Solution Jeronimo Posted June 17, 2021 Solution #1 Posted June 17, 2021 Section of a 36pdr. Cannon on the first gun deck of a 74 gunship in1/12 scale. Due to the center distance of 150 mm of my small Proxxon FD150/E, I had to manufacture the cannon in two parts. Karl BenD, catopower, Beef Wellington and 12 others 15 Quote
bruce d Posted June 17, 2021 #2 Posted June 17, 2021 Very nice, Karl. The finish is perfect, may I ask what is the wood? Jeronimo, mtaylor, thibaultron and 2 others 5 Quote 🌻 STAY SAFE A model shipwright and an amateur historian are heads & tails of the same coin current builds: HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style Mediator sloop, 1/48 - an 18th century transport scratchbuild French longboat - CAF - 1/48, on hold
Jeronimo Posted June 17, 2021 Author #3 Posted June 17, 2021 3 hours ago, bruce d said: Very nice, Karl. The finish is perfect, may I ask what is the wood? Hi Bruce, the Cannon: Boxwood, Finish: Metallic Spray. Karl mtaylor, allanyed, catopower and 4 others 5 2 Quote
Jeronimo Posted June 20, 2021 Author #4 Posted June 20, 2021 Thank you for the kind comments and likes. Part 2 Construction of the gun carriage. Karl catopower, mtaylor, wefalck and 7 others 10 Quote
Jeronimo Posted June 20, 2021 Author #5 Posted June 20, 2021 Part 3 Installation of the gun barrel. Karl catopower, BenD, Roger Pellett and 16 others 13 1 5 Quote
Jeronimo Posted July 1, 2021 Author #6 Posted July 1, 2021 Thanks to all for the kind comments. Part 4 Auxiliary construction built for the alignment of the frames, five double frames installed, gun opening fixed. To consolidate the construction , the entire external planking was atteched. Karl (Google Translator) Wacom, mtaylor, GrandpaPhil and 7 others 9 1 Quote
allanyed Posted July 1, 2021 #7 Posted July 1, 2021 I really love this project. Very nice change to large scale yet manageable end result size wise. Allan bruce d, thibaultron, Jeronimo and 2 others 5 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
Wacom Posted July 2, 2021 #8 Posted July 2, 2021 On 6/20/2021 at 2:44 PM, Jeronimo said: Part 3 Installation of the gun barrel. Karl Suburb work👍 mtaylor, thibaultron and Jeronimo 3 Quote Reg
Freezing Parrot Posted July 2, 2021 #9 Posted July 2, 2021 Sehr gut! thibaultron, mtaylor and Jeronimo 3 Quote Mike currently SE of Disorder Current Build: HM Cutter Lady Nelson - Amati Previous Build: Swift 1805 - Artesania Latina
Roger Pellett Posted July 2, 2021 #10 Posted July 2, 2021 Your cannon looks like the real thing! Jeronimo, Freezing Parrot, mtaylor and 2 others 5 Quote
pollex Posted July 2, 2021 #11 Posted July 2, 2021 Are you using the J.Boudriot books or plans as the source of your data. ? I also have Boudriot"s books (4 volumes); also several other Ancre Monograms. They are EXCELLENT ! Pollex, Calgary mtaylor, thibaultron and Jeronimo 3 Quote
Jeronimo Posted July 3, 2021 Author #12 Posted July 3, 2021 1 hour ago, pollex said: Are you using the J.Boudriot books or plans as the source of your data. ? I also have Boudriot"s books (4 volumes); also several other Ancre Monograms. They are EXCELLENT ! Pollex, Calgary Yes, " Le Vaisseau de 74 cannon" , Jean Boudriot. Karl mtaylor, bruce d, lmagna and 1 other 4 Quote
Jeronimo Posted July 4, 2021 Author #13 Posted July 4, 2021 Thanks to everyone for the kind comments and likes. Small update Fuse split replaced by a fuse wedge, as per drawing. Karl mtaylor, bruce d, rlb and 6 others 9 Quote
Jeronimo Posted July 25, 2021 Author #14 Posted July 25, 2021 Thanks to everyone. Part 6 Balkweger, Deck beams, Verbindungsknie, knees, fitted these are dismantled again for further interior work. Karl (Google Translator) JohnB40, Beef Wellington, bruce d and 8 others 11 Quote
Jeronimo Posted August 5, 2021 Author #15 Posted August 5, 2021 Update Part 7 bruce d, druxey, JohnB40 and 7 others 9 1 Quote
