jimbyr Posted May 5, 2020 Share #1 Posted May 5, 2020 (edited) Everyone Due to manufacturing delays from our suppliers because of the coronavirus, we are unable to take new orders for machines requiring a 120v motor. All orders currently in-house will be shipped within the next two weeks. We do have 230v machines available for our international customers as well as all accessories and blades listed for all the machines. We apologize for this inconvenience. We have been given a schedule for mid- to end-of June for delivery of the 120v motors. If they arrive sooner We'll let you know Stay safe, Donna and Jim Edited May 5, 2020 by jimbyr Bob Cleek, Ryland Craze, coxswain and 2 others 5 Link to comment Share on other sites More sharing options...
BobG Posted May 5, 2020 Share #2 Posted May 5, 2020 I'm sorry to hear that your business is being adversely affect by the pandemic. I was just about to pull the trigger on a table saw and maybe even the belt sander and thickness sander. Hopefully, your 120V motors will arrive sooner than later. VTHokiEE, mtaylor and Nirvana 3 Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
mtaylor Posted May 5, 2020 Share #3 Posted May 5, 2020 I'm sorry to hear that, Jim. Nirvana 1 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
YankeeD Posted May 5, 2020 Share #4 Posted May 5, 2020 Hi Jim, is there also an email problem? I put in an order for some accessories couple of weeks ago and also a reminder. No reply sofar. Could you lookinto it please? Thanks Hans. Nirvana and mtaylor 2 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
jimbyr Posted May 5, 2020 Author Share #5 Posted May 5, 2020 Hans Do you have an order # Jim mtaylor and Nirvana 2 Link to comment Share on other sites More sharing options...
YankeeD Posted May 5, 2020 Share #6 Posted May 5, 2020 Thanks Jim, order #200419MM38900158 And I asked by mail (remove by moderator) to add 1 extra adapter and to add 2 miter bars for the saw miter slots. Thanks for looking into it. Hans mtaylor, jimbyr and Nirvana 3 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
jimbyr Posted May 5, 2020 Author Share #7 Posted May 5, 2020 Hans Donna said she emailed you this morning Jim mtaylor and Nirvana 2 Link to comment Share on other sites More sharing options...
YankeeD Posted May 5, 2020 Share #8 Posted May 5, 2020 Indeed she did Jim, just came in my time 19.52, crossed in between my 2 posts here. Thanks anyway. Will follow up with her, thanks! mtaylor and Nirvana 2 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
Retired guy Posted May 31, 2020 Share #9 Posted May 31, 2020 Hi Jim, I sent an email to you last week just wondering if you got it Regards Richard Nirvana 1 Current build: Bluenose by Retired guy - Model Shipways - scale 1:64 Link to comment Share on other sites More sharing options...
jimbyr Posted June 4, 2020 Author Share #10 Posted June 4, 2020 Richard Didn't see it, send it to jdm@cfl.rr.com Jim mtaylor, Nirvana and Retired guy 3 Link to comment Share on other sites More sharing options...
Retired guy Posted June 6, 2020 Share #11 Posted June 6, 2020 Thanks Jim will do Regards Richard mtaylor and Nirvana 2 Current build: Bluenose by Retired guy - Model Shipways - scale 1:64 Link to comment Share on other sites More sharing options...
YankeeD Posted June 9, 2020 Share #12 Posted June 9, 2020 Jim as you provide a larger table top for the table saw is there a likewise option for the disc sander? I would be very much interested in a 250mm disc sized discsander Rgds Hans mtaylor and Nirvana 2 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
jimbyr Posted June 10, 2020 Author Share #13 Posted June 10, 2020 Hans To do that it would be a whole new machine. Aren't there a few good 10' diameter sanders on the market Jim. mtaylor and Nirvana 2 Link to comment Share on other sites More sharing options...
YankeeD Posted June 10, 2020 Share #14 Posted June 10, 2020 OK clear, thanks Jim. There are some on the market, but not as good as yours. I currently have the proxxon. its ok but as their table saw compares against your table saw, just a step down on the ladder. Rgds Hans Landlubber Mike, mtaylor and Nirvana 3 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
YankeeD Posted June 17, 2020 Share #15 Posted June 17, 2020 On 6/10/2020 at 4:46 PM, jimbyr said: Hans To do that it would be a whole new machine. Aren't there a few good 10' diameter sanders on the market Jim. Jim, What about a special consignment job to build me one? Not being able to build and ship 120V motor units could maybe leave you some spare hours :)? RGDS Hans. mtaylor and Nirvana 2 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
jimbyr Posted July 13, 2020 Author Share #16 Posted July 13, 2020 Finally motors are in. The website should be open tonight for orders. We will get the machines out as quickly as possible. We appreciate your patience. go easy on us regards Jim mtaylor, druxey, Mark P and 14 others 17 Link to comment Share on other sites More sharing options...
