alde Posted December 9, 2017 #91 Posted December 9, 2017 Your sure making some progress. She looks great. Tigersteve 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Tigersteve Posted December 10, 2017 Author #92 Posted December 10, 2017 (edited) 1/16" x 1/32" maple strips were soaked in hot water for several minutes to create the curved base moulding around the supports. 1/8" x 1/32" maple strips were used for the vertical moulding. Some minor adjustments are needed before installation. Steve Edited December 10, 2017 by Tigersteve Dfell, MEDDO, jct and 15 others 18 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
jct Posted December 13, 2017 #93 Posted December 13, 2017 Nice work...looking sweet CaptainSteve and Tigersteve 2 Quote Thx J In process On Hold US Brig Niagara Model Shipways Pinta ...Shipyard, card build; In the Queue HMS Endeavor...Corel; Completed builds Agilis...Steingraeber, Dual build with Popeye USS Hannah...scratch build to something between 1/72 ish and 1/60 ish scale Corel's...Half Moon; USN Picket Boat #1...Model Shipways; Model shipways...18th Century longboat.. Harriet Lane...Model Shipways Henry J Gasser Keeling-and-Clayton-mustang-funny-car Green Elephant Funny car Curtiss Sparrowhawk
Blue Ensign Posted December 14, 2017 #94 Posted December 14, 2017 Nice touch Steve B.E. CaptainSteve and Tigersteve 2 Quote Current Build: Medway-longboat-1742-by-blue-ensign-½”-scale Completed builds: HMS Indefatigable-1794-by-blue-ensign-vanguard-models-1:64-scale HMS Sphinx 1775 by Blue Ensign. 1:64 scale - Vanguard Models Queen-Anne-Royal-Barge-circa-1700-by-Blue-Ensign Fifie fishing boat Lady Eleanor Muirneag-1903-–-a-scottish-zulu-fishing-boat-164-scale-based-on-the-vanguard-models-zulu-kit/ HM Cutter Alert 1777 HM Cutter Cheerful 1806 18th-century-English-longboat-by-Blue-Ensign-ms-148-scale/ 18thc English Pinnace by Blue Ensign-Model-Shipways-1:24 scale/ HMS-Pegasus-by-Blue-Ensign-finished-Victory-Models-1:64-scale/ Heller Seventy-four 1:150 scale - modified Le Superbe/Le Glorieux kit after Boudriot, waterline setting with sails. The schooner Pickle, Jotika pob kit 1:64 scale, my interpretation.
Tigersteve Posted December 30, 2017 Author #95 Posted December 30, 2017 Thought I'd take a small break from painting to dry-fit all parts again. While there are several more coats that need to be applied, I believe it's getting closer to an acceptable finish. In this dry-fit I am looking at the thwarts and questioning if they butt up against the frames enough. I feel I may need to redo these so they butt up against the frames more. Any thoughts fellow Pinnace builders? Will this be a problem during inboard planking? Steve Karleop, Heronguy, mikiek and 12 others 15 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
MEDDO Posted December 30, 2017 #96 Posted December 30, 2017 Looks great. I think they would only be a problem if the gap is larger than the width of the inner planking. Tigersteve 1 Quote Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL
mikiek Posted December 30, 2017 #97 Posted December 30, 2017 3 hours ago, Tigersteve said: Thought I'd take a small break from painting to dry-fit all parts again. While there are several more coats that need to be applied, I believe it's getting closer to an acceptable finish. You were reading my mind. I couldn't figure how you were going to paint everything. Never realized that things weren't glued yet. Tigersteve 1 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
Stuntflyer Posted December 30, 2017 #98 Posted December 30, 2017 (edited) Steve, Looking at the instruction photos, it appears that the thwarts butt against the frames. Mike Edited December 30, 2017 by Stuntflyer Tigersteve 1 Quote Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey
