Peta_V Posted June 21, 2019 Author Share #31 Posted June 21, 2019 1 hour ago, DPK said: 2 possibilities: The latrine doors are not 90 degrees to the keel frame or the details did not set completely into each others' slots. I think it is solved. It both (doors and timber) needed a small alignment. Thanks a lot pointing it out before it was late! 👍 ccoyle, Heronguy, coxswain and 4 others 7 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
DPK Posted June 21, 2019 Share #32 Posted June 21, 2019 (edited) Looks almost OK to me. But I think it is not yet completely in place: look at the upper line of the top timbers transiting into the latrine door. It should be "jagged smooth". Have a look at the photos in the instruction! Edited June 21, 2019 by DPK James H, coxswain and Elijah 3 Quote Link to comment Share on other sites More sharing options...
Peta_V Posted June 21, 2019 Author Share #33 Posted June 21, 2019 I see what you mean, loks like I glued the last timber little bit lower. But that should not be a big issue I hope. I can put there piece of plywood in case it will be necessary. Thanks for the note! Progressing with the stern. This one was tricky to fix the correct bended shape. I love how the pear wood works together with Black wood. Ekis, Dutchman, coxswain and 8 others 11 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
etsinko Posted June 21, 2019 Share #34 Posted June 21, 2019 Really great build! Very inspiring. Can't wait to start mine.. Peta_V 1 Quote Finest ship kits & fittings - http://craftysailor.com Link to comment Share on other sites More sharing options...
Peta_V Posted June 24, 2019 Author Share #35 Posted June 24, 2019 On 6/22/2019 at 1:44 AM, etsinko said: Really great build! Very inspiring. Can't wait to start mine.. Hi Etsinko, Thanks fot the comment. I'm sure you will enjoy the build same as I do! And I'm looking forward to your building log! 🧐 Here I made a comparison with my Royal Caroline. It is different scale of course but it shows how small "cute" AVOS going to be. Still it will be impresive model (if I do not mess it up) coxswain, greenstone, BenD and 7 others 10 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
DPK Posted June 24, 2019 Share #36 Posted June 24, 2019 I strongly hope that the taffrel piece is not glued to the hull yet Quote Link to comment Share on other sites More sharing options...
Peta_V Posted June 24, 2019 Author Share #37 Posted June 24, 2019 Just now, DPK said: I strongly hope that the taffrel piece is not glued to the hull yet Hi, No it is not! 😮 I'm following the instructions step by step. It just fits so well without any glue or any fixing jig. Great work from designers really!! btw are you one of them? Or did you already build AVOS? Just asking that you know the process............ thanks PetaV Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
DPK Posted June 24, 2019 Share #38 Posted June 24, 2019 Well, I took part in the design, so I know the process. Btw, if there is anything that is unclear in the instruction, you are very welcome to tell. This kit's instruction worked out to be much clearer than the previous one's, but there is always a room for improvement. greenstone and JayCub 2 Quote Link to comment Share on other sites More sharing options...
Peta_V Posted June 24, 2019 Author Share #39 Posted June 24, 2019 1 hour ago, DPK said: Well, I took part in the design, so I know the process. Btw, if there is anything that is unclear in the instruction, you are very welcome to tell. This kit's instruction worked out to be much clearer than the previous one's, but there is always a room for improvement. Then huge respect and big thank for your work. You guys created truly master piece. I agree, the instructions are OK and easy to follow so far. The only thing I found so far is wrong numbering in one paragraph in text instructions. I believe instead of A29 should be A59 as A29 is different part used during stern construction. It is OK in photo book as well as in list of parts but one can easily figure this out. I have the text version from May 2019 so I believe up to date? PetaV Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
DPK Posted June 24, 2019 Share #40 Posted June 24, 2019 Thank you very much, you are quite right. It is a misprint: should be A59. Yes, the text is up to date. The photo instruction is better to be used downloaded from the site (it has more explanations and several small numbers corrections, although nothing critical if being careful). Quote Link to comment Share on other sites More sharing options...
