Jump to content

Recommended Posts

Posted

A couple of weekends ago, had the pleasure of attending a scale model swap meet at a local hobby shop. Modelers from all over the state brought dozens of models for sale or trade. I ended up buying quite a few model car and truck kits including this one, the 1:25 Moebius 1955 Chrysler 300. 

 

IMG_1909.thumb.jpg.ae56ff8e71512fa3323999d9463b5155.jpg

 

In 1955, this Chrysler was equipped with a 330 cubic inch Hemi V-8 engine with a factory installed dual four barrel carb intake manifold. While it was a heavy car, the powerplant made it quite a good performer and it was sought after by drivers on the big race track circuit.

I've decided to add extra scratch built details to this build and have started by doing my own custom made fan belt, power steering, and water pump pulley's. Also, the fan belts are custom made along with a scratch made bracket for the power steering pump. The engine colors are stock. Have not decided yet on the interior/exterior colors I will use. Will be working this one slowly and will not be in a rush to finish it.

Moebius packs a lot of detail into their scale model car and truck kits.

 

IMG_1875.thumb.jpg.29f4413934b16aefab16bf49c72c607e.jpgIMG_1876.thumb.jpg.f0b007d56b935a00aba8ed39d0548061.jpgIMG_1877.thumb.jpg.c50a698917570f98d6ae3fc59e620315.jpgIMG_1878.thumb.jpg.b6d0632b7d25f4d48a3b9f009c27111c.jpgIMG_1879.thumb.jpg.efc9c70a6ae543164e01c44aba0a94a4.jpg

 

Posted (edited)

Nice start. That gold accent really yells 50s at you! :D

That engine and tranny probably weighed half as much as a full modern car!:P

Edited by lmagna

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted
11 minutes ago, lmagna said:

Nice start. That gold accent really yells 50s at you! :D

That engine and tranny probably weighed half as much as a full modern car!:P

They were very heavy engines for sure. Like the Caddy's and Lincoln's.

Used to be, the route to a real fast, cheap to build drag car, was to drop a used Caddy engine and tranny into a Chevy Vega. There were hot rod Lincoln's, too. But I don't ever recall seeing one of these '55 Chrysler 300's. Don't think there were too many of them sold, probably kinda expensive. I read they didn't come with air conditioning as an option in '55, and that would hurt sales potential in southern states competing with Lincoln's and Caddy's which did offer AC.

Posted
On 3/11/2021 at 6:00 PM, CDW said:

Have not decided yet on the interior/exterior colors I will use. Will be working this one slowly and will not be in a rush to finish it.

Moebius packs a lot of detail into their scale model car and truck kits.

WoW! Where did I miss this?

 

Sorry bout being late to the party, the world is slowing me down a bit right now....

 

I'm in.... (thinkin' on hoisting my self up to the rafters)

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Posted
1 minute ago, Egilman said:

WoW! Where did I miss this?

 

Sorry bout being late to the party, the world is slowing me down a bit right now....

 

I'm in.... (thinkin' on hoisting my self up to the rafters)

"Got any popcorn  brother"

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Posted
7 minutes ago, Old Collingwood said:

"Got any popcorn  brother"

 

OC.

I thought mark was in charge of the popcorn?

 

Well since I'm the last man in I suppose I could run down the the dollar store and pick up some extra buttery..... About 50 bags should suffice?

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Posted
4 minutes ago, Egilman said:

I thought mark was in charge of the popcorn?

 

Well since I'm the last man in I suppose I could run down the the dollar store and pick up some extra buttery..... About 50 bags should suffice?

Sounds good to me.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

  • 3 weeks later...
Posted

guess I'm not 'too late' for the party  ;)    nice start!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted
18 minutes ago, popeye the sailor said:

guess I'm not 'too late' for the party  ;)    nice start!

 

The only thing I've done with it so far is in the photos except for the work I've been doing to cut open the doors and trunk lid. I'll be scratch building hinges and door jambs later on. Will provide some new photos soon. Thanks for dropping by.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...