Mirabell61 Posted December 30, 2017 #99 Posted December 30, 2017 nice work Steve, your pinnace looks great.. Nils Tigersteve 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Tigersteve Posted January 2, 2018 Author #100 Posted January 2, 2018 Thanks everyone! I will remake some of the thwarts. Mike is correct. They should butt up against the frames. Installed the stern post, cockpit seats, and seat supports. Steve rafine, Blue Ensign, EricWilliamMarshall and 10 others 13 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Tigersteve Posted January 5, 2018 Author #101 Posted January 5, 2018 (edited) The thwarts were recut and scrap wood was used to keep the proper spacing according to the plans. The grooves were made with a hand razor saw and miter box. After all thwarts were cut and placed, I used a scrap piece of the same width to mark the center lines for the longboard. The notches were filed last. Here's a photo after two coats of Wipe-on-Poly. I plan to glue all this together prior to installation. Steve Edited January 5, 2018 by Tigersteve wool132, Ryland Craze, Archi and 8 others 11 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Tigersteve Posted January 6, 2018 Author #102 Posted January 6, 2018 (edited) Luckily I did another dry-fit before any gluing. Turns out there was an error in marking the longboard location on the thwarts. Either that or I misfiled the notches. I should be able to redo two of the four thwarts and be more on point. This particular modification with the longboard is tricky. A slight error becomes very obvious. This revision will take a while. I will post after all is installed. Steve Edited January 20, 2018 by Tigersteve Tom E, EricWilliamMarshall, Nikiforos and 4 others 7 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Tigersteve Posted January 20, 2018 Author #103 Posted January 20, 2018 (edited) Instead of notching the thwarts to accept sections of the longboard, I decided to notch one long strip where the thwarts would be inserted. This resulted in a straight board. Something I was not able to achieve in earlier attempts. The board was clamped from underneath and marked before filing the notches. The thwarts were also notched to create a flush joining of the pieces. Lots of dry clamping before the final installation. I'm happy with the results and decided not to include the grooves for the sake of a crisp finish. I will have to remake the forward platform without the grooves. Steve Edited January 20, 2018 by Tigersteve MEDDO, mikiek, Stuntflyer and 10 others 13 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
MEDDO Posted January 20, 2018 #104 Posted January 20, 2018 Very nice solution. CaptainSteve and Tigersteve 2 Quote Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL
mikiek Posted January 20, 2018 #105 Posted January 20, 2018 Ditto that Steve - did I understand correctly, you filed those notches? CaptainSteve 1 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
Tigersteve Posted January 20, 2018 Author #106 Posted January 20, 2018 Thanks guys. Yes, but the time consuming part was marking the correct spots and dry-fitting. Steve JesseLee, CaptainSteve and Mirabell61 3 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Tigersteve Posted January 20, 2018 Author #107 Posted January 20, 2018 I decided to omit the cockpit trunk and installed seating as per the example I presented in an earlier post. I also completed the forward platform. Inboard planking is next. Steve KenW, mikiek, JesseLee and 10 others 13 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
MEDDO Posted January 21, 2018 #108 Posted January 21, 2018 Very nice progress. I am following along closely as I should have some time soon to get back to my build. Tigersteve and Osmosis 2 Quote Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL
Osmosis Posted January 26, 2018 #109 Posted January 26, 2018 Very nice Steve. Your joinery is wonderful. Tigersteve 1 Quote Art Smith Current Build: E.M. White Guide Canoe - Canoe Model Kits, San Francisco Cross Section - Artesania Latina Completed: Peterboro Canoe - Midwest , Hobbyzone Organizers and Building Jigs, Guns of History Naval Smoothbore, 1st Build: Midwest Sakonnet Daysailer
Tigersteve Posted February 4, 2018 Author #110 Posted February 4, 2018 (edited) The inboard planking will be completed in sections due to the multiple curves required from bow to stern. I planked the cockpit section with pre-painted 1/16” and 1/8” strips. These will be filled and repainted when the rest of the planking is complete to hide any seams. I am using basswood for this part of the planking. Steve Edited February 4, 2018 by Tigersteve Chuck, Dee_Dee, EricWilliamMarshall and 12 others 15 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
