scrubbyj427 Posted May 1, 2020 Author Share #91 Posted May 1, 2020 Thanks Dvm27. im actually building it in the engine room of a yacht. I have a decent little work space for the saw and the model, not much more. I don’t get to make tons of dust like the rest of you do! FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted June 2, 2020 Author Share #92 Posted June 2, 2020 Ok I’m back on the wagon, she’s upside down and ready for lining off this week. The plank intersection at the counter has proved to be a difficult operation, I’m sure I’ll have it perfected by the end of this build. JJ Beckmann, Captain Poison, Saburo and 8 others 11 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted June 22, 2020 Author Share #93 Posted June 22, 2020 Got the first belt finished tonight, gave it a rough sanding with 120 to clean up all the glue seams and level it out. Tight seams are tough to make especially with all the curves but I’m ok with where it ended up, Lots of learning, still may go the copper plate route as I really like the finish on minerva. Chucks tic strips he provides are extremely helpful and fit my hull very well, I feel confident in lining off my next hull now. Going to start the same belt on the stbd side next week. JJ CaptMorgan, Ron Burns, JpR62 and 15 others 18 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Wacom Posted June 22, 2020 Share #94 Posted June 22, 2020 Looking really good, very tidy work. FrankWouts 1 Reg Link to comment Share on other sites More sharing options...
JpR62 Posted June 22, 2020 Share #95 Posted June 22, 2020 Superb work ! This first belt is a great success ! FrankWouts 1 Jean-Paul 'You are not carving a bear with a chain saw here folks', Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions Current builds : Medway Longboat 1742 - Syren Ship Model - 1:24 HM Cutter Cheerful 1806 - Syren Ship Model Company - 1:48 Santa Maria boat 1492 - Korabel (Ukraine) - 1:24 Captain John Smith's shallop - Korabel (Ukraine) - 1:32 Finished build : Queen Anne Barge - Syren Ship Model - 1:24 Armed Virginia Sloop - Model Shipways - 1:48 Batelina - MarisStella - 1:10 Next on list : HMS Winchelsea 1764 - Syren Ship Model - 1:48 Link to comment Share on other sites More sharing options...
Rustyj Posted June 22, 2020 Share #96 Posted June 22, 2020 Great job on the planking JJ. Looks real nice. FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
scrubbyj427 Posted June 22, 2020 Author Share #97 Posted June 22, 2020 Thanks for the comments guys, on to replicate it on the next side. Hopefully have her planked up in a month or so. JJ Rustyj, FrankWouts and Saburo 3 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted August 23, 2020 Author Share #98 Posted August 23, 2020 Today was a milestone, I finally finished the stbd side planking. It’s still in its raw state and will require much sanding before I can treat it and get it looking tidy. Quite a learning curve from previous planking jobs but the results are infinitely better. Onto the port side and hopefully chapter 3 soon. JJ Wacom, Edwardkenway, Ryland Craze and 13 others 16 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Wacom Posted August 23, 2020 Share #99 Posted August 23, 2020 That looks very good. FrankWouts 1 Reg Link to comment Share on other sites More sharing options...
Matt D Posted August 23, 2020 Share #100 Posted August 23, 2020 That looks great. How tricky was the last strake? It looks like it was in the middle or near the top of the third belt. How did you decide on that spot? I’m asking because I’ll be getting there in a month or so and I can’t see it in my mind yet. FrankWouts 1 Current Build: HMS Winchelsea 1:48 (Group Project) Completed Builds: Virginia 1819 Artesania Latina - 1:41 Link to comment Share on other sites More sharing options...
scrubbyj427 Posted August 23, 2020 Author Share #101 Posted August 23, 2020 Thanks for the comments guys. Matt, there was no real reasoning behind the last strake, I just planked the first two belts down and then started from the garboard up. I did plank one more down from the upper belts (2nd belt) to set up a smooth run for the last two strakes, I Then double checked my tick marks again to make sure nothing would look too funky with the last strake. I just had to spend a lot of time on the last strake, slowly sanding and test fitting several times until each piece fit perfectly, once the piece fit well I just charred the edges and glued it down, it actually went smoother than I thought, I was definitely nervous with that one. Now just a lot of sanding, it’s still very messy. JJ JpR62, Edwardkenway, FrankWouts and 2 others 5 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted August 23, 2020 Share #102 Posted August 23, 2020 Excellent work on the planking. I think you have a nack for it. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
Rustyj Posted August 23, 2020 Share #103 Posted August 23, 2020 Great job JJ! FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
scrubbyj427 Posted August 23, 2020 Author Share #104 Posted August 23, 2020 Thanks Chuck and Rusty! The Winnie is definitely a Turning point in my model building career, I won’t be looking back again. Quite the step up In all aspects from building regular kits. Very excited to flip her over and start on chapter 3. JJ JpR62, FrankWouts and Rustyj 3 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Trussben Posted August 23, 2020 Share #105 Posted August 23, 2020 Wow - really nice job. FrankWouts 1 Current builds: HMS Pegasus TFFM. HMS Winchelsea. Completed builds: ECHO cross section.18th C Longboat.QA Barge. Medway Longboat. Link to comment Share on other sites More sharing options...
