Jump to content

Recommended Posts

Posted

Afternoon all,

 

Joined recently after an email conversation with the very talented Chuck. My name is Simon and I'm the prototypical middle aged chap in north east Scotland. I'm my wife's carer and I'm hoping model boats can be a relaxation when time is available. I have a mild brain injury so while I'm not too bad with the doing but I'm not great with the remembering of lots of names for new things, apologies in advance. I used to do a reasonable amount of woodwork with just hand tools but arthritis put a stop to that. Smaller tools seem, so far, to be kinder.

I'm nearly finished my first kit, the Occre Polaris starter kit, and I'll get some pics next time it's out. It's taken me about five weeks to get to standing rigging and I'm quite pleased with how I've got on. There are plenty of errors but most I've found my way round or been able to repair. Having taken a lot of time looking at the various manufacturers and folk's results here I now have two Vanguard kits in the stash to work on. It seemed they are expensive compared to most but the quality and level of detail as standard makes them great value for money in comparison. Hopefully I'm realistic though and will do one or more of the fishing boats before progressing to any of the fighting boats. Personally I'd rather not model the fighting ships but as Vanguard kits seem so good I'd rather attempt them than not.

 

Look forward to speaking with you all and hope to do a build log for the next kit.

 

Simon

Simon.

 

Current builds 

 

  • HMS Speedy v2023 - Vanguard Models
  • Nisha - Vanguard Models
  • HM Gun Brig Adder - Vanguard Models

 

Previous

 

 

Posted

Simon, Welcome to MSW from Sussex. 

🌻

STAY SAFE

 

A model shipwright and an amateur historian are heads & tails of the same coin

current builds:

HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style

Mediator sloop, 1/48 - an 18th century transport scratchbuild 

French longboat - CAF - 1/48, on hold

Posted
16 minutes ago, BrochBoating said:

Personally I'd rather not model the fighting ships

I favor hull form and a ship's ectoderm.  I see the artillery as being an unnecessary distraction and see no compelling reason to include it.

 

 

NRG member 50 years

 

Current:  

NMS

HMS Ajax 1767 - 74-gun 3rd rate - 1:192 POF exploration - works but too intense -no margin for error

HMS Centurion 1732 - 60-gun 4th rate - POF Navall Timber framing

HMS Beagle 1831 refiit  10-gun brig with a small mizzen - POF Navall (ish) Timber framing

The U.S. Ex. Ex. 1838-1842
Flying Fish 1838  pilot schooner - POF framed - ready for stern timbers
Porpose II  1836  brigantine/brig - POF framed - ready for hawse and stern timbers
Vincennes  1825  Sloop-of-War  - POF timbers assembled, need shaping
Peacock  1828  Sloop-of -War  - POF timbers ready for assembly
Sea Gull  1838  pilot schooner - POF timbers ready for assembly
Relief  1835 packet hull USN ship - POF timbers ready for assembly

Other

Portsmouth  1843  Sloop-of-War  - POF timbers ready for assembly
Le Commerce de Marseilles  1788   118 cannons - POF framed

La Renommee 1744 Frigate - POF framed - ready for hawse and stern timbers

 

Posted
33 minutes ago, Jaager said:

I favor hull form and a ship's ectoderm.  I see the artillery as being an unnecessary distraction and see no compelling reason to include it.

 

 

 

It would be good if there were more really good quality kits of the exploration & industrial/commerce ships.

Simon.

 

Current builds 

 

  • HMS Speedy v2023 - Vanguard Models
  • Nisha - Vanguard Models
  • HM Gun Brig Adder - Vanguard Models

 

Previous

 

 

Posted

:sign:

Nice looking ship.

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Posted
3 minutes ago, Knocklouder said:

:sign:

Nice looking ship.

 

Thanks. Lots of errors but happy for a first go. Will be happier after I've got some proper applicators for liquid CA!

 

Simon.

 

Current builds 

 

  • HMS Speedy v2023 - Vanguard Models
  • Nisha - Vanguard Models
  • HM Gun Brig Adder - Vanguard Models

 

Previous

 

 

Posted
1 hour ago, BrochBoating said:

Personally I'd rather not model the fighting ships but as Vanguard kits seem so good I'd rather attempt them than not.

 

Look forward to speaking with you all and hope to do a build log for the next kit.

 

Simon

Welcome to MSW Simon :cheers: as for Vanguard kits they are worth it and has a good fleet of fishing Vessels if you don't want cannons festooning your models!  Hope you do a build log of them.

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Posted
3 minutes ago, AJohnson said:

Welcome to MSW Simon :cheers: as for Vanguard kits they are worth it and has a good fleet of fishing Vessels if you don't want cannons festooning your models!  Hope you do a build log of them.

 

Cheers. I have the Saucy Jack to start next. The Mumble Bee is similar to boats my late father's family had. The Zulu was built two miles from me and the Fifie fished from my village!

Simon.

 

Current builds 

 

  • HMS Speedy v2023 - Vanguard Models
  • Nisha - Vanguard Models
  • HM Gun Brig Adder - Vanguard Models

 

Previous

 

 

Posted
6 minutes ago, mugje said:

Welcome! And love your first build, it looks great :)

 

 

Thanks :) Particularly enjoyed the planking. And the work to improve it after lol!

 

Simon.

 

Current builds 

 

  • HMS Speedy v2023 - Vanguard Models
  • Nisha - Vanguard Models
  • HM Gun Brig Adder - Vanguard Models

 

Previous

 

 

Posted

:sign:

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

Simon, welcome to MSW. Glad to have you aboard. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted
1 minute ago, Vlax said:

Welcome! That’s a fine ship you have there. Great work and I hope you enjoy your new hobby. 

 

Thanks a lot. For a first go I'm pleased.

 

Simon.

 

Current builds 

 

  • HMS Speedy v2023 - Vanguard Models
  • Nisha - Vanguard Models
  • HM Gun Brig Adder - Vanguard Models

 

Previous

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...