Schrader Posted October 13, 2020 Author #121 Posted October 13, 2020 The SHIP IS FINISHED!!!! The yards are done....: The diorama is on its way tarbrush, PietFriet, Brinkman and 13 others 16 Quote
Danstream Posted October 13, 2020 #122 Posted October 13, 2020 Amazing build! Very interesting, captivating, well researched and absolutely unique. I learnt a lot about these Egyptian vessels. On top, your outstanding workmanship made your build a pleasure to follow. Congratulations and now the difficult question is: what's next? Best regards, Dan. Schrader 1 Quote Current build : Mayflower - AL 1:64, Lady Nelson - Amati Victory 1:64 Completed non-ship builds : Spitfire MK I - 1:48, Arado 196B - 1:32, Sea Fury - 1:48, F-15C Eagle - 1:48, Hawker Tempest Mk.V - 1:48, F104S Starfighter - 1:48 "The most effective way to do it, is to do it" - Amelia Earhart
Louie da fly Posted October 14, 2020 #123 Posted October 14, 2020 Congratulations, Hellmuht! You've done a beautiful job of this model; a combination of thorough research, inspired guesswork when the information wasn't available, and superb craftsmanship. Schrader and tarbrush 1 1 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
Schrader Posted October 14, 2020 Author #124 Posted October 14, 2020 Thanks a lot to you all. Your comments an your likes always motivate me to start and most important “to finish”. I’ve seen a lot of unfinished projects in different scenarios, which is really sad. with all this positive comments you all make me blush. Next I have several alternatives but looking for 1. finally to have “my viking” where with the help of this forum, there are enough research and documentation. 2. a Quanzhou Ship. Which is a first century Chinese Junk. Where there is not that much information (pretty less that the Egyptian one) BUT FIRST.... finishing the “diorama” where the idea is not to build a very complex one but a real Egyptian surroundings. again. Thanks a lot!! druxey, Ekis, Louie da fly and 2 others 5 Quote
Schrader Posted October 19, 2020 Author #125 Posted October 19, 2020 Hello all...... I already brought the diorama Base...... The idea is to build a dry dock “simulation...... and in the back side I’ll build a “wall” simulating the Sahure King tomb (. Let’s remember that the “Byblos ship pictures were found in his tomb)..... Well...... I went to the “odonthology” method.... and using the PLASTER CASTING material I created the “wall”..... but first I took the drawing from Landstrom book, imported to Autocad and created a full picture with 25 cm long.... Then I put it over the “wall” and with carbon paper I reproduced the image over it..... Created the “stones”..... And started to carving all these “details”..... It is going to be a long way before it is finished.... wefalck, J11, mtaylor and 12 others 15 Quote
Louie da fly Posted October 19, 2020 #126 Posted October 19, 2020 Oh, wow . . . Schrader, mtaylor and J11 2 1 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
BANYAN Posted October 19, 2020 #127 Posted October 19, 2020 That will be spectacular cheers Pat Schrader and mtaylor 1 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
druxey Posted October 19, 2020 #128 Posted October 19, 2020 A great start! mtaylor and Schrader 1 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Schrader Posted October 20, 2020 Author #129 Posted October 20, 2020 Avanzando mtaylor, Brinkman, J11 and 5 others 8 Quote
Schrader Posted October 20, 2020 Author #130 Posted October 20, 2020 That means KEEP GOING... sorry mtaylor 1 Quote
Schrader Posted October 21, 2020 Author #131 Posted October 21, 2020 I’m so happy!!! I liked oneslim, Landrotten Highlander, Waitoa and 12 others 14 1 Quote
bigpetr Posted October 21, 2020 #132 Posted October 21, 2020 WOW. Magnificent stand. Not overdone, doesnt compete with the ship. Beautiful. mtaylor and Schrader 1 1 Quote
BobG Posted October 22, 2020 #133 Posted October 22, 2020 Fantastic model of a very unusual boat! Congratulations on another outstanding model. mtaylor and Schrader 1 1 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
Schrader Posted October 31, 2020 Author #134 Posted October 31, 2020 (edited) For the “first” floor I decided to go after a Egyptian shipyard....... this suppose to be the “original” It was not found in the Sahure tomb. It was found in a Tomb named “The Mastaba of Ty”. Also from the fifth dynasty. I took the first picture imported it to Autocad scaled it and....boom.... With a carbon paper I copied it in the wall..... And started the carving process..... Once I finished (one week later..., or at least I thought I finished.... this is the result Then the ocre washing process.... Final result!!!! Good so far Edited October 31, 2020 by Schrader BANYAN, Rik Thistle, KeithAug and 9 others 12 Quote
wefalck Posted October 31, 2020 #135 Posted October 31, 2020 Very egyptian ! mtaylor and Schrader 1 1 Quote wefalck panta rhei - Everything is in flux
