Le Chebec by Yvesvidal - CAF Model - 1/48

[yvesvidal]

After completing with success the large 1/48 HMS Bellona by CAF Model, here is another ship that I always wanted to build: Le Chebec (one of the series, being called Le Requin). These eight (8) ships built by a French shipyard, were patrolling the Mediterranean sea and were used for all kinds of purposes. I love the sleek, flat, large and elegant shape of these ships and the combination of sails and oars, allowing them to move even when the wind was null, which happens quite often in the Mediterranean basin.

 

There are multiple kits of that ship in the scale of 1/48 or 1/50th. The plastic model from Heller is a classic and still calls for a hefty price, due to its large size and complexity. The artist commissioned by Heller, also painted what I consider to be one of the most beautiful rendition of that legendary vessel:

 

 

However, I wanted to build something made of wood and after building the Bellona using the plank on bulkheads technique, the desire to build a true "Plank on Frames" hit me. This technique allows for the display of the inside of the ship, which is always an exciting feature.

 

A few Chinese builders are offering the Chebec in 1/48th scale, but having had a great experience with CAF Model, I decided to go with them as they just authored this new kit, recently. Besides, the other Chinese makes of this kit are not authorized on that forum. So, it was a big NO-NO!

 

Procuring the kit was an adventure of patience, renouncement, frustration and finally relief. At the end of the story, I could appreciate and treasure the honesty and incredible dedication of "Tom" from CAF Model. After paying the price of the kit and ordering on the CAF Model web site, Tom sent the kit using UPS and one local "Courier Agency" in China. Tracking on the UPS web site was encouraging until.....I realized that the kit had been delivered to a small town south of Dallas, TX. Bummer! Tom checked the route and realized that the Courier Agency had screwed up and sent the kit to the wrong address. Despite all queries with UPS and the Agency, the kit was never located and the recipient of the kit never tried to contact me or Tom, for the mistake (my name and phone number were on the parcel).

 

Tom initiated a second sending of a second kit (big losses for Tom - I hope that the insurance will refund some of that money) and gave me a second UPS tracking number. The second kit stayed 10 days in the American Custom department, not moving apparently as UPS was not getting the parcel. I lost it and asked Tom again, what was going on. Tom, feeling my frustration refunded me completely for all the money I had given him. He also indicated that he had used another Courier Company and was placing better expectations on them. A quick mail from him, indicated that the kit was now on US ground. Time passed..... And just today, the kit finally showed up at my door: a MIRACLE !!!! Of course, I am waiting for Tom's