MEDDO Posted February 4, 2018 #111 Posted February 4, 2018 Looking real nice. Any particular reason switching to basswood at this time? Quote Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL
Tigersteve Posted February 4, 2018 Author #112 Posted February 4, 2018 (edited) That is a good question. I thought that the basswood was much more flexible and easier to bend and it will be painted anyway. (I had forgotten just how much after working with the maple.) I will use mostly 1/8” x 1/32” for the remaining inboard planking. Steve Edited February 28, 2018 by Tigersteve Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Tigersteve Posted February 8, 2018 Author #113 Posted February 8, 2018 Another photo to illustrate the interior planking process. Midsection planks pre-painted and installed. Steve KenW, Heronguy, Blue Ensign and 8 others 11 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
MEDDO Posted February 9, 2018 #114 Posted February 9, 2018 I like the color and the pre-painting seems like a good idea at this stage to avoid the inevitable slop/bleed onto the thwarts and seats. Tigersteve 1 Quote Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL
mikiek Posted February 9, 2018 #115 Posted February 9, 2018 Steve - I'm reading a nautical oriented book taking place around the Revolutionary War. The guys are doing a lot of rowing around. Every time I read a section like that I picture this boat. Tigersteve 1 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
Tigersteve Posted February 21, 2018 Author #116 Posted February 21, 2018 (edited) The inboard planking at the bow was completed by cutting pieces to shape. The curves needed were too extreme to edgebend. My paint job went to hell during the sanding of the cap rail. It is necessary to get the rail as thin as possible to avoid looking bulky. The overlap of the rail outboard is 1/32”. My original plan was to leave the cap rail natural, but it looks unfinished without paint now that I see it installed. It will take some time to paint so here are some photos in the meantime. Steve Edited February 22, 2018 by Tigersteve JesseLee, Dee_Dee, CaptainSteve and 12 others 15 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Mirabell61 Posted February 21, 2018 #117 Posted February 21, 2018 beautiful work Steve, Nils Tigersteve 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Blue Ensign Posted February 21, 2018 #118 Posted February 21, 2018 Looking good Steve, I found I was constantly touching up the inboard paintwork, and you’ve got the mouldings to apply yet Nice job on the port side capping rail. Tigersteve and CaptainSteve 2 Quote Current Build: Medway-longboat-1742-by-blue-ensign-½”-scale Completed builds: HMS Indefatigable-1794-by-blue-ensign-vanguard-models-1:64-scale HMS Sphinx 1775 by Blue Ensign. 1:64 scale - Vanguard Models Queen-Anne-Royal-Barge-circa-1700-by-Blue-Ensign Fifie fishing boat Lady Eleanor Muirneag-1903-–-a-scottish-zulu-fishing-boat-164-scale-based-on-the-vanguard-models-zulu-kit/ HM Cutter Alert 1777 HM Cutter Cheerful 1806 18th-century-English-longboat-by-Blue-Ensign-ms-148-scale/ 18thc English Pinnace by Blue Ensign-Model-Shipways-1:24 scale/ HMS-Pegasus-by-Blue-Ensign-finished-Victory-Models-1:64-scale/ Heller Seventy-four 1:150 scale - modified Le Superbe/Le Glorieux kit after Boudriot, waterline setting with sails. The schooner Pickle, Jotika pob kit 1:64 scale, my interpretation.
Tigersteve Posted February 22, 2018 Author #119 Posted February 22, 2018 Thanks guys. I added a revised photo in my previous post. Had to remove the cap rail behind the seat back. The shapes were loosing symmetry after more sanding and filing. Those sections of the cap rail were recreated and will be installed after I touch up the paint in that area. Steve Ryland Craze, EricWilliamMarshall, CaptainSteve and 3 others 6 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Tigersteve Posted February 27, 2018 Author #120 Posted February 27, 2018 (edited) The interior and cap rail painting is complete. Roughly twenty coats later with light sanding between some coats. One coat of Wipe-on-Poly applied. Looking forward to seeing how it looks with the mouldings added. Before that tedious job, I will craft the seats for the helmsmen. Steve Edited February 27, 2018 by Tigersteve Tom E, EricWilliamMarshall, JpR62 and 10 others 13 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.