scrubbyj427 Posted August 27, 2020 Author Share #106 Posted August 27, 2020 Thanks Ben. Port side is right behind. JJ FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted September 18, 2020 Author Share #107 Posted September 18, 2020 Tonight I finished planking, tomorrow I start sanding...a lot of sanding. JJ FrankWouts, CaptMorgan, MEDDO and 17 others 20 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted September 18, 2020 Share #108 Posted September 18, 2020 Really nice. Once sanded it will really look terrific. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
Rustyj Posted September 18, 2020 Share #109 Posted September 18, 2020 19 hours ago, scrubbyj427 said: Tonight I finished planking, tomorrow I start sanding...a lot of sanding. Looking good. You'll be surprised how quickly it cleans up. FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
scrubbyj427 Posted September 18, 2020 Author Share #110 Posted September 18, 2020 Thanks Chuck and Rusty. i started a mad sanding storm today and managed to get one coat of WOP on her below the wales, I’ll let it dry overnight and sand again the spots I missed then go over with 400 grit before flipping her over and finishing the top sides, stem and stern post. CaptMorgan, MEDDO, Ryland Craze and 20 others 23 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
John Cheevers Posted September 18, 2020 Share #111 Posted September 18, 2020 it looks fantastic! FrankWouts, Gregory and scrubbyj427 3 John Member: Hampton Roads Ship Model Society Current Builds: Tugboat Dorothy Newport News Shipbuilding Hull #1 (complete) Iron Clad Monitor (complete) Sardine Carrier which I will Name Mary Ann (complete) Pilot Boat John H. Estill Newport News Shipbuilding Hull #12 (my avatar) Harbor tug Susan Moran Coast Guard 100' patrol boat Link to comment Share on other sites More sharing options...
Chuck Posted September 19, 2020 Share #112 Posted September 19, 2020 Really nice. Planking looks great. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
Stuntflyer Posted September 19, 2020 Share #113 Posted September 19, 2020 Nicely done! You definitely have a knack for planking. Mike FrankWouts 1 Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
scrubbyj427 Posted September 20, 2020 Author Share #114 Posted September 20, 2020 Thank you Chuck and Mike I’m happy with how she turned out but I also learned a lot this first go around and will do a few things Differently the next time. Definitely going to take the next step and line off the hull next time. Got her flipped over today and built a stand using the ply from the bulkheads. Did some clean up on the top sides, fitted the figure head and added some poly to the top sides. Wrapping up the loose ends from chapters one and two and looking forward to starting chapter three very much. JJ oneslim, rafine, Matt D and 12 others 15 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
jfhealey Posted September 21, 2020 Share #115 Posted September 21, 2020 That's looking superb JJ! I really admire your restraint leaving the sanding of the hull until all the planking has been done. I found the temptation to neaten things up a bit by sanding as you go irresistible even though it causes difficulties with the lie of adjacent planks. Keep up the good work Fred FrankWouts 1 Link to comment Share on other sites More sharing options...
scrubbyj427 Posted September 21, 2020 Author Share #116 Posted September 21, 2020 Thanks Fred, I actually couldn’t resist in a few places and it caused me some trouble, namely the stern post area, I got them too thin in some areas and I had to actually separate them from the former and space them out a pinch to prevent them from hiding too far behind the stern post. I found the temptation came from the uncertainly of how the planks would look and if they required replacing it would be much easier to do without planks surrounding it. just about wrapped up and ready to start chapter three, but it’s vacation time now! I feel good about my stopping point. JJ Saburo, rafine, Jack H and 11 others 14 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
rafine Posted September 21, 2020 Share #117 Posted September 21, 2020 Beautiful work JJ. Bob FrankWouts 1 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
scrubbyj427 Posted September 21, 2020 Author Share #118 Posted September 21, 2020 Thank you Bob, I’m really enjoying this build. JJ FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Rustyj Posted September 22, 2020 Share #119 Posted September 22, 2020 Very nice! Enjoy your vacation. FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
scrubbyj427 Posted October 11, 2020 Author Share #120 Posted October 11, 2020 Thanks Rusty, as with all vacations it was much too short and I need another one ASAP! So I’m back on the wagon and onto chapter 3, I got the transom placed, the upper counter planked, sanded and a Dry test run on all the windows. So far so good, very happy with the results so far. Hope to get the framing started in the next couple days. The windows required very minor adjustments to fall in line and will require very little manipulation when it comes time to glue them in place. JJ Wacom, Saburo, Ron Burns and 13 others 16 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Recommended Posts