Downloads area for the Winnie Monograph Chapters

[Chuck]

Download the chapters below.  New chapters will be added as I complete the work on the prototype.

 

 Chapterone.pdf- Chapter One

[Chuck]

Here is chapter two!!!   Disregard any typos!!!!!

 

Chaptertwo.pdf

 

Dont hesitate to ask me any questions!!!!

[Chuck]

Here is chapter three!!!   Disregard any typos!!!!!

 

Chapterthree.pdf

 

Dont hesitate to ask me any questions!!!!

[Chuck]

Chapter four is below.  It isnt completely finished as I still have to complete my planking of the gun deck.  But its 98% there.  Since I will chapter four parts ready in a few days I wanted to post it ahead of time.   I will update it as soon as I finish.

 

But happy reading and dont hesitate to ask me any questions.

 

Chapterfour.pdf - Chapter Four

 

Chuck

 

 

[Chuck]

Templates for the cheeks in chapter 5.....chapter 5 coming soon......I hope

 

cheektemplates.pdf

 

 

[Chuck]

Chapter Five....

 

Chapterfive.pdf

[Chuck]

Chapter seven........ PDF plan for beams and knees.   Updated from the large sheets you printed for historical accuracy.

 

Plan for the chain pumps...

 

 

beams and knees.pdf

 

chainpumps.pdf

[Chuck]

Chapter six....Chaptersix.pdf

 

Making gun carriages...

Chapter seven is nearly finished.

[Chuck]

Chapter Seven...

 

Chapterseven.pdf

[Chuck]

Quarter deck beams and planking templates just in case you guys need them for chapter 7.   But they will most likely be used later when we plank the qdeck.  Also the templates for the carlings and ledges on the qdeck.

 

qdeckplanks-beams.pdf

 

qdeckplanksframing.pdf

 

qdeckplankingtemp.pdf

[Chuck]

Forecastle beams template along with planking templates for chapter 8.

 

plankingfcastle.pdf

 

forecastlebeamsledgescarlings.pdf

[Chuck]

Stove instructions.

 

Winnie stove instructions.pdf

[Chuck]

Chapter 8 monograph

Chaptereight.pdf

 

And dont forget your templates which can be found in the posts before this.

 

 

 

 

 

[Thistle17]

I see reference to starting Chapter 10 in Chuck's build. Is Chapter 9 the stove build or do we await it's release?

Joe

[Chuck]

Chapter 9 isnt out yet.  I am working on it....The stove is chapter 8 and is already out.  That has been out for a while.

 

Chuck

[Chuck]

Binnacle friezes....and plan.

 

binnacle.pdf

[Jim Rogers]

Now that Chapter nine parts are available is Chapter Nine PDF release coming soon?

[Chuck]

Nope....i am going to wait a few months.  See if you guys can figure it out.

 

LOL....I just want to make it extra challenging and extra rewarding when you guys finish it all up.

[Chuck]

Here you go Jim....CHAPTER NINE

 

Chapternine.pdf

 

Planking templates are at the end of the chapter.   Be sure to print them out.

[Jim Rogers]

50 minutes ago, Chuck said:

Here you go Jim....CHAPTER NINE

 

Chapternine.pdf 3.47 MB · 3 downloads

 

Planking templates are at the end of the chapter.   Be sure to print them out.

Thank you,thankyou,thank you. 

[glbarlow]

Printed.

[Chuck]

Chapter ten...

Chapterten.pdf

 

binnacle.pdf

[Chuck]

Chapter 11...

 

Chaptereleven.pdf

 

[druxey]

YOU ARE SUPPOSED TO BE ON VACATION, Chuck!

[Chuck]

The family tires me out.   I cant sit at the beach doing nothing for hours.  So today i stayed behind to relax on the deck looking out over the ocean.  While writing of course.  
 

Yesterday I walked 8 miles on a cliff walk  along the mansions of Newport.  Im tired. Plus I have to do

the grilling for when they get back from baking on the beach for hours.  Not fun for me.  Relaxing on deck while sipping a pint is much more relaxing.  
 

Those are a portion of my kids and their pack well ahead of me yesterday with even more of them really far ahead out of camera range.

 

[dvm27]

I remember taking that cliff walk Chuck. Pretty awesome views. I then retired to my yacht and sailed off to Cannes.

 

Chapter Eleven is amazing! Your chain link, molded channel edge and swivel gun solutions are very innovative. A simple solution I found to deal with the entry way step edges is to cut the molding at the appropriate 45 degree angle. The cut off pieces will have the same angle and they are glued to the step to create a perfect molded edge. Easier than filing.

 

Enjoy the rest of your vacation with, and hiding from, your family.

[Oldsalt1950]

Glad you are enjoying your down time. The cliff walk is great. I used to live a block from the "Breakers" in what used to be the carriage house for it. It is a very impressive house. Hope you got to tour it.

[Chuck]

There is no hiding…tonight after some lobster rolls we will all get together for the annual “drunken Bob Ross” night!!  A Traditional family fun get together of any vacation.  All of you should try it.
 

Chuck

[KentM]

So, who’s Bob Ross?

[Matt D]

That sounds like a great trip, Chuck.  I love Newport.  My grandparents met there in 1942, when my grandpa was stationed there in the navy.  They were married in Trinity Church.  I took my family there in 2009.  Did you go to the museum at Navy War College?  It’s got some excellent paintings and at least a few models.  Have fun painting happy clouds!