druxey Posted August 5, 2021 #16 Posted August 5, 2021 Lovely clean work! mtaylor and Jeronimo 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
bruce d Posted August 5, 2021 #17 Posted August 5, 2021 Wonderful! Jeronimo and mtaylor 2 Quote 🌻 STAY SAFE A model shipwright and an amateur historian are heads & tails of the same coin current builds: HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style Mediator sloop, 1/48 - an 18th century transport scratchbuild French longboat - CAF - 1/48, on hold
Jeronimo Posted August 5, 2021 Author #18 Posted August 5, 2021 Update Brooktau, Troot brail, Breech rope shortened. Karl JpR62, Dziadeczek, druxey and 5 others 8 Quote
Dziadeczek Posted August 5, 2021 #19 Posted August 5, 2021 Out of this world! May I ask you, how did you carve (?) this lettering "DE 36"? Thomas lmagna, mtaylor and Jeronimo 3 Quote
Jeronimo Posted August 6, 2021 Author #20 Posted August 6, 2021 22 hours ago, Dziadeczek said: Out of this world! May I ask you, how did you carve (?) this lettering "DE 36"? Thomas Hallo Thomas. Ich kann momentan nur auf Deutsch antworten. Schrift auf die Lafette übertragen, Konturen der Schrift mit einer feinen Nadel nachgestochen. Fertig. Grüsse Karl Translation from Moderator: Hello Thomas. I can only answer in German at the moment. Transfer the writing to the mount, engraving the outlines of the writing with a fine needle. Finished. Greetings bruce d, BenD, mtaylor and 3 others 6 Quote
Dziadeczek Posted August 7, 2021 #21 Posted August 7, 2021 Thank you, Moderator. Jeronimo and mtaylor 2 Quote
Jeronimo Posted August 8, 2021 Author #22 Posted August 8, 2021 4 hours ago, Dziadeczek said: Vielen Dank, Moderator. Many thanks to the moderator. Karl mtaylor 1 Quote
Jeronimo Posted August 8, 2021 Author #23 Posted August 8, 2021 Danke an alle für die freundlichen Kommentare und Likes. Small Update. Part 8 To save weight, I used plastic cannonballs. Karl BenD, marktiedens, bruce d and 5 others 7 1 Quote
Jeronimo Posted August 28, 2021 Author #24 Posted August 28, 2021 Thanks to everyone for the kind comments and likes. Update: Part 9 Production and assembly of the blocks on the cannon. I would have had to work on the hooks a bit, grind the tip etc. I just forgot, now it's like that. Karl maurino, tlevine, marktiedens and 6 others 6 3 Quote
allanyed Posted August 28, 2021 #25 Posted August 28, 2021 Stunning workmanship and very nice photography. Allan mtaylor, BenD, Jeronimo and 1 other 4 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
BenD Posted August 28, 2021 #26 Posted August 28, 2021 Simply perfection. bruce d, Jeronimo and mtaylor 3 Quote Ropes of Scale.com - Rope and cable for the scale modeler. Finished builds: HM Cutter Sherbourne - Caldercraft - 1:64 - 9th century longship - Falkonet - 1:72 Current builds: HMS Snake - Caldercraft - 1:64 - Tender Avos by BenD - Master Korabel - 1:72 - 19th Century Four-Oared Yawl by BenD - Falkonet - 1:24 scale
Jeronimo Posted August 31, 2021 Author #27 Posted August 31, 2021 Thanks to everyone for the kind comments and likes. Update Change of ropes, with the correct direction of impact according to Boudriot's drawing. Karl dvm27, bruce d, maurino and 5 others 7 1 Quote
Jeronimo Posted September 1, 2021 Author #28 Posted September 1, 2021 Change of the "Brooktau" is pending. Gerard Delacroix makes me aware. Merci Gerard. Karl mtaylor, bruce d, Bedford and 1 other 4 Quote
Jeronimo Posted September 2, 2021 Author #29 Posted September 2, 2021 Brooktau / Change Karl mtaylor, dvm27, scrubbyj427 and 3 others 5 1 Quote
G. Delacroix Posted September 2, 2021 #30 Posted September 2, 2021 Now it's perfect 👍 bruce d, Jeronimo, dvm27 and 1 other 4 Quote ___________________ Marine et modélisme d'arsenal Website
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.