BANYAN Posted October 31, 2020 #136 Posted October 31, 2020 (edited) That is a great backdrop for your model, very much in theme for telling the full story. cheers Pat Edited October 31, 2020 by BANYAN Schrader and mtaylor 1 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
bolin Posted November 4, 2020 #137 Posted November 4, 2020 Very nice idea and a good backdrop for your model. mtaylor and Schrader 1 1 Quote Current builds Meta - Billing Boats - Pentikontoros - Navarino Completed builds Swampscott Dory - BlueJacket - Will Everard - Billing Boats - Bohuseka (Swedish west-coast rowboat) - scratch build - Medieval long-ship Helga Holm - scratch build - Sloop from Roslagen - scratch build
Schrader Posted November 9, 2020 Author #138 Posted November 9, 2020 (edited) Here I am again....... I just decided to add a couple of columns...... In the left one, I’ll go with King Sahure and his wife Meretnebery And in the right one will have god RA (sun god) and god Anubis (tomb guardian)..... Let’s see a little bit of the process.... Now let’s put them together and let’s see how is going to be in our base.... Edited November 9, 2020 by Schrader GrandpaPhil and Landrotten Highlander 2 Quote
Schrader Posted November 9, 2020 Author #139 Posted November 9, 2020 Starting the carving...... And.... let see the final result with the capital included...... I could not hold the temptation to see it beside the ship.... Landrotten Highlander, wefalck, bigpetr and 16 others 19 Quote
BANYAN Posted November 9, 2020 #140 Posted November 9, 2020 That has to be the best backdrop I have ever seen - well presented and executed. cheers Pat Schrader and mtaylor 1 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
mtaylor Posted November 9, 2020 #141 Posted November 9, 2020 That is one amazing backdrop. Not only is it well done, it complements the model without overpowering it. Schrader 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
KeithAug Posted November 17, 2020 #142 Posted November 17, 2020 A lovely way to finish this build, it is a pleasure to follow along. Schrader and mtaylor 1 1 Quote Keith Current Build:- Cangarda (Steam Yacht) - Scale 1:24 Previous Builds:- Schooner Germania (Nova) - Scale 1:36 https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/ Schooner Altair by KeithAug - Scale 1:32 - 1931 http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702 J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration. http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029 Other Topics Nautical Adventures http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846
Schrader Posted November 19, 2020 Author #143 Posted November 19, 2020 Here we are again.....progress in the base..... First I made a stone simulation/distribution in the MDF Second I applied the stone-cast on top of it, making sure that the stones joints needed to be marked I installed the wood beams.... Third.... I brought the stone wall and the ship to see how the set is looking..... in the showcase Then. We need to age the stones and start installing the sand..... WE ARE REALLY CLOSE !!!!!! J11, bigpetr, Landrotten Highlander and 5 others 8 Quote
wefalck Posted November 19, 2020 #144 Posted November 19, 2020 Looks excellent ! How did you score the stones in the MDF, with a router ? mtaylor and Schrader 1 1 Quote wefalck panta rhei - Everything is in flux
VTHokiEE Posted November 19, 2020 #145 Posted November 19, 2020 Awesome build and a stunning display - congratulations! Schrader and mtaylor 1 1 Quote Current Build: HM Sloop Echo 1781 (First Scratch Build) Previous Builds: HM Cutter Alert, Sharpie Schooner, Chesapeake Bay Flattie, Half-Hull (NRG)
Schrader Posted November 19, 2020 Author #146 Posted November 19, 2020 5 minutes ago, wefalck said: Looks excellent ! How did you score the stones in the MDF, with a router ? Nop. I tried but it was hard to “stop” the cut un the cross. I did it with scalpel and..... a lot of patience mtaylor 1 Quote
Louie da fly Posted November 20, 2020 #147 Posted November 20, 2020 Brilliant work, Schrader! What a wonderful setting for the ship! mtaylor and Schrader 1 1 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
BANYAN Posted November 20, 2020 #148 Posted November 20, 2020 You have a very nice collection of builds there Schrader, and this little beauty will just enhance it further. cheers Pat Schrader and mtaylor 1 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Schrader Posted November 21, 2020 Author #149 Posted November 21, 2020 FINISHED!!! I’ll share more photos as soon a I have it in the showcase GrandpaPhil, bigpetr, Landrotten Highlander and 7 others 10 Quote
mtaylor Posted November 22, 2020 #150 Posted November 22, 2020 I thought the ship itself was beautiful but your display takes things to a lot higher level. Spectacular. Ekis and Schrader 1 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.