you. tkay11, Canute and mtaylor 3
Ainars Apalais Posted November 12, 2018 Author #34 Posted November 12, 2018 Hi. Finally decide update my topic with couple picture. I have not done much. But that's better than nothing:) Bluto 1790, Gabek, AnobiumPunctatum and 12 others 15
ChadB Posted November 24, 2018 #35 Posted November 24, 2018 Very nice work so far!!!!! Chad tkay11 and Canute 2 Completed Models: Triton Cross Section In Progress: Brig Eagle
Ainars Apalais Posted August 9, 2019 Author #36 Posted August 9, 2019 A few more step forward. Tigersteve, Captain Poison, Edwardkenway and 8 others 11
ChadB Posted September 6, 2019 #37 Posted September 6, 2019 Fantastic joinery! You are doing an amazing job!! Completed Models: Triton Cross Section In Progress: Brig Eagle
Ainars Apalais Posted September 8, 2019 Author #38 Posted September 8, 2019 On 9/6/2019 at 11:02 PM, ChadB said: Fantastic joinery! You are doing an amazing job!! Thanks mate. It is your model that inspires me. mtaylor 1
Ainars Apalais Posted October 29, 2019 Author #39 Posted October 29, 2019 (edited) Hi all Ship mates. Small update of my work progress. And couple more bits & pieces Edited October 29, 2019 by Ainars Apalais Tigersteve, mtaylor, shipcarpenter and 14 others 17
Edwardkenway Posted October 29, 2019 #40 Posted October 29, 2019 Superb job Ainars. It is looking marvellous. 😃 mtaylor 1 Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
ChadB Posted October 31, 2019 #41 Posted October 31, 2019 Well done-beautiful work so far! mtaylor 1 Completed Models: Triton Cross Section In Progress: Brig Eagle
mtaylor Posted November 3, 2019 #42 Posted November 3, 2019 Very impressive work, Ainars. Edwardkenway 1 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Ainars Apalais Posted November 8, 2019 Author #43 Posted November 8, 2019 Thank you all for watching and the nice comments. mtaylor and Edwardkenway 2
Ainars Apalais Posted January 7, 2020 Author #44 Posted January 7, 2020 A couple of steps more forward Dubz, Bluto 1790, CaptMorgan and 12 others 15
Gabek Posted January 19, 2020 #45 Posted January 19, 2020 Beautiful work, Ainars! mtaylor 1 Current builds: Harvey, Baltimore Clipper - Artesania Latina HMS Triton Cross Section, 18th Century Frigate - online scratch build HMCS Agassiz, WW2 Flower-Class Corvette - HMV - card model Completed: Swift, Pilot Schooner - Artesania Latina --- Build log --- Gallery Skeeter, Ship-in-Bottle - Ships a Sailin' kit --- Build log Santa Maria, Caravel - Artesania Latina --- Build log
Ainars Apalais Posted January 21, 2020 Author #46 Posted January 21, 2020 On 1/19/2020 at 1:14 PM, Gabek said: Beautiful work, Ainars! Thanks Gabek. I look at your project sometimes also. And I wonder how it can be done on such a small scale. Gabek and mtaylor 2
Ainars Apalais Posted February 3, 2020 Author #47 Posted February 3, 2020 Finally finished gun dec. And are ready for planking. Bluto 1790, shipcarpenter, Edwardkenway and 8 others 11
Edwardkenway Posted February 4, 2020 #48 Posted February 4, 2020 Just exquisite woodworking Ainars😃 Gabek 1 Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
mtaylor Posted February 5, 2020 #49 Posted February 5, 2020 Beautiful work, Ainars. Very crisp and clean. Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Ainars Apalais Posted February 9, 2020 Author #50 Posted February 9, 2020 Thanks guys for comments. Only i had so imagined that I would finish it much quicker. But there is so much more to be done. mtaylor 1
Ainars Apalais Posted May 2, 2020 Author #51 Posted May 2, 2020 Small progress update. mtaylor, Ondras71, oneslim and 6 others 9
Ainars Apalais Posted May 16, 2020 Author #52 Posted May 16, 2020 (edited) Hi When I started this project, I was most afraid how i will make brass Gangway brackets. I had never really worked with brass and don't have any experience with soldering. After many attempts its looks quite good/for me:)/ When the brakets are installed Edited May 16, 2020 by Ainars Apalais tkay11, Ondras71, Tigersteve and 10 others 13
MEDDO Posted May 16, 2020 #53 Posted May 16, 2020 wow first time you say... those look awesome mtaylor 1 Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL
Ainars Apalais Posted May 18, 2020 Author #54 Posted May 18, 2020 On 5/16/2020 at 8:54 PM, MEDDO said: wow first time you say... those look awesome Thanks Meddo. mtaylor 1
AnobiumPunctatum Posted May 23, 2020 #55 Posted May 23, 2020 Your section is looking fantastic mtaylor, Lynn Young and Ainars Apalais 3 Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali
DocBlake Posted May 23, 2020 #56 Posted May 23, 2020 Very nice job! Outstanding metal work! Ainars Apalais and mtaylor 2 Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
Ainars Apalais Posted May 26, 2020 Author #57 Posted May 26, 2020 Thanks Gents for watching and nice comments. mtaylor 1
Ainars Apalais Posted October 31, 2020 Author #58 Posted October 31, 2020 Hi there Finally finishing all outside works on my model. Edwardkenway, pjofc4, oneslim and 11 others 14
Matt D Posted October 31, 2020 #59 Posted October 31, 2020 It looks fantastic! Your work is very precise. How did you drill those mounting holes so perfectly horizontal and correctly spaced? Canute and DocBlake 2 Current Build: HMS Winchelsea 1:48 (Group Project) Completed Builds: Virginia 1819 Artesania Latina - 1:41
Ainars Apalais Posted November 2, 2020 Author #60 Posted November 2, 2020 Thanks Matt D. To mark up positions for mounting holes i cover required area with masking tape. After a couple of attempts i draw pretty straight and equal positions to drill holes. Canute, mtaylor and Matt D 3
Recommended Posts