Nirvana Posted July 13, 2020 Share #17 Posted July 13, 2020 Jim, Did you just receive 800 units of 120volt motors? mtaylor 1 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
jimbyr Posted July 13, 2020 Author Share #18 Posted July 13, 2020 Per Yes we did Jim Canute, BobG, Nirvana and 2 others 5 Link to comment Share on other sites More sharing options...
jimbyr Posted July 13, 2020 Author Share #19 Posted July 13, 2020 We order anywhere from 600-1000 at a time Jim mtaylor, Canute and Ryland Craze 3 Link to comment Share on other sites More sharing options...
RichardG Posted July 14, 2020 Share #20 Posted July 14, 2020 Wow. That's a lot. Now I have to get back to my wife and explain why I need a new power saw 😀. mtaylor, Canute and druxey 3 Richard Current Build: Early 19th Century US Revenue Cutter (Artesania Latina "Dallas" - messed about) Completed Build: Yakatabune - Japanese - Woody Joe mini Member: Nautical Research Guild & Midwest Model Shipwrights Link to comment Share on other sites More sharing options...
BobG Posted July 14, 2020 Share #21 Posted July 14, 2020 1 hour ago, jimbyr said: We order anywhere from 600-1000 at a time Jim Sounds like business is good!! Bob Cleek, Canute, mtaylor and 1 other 4 Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Thistle17 Posted July 14, 2020 Share #22 Posted July 14, 2020 This era we are living in has taken so much "wind out of the sails" (or sales if you prefer) of every manufacturer or parts supplier, no matter the arnea. I have found this in building supplies, home freezers, PPE and even elective surgery. The backlog of work laid on our normally responsive suppluiers I am learning is staggering. We all have to temper our expectations of availability. I have had to relearn that with Model Machines lately that it is not all about me! Be kind. Joe Ryland Craze, Canute, mtaylor and 4 others 7 Link to comment Share on other sites More sharing options...
Wahka_est Posted July 14, 2020 Share #23 Posted July 14, 2020 Hi Do you have a distributor in EU also? Vahur Canute 1 Link to comment Share on other sites More sharing options...
Nirvana Posted July 14, 2020 Share #24 Posted July 14, 2020 1 hour ago, Wahka_est said: Hi Do you have a distributor in EU also? Vahur Vahur, Byrnes Machines are selling directly to user - in the long run cheaper for you at the end. It may take longer time to get the machines. When you buy from them you will have 100% support. Ryland Craze, Kusawa2000, Canute and 3 others 6 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
jimbyr Posted July 25, 2020 Author Share #25 Posted July 25, 2020 Since we opened up the website for 120V machines we have been swamped with orders. Today I put together 24 saws and that's not all we are shipping this coming week. So...please be patient. We'll get them out as soon as possible thanks Jim GuntherMT, Bob Cleek, Duanelaker and 7 others 10 Link to comment Share on other sites More sharing options...
YankeeD Posted August 10, 2020 Share #26 Posted August 10, 2020 Hi Jim, hows the work going? I put an order in week and half ago. Any indication as when it could be shipped? Thanks for having Donna take a look. Just so I know whats the wait. Thanks Hans. mtaylor and Canute 2 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
YankeeD Posted August 24, 2020 Share #27 Posted August 24, 2020 Hi Jim, any luck of getting some time to look at my order? Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
jimbyr Posted August 24, 2020 Author Share #28 Posted August 24, 2020 hans What's your order # Jim Link to comment Share on other sites More sharing options...
YankeeD Posted August 24, 2020 Share #29 Posted August 24, 2020 Hi Jim, As follows: "Thanks for your on-line order #200730MM24768001 at ByrnesModelMachines.com!" Regards and thanks Hans. ps also send an email to Donna after the order as for details/instructions on shipping. Canute 1 Current build 7 Provinciën (Englisch thread): http://modelshipworld.com/index.php/topic/13719-the-7-provinci%C3%ABn-by-yankeed-scale-150-1665-according-to-drawings-by-mr-o-blom-first-wooden-scratch-ship-build/ For Dutch readers (Dutch thread): http://www.modelbouwforum.nl/threads/nederlands-historisch-zeilschip-het-schip-van-de-ruyter-de-7-provinci%C3%ABn.216834/ Link to comment Share on other sites More sharing options...
jimbyr Posted August 24, 2020 Author Share #30 Posted August 24, 2020 Hans, Donna just did a search and found where she issued a quote for the sliding table on 7 August w/options to pay. She will forward this e-mail. Canute and mtaylor 2 Link to comment Share on other sites More sharing options...
Recommended Posts