Peta_V Posted June 24, 2019 Author Share #41 Posted June 24, 2019 I have the new version in PDF as well. 👌 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted June 24, 2019 Author Share #42 Posted June 24, 2019 Deck preparation. The deck is made from one piece with laser engraved planking. The base of the deck is some lower quality wood on which is pear veneer. Several reinforcements has to be glued in to shape the correct curvature of the deck and support the deck furniture. JpR62, Ryland Craze, Dutchman and 7 others 10 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted June 25, 2019 Author Share #43 Posted June 25, 2019 The bow is slowely forming. Many pieces and lot of sending but it starting showing the shape of the hull. DPK, Ekis, JpR62 and 9 others 12 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted June 25, 2019 Author Share #44 Posted June 25, 2019 During the night I have complete left side of the bow. I do not have an experience with the POF scratch build but from the builds I see here the Construction is somehow similar (much more simple but some elements are close I think) So a good practice to move level up I Just dry fited few pairs of the next ribs and the shape is awesome.... And of course I could not resist and have to dry put all the prepared parts together coxswain, JayCub, GrandpaPhil and 11 others 14 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
James H Posted June 26, 2019 Share #45 Posted June 26, 2019 Such a pretty little thing. Those forward cant frames look perfect. Peta_V 1 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48 Link to comment Share on other sites More sharing options...
Peta_V Posted June 26, 2019 Author Share #46 Posted June 26, 2019 Thanks James. The gunport alignment. Looks like I was precise enough when aligning the frames so far😲 JayCub, Ryland Craze, coxswain and 14 others 17 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Mirabell61 Posted June 26, 2019 Share #47 Posted June 26, 2019 Hi Peta, the design/construction of the Avos kit model looks realy professional thought through, great work, this is a wonderful basis for a super model... Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Peta_V Posted June 27, 2019 Author Share #48 Posted June 27, 2019 Hi Nils, thanks a lot. And also for all others likes All frames in place. Few pairs only dry fited. With a deck And this is...... My worry right now Ryland Craze, Elijah, etsinko and 15 others 18 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted June 28, 2019 Author Share #49 Posted June 28, 2019 Time to start with interior 😎 I was little bit worried about gunport alignment but luckily it looks ok. Ryland Craze, Dutchman, coxswain and 12 others 15 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Mirabell61 Posted June 28, 2019 Share #50 Posted June 28, 2019 good work Peta, nice, neat assembly so far... Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Peta_V Posted June 28, 2019 Author Share #51 Posted June 28, 2019 Hi Nils, thank you. I started with planking. Deck is glued and also inner planking. The pear looks gorgeous and it is pleasure to work with. Mirabell61, Altduck, BenD and 11 others 14 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
DPK Posted June 29, 2019 Share #52 Posted June 29, 2019 I have a feeling that the whole inner planking went a little too high. Could you please check the size of the gap between the planking and the deck? It should be completely covered by the waterways (1.5 mm thick). If the gap is too large (hope it is ok), I think the easiest way is to raise the edges of the deck in proper places a little. James H and Peta_V 2 Quote Link to comment Share on other sites More sharing options...
Peta_V Posted June 29, 2019 Author Share #53 Posted June 29, 2019 I believe it is ok. 1,5 should be enough to cover that gap but will double check that. Thanks for the comment 👍 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted June 29, 2019 Author Share #54 Posted June 29, 2019 Yep, the gap is less than 1mm on its entire lenght so There should not be an issue covering it. I think the camera made it look bigger. DPK 1 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted June 29, 2019 Author Share #55 Posted June 29, 2019 Today more framing work. I have finished the inner structure of gun ports and oar ports. The visible parts will be sanded so char will not be present. JayCub, GrandpaPhil, DPK and 11 others 14 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted July 1, 2019 Author Share #56 Posted July 1, 2019 Preparing the hull for final planking. One side is ready. Also creating the rabbet. On the left side you can see the marks. Once sanded down to this line it will form the rabbet. JayCub, goetzi73, Ryland Craze and 12 others 15 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted July 1, 2019 Author Share #57 Posted July 1, 2019 The hull is ready for the final planking. Second layer from pear etsinko, yvesvidal, JpR62 and 13 others 16 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
Peta_V Posted July 2, 2019 Author Share #58 Posted July 2, 2019 Few more layers.... JayCub, oneslim, coxswain and 15 others 18 Quote Current builds: Tender AVOS - Master Korabel HMS Royal Caroline - Panart HMS Triton - Cross section Completed: HMS Victory - Revell HMS Bounty - Revell Link to comment Share on other sites More sharing options...
yvesvidal Posted July 2, 2019 Share #59 Posted July 2, 2019 Work of art. Yves lmagna, chris watton and Mirabell61 3 Quote Link to comment Share on other sites More sharing options...
Mirabell61 Posted July 2, 2019 Share #60 Posted July 2, 2019 Hi Peta, excellent work ! its a real beauty, and the progress is lovely to follow, what a nice pricise planking !... Nils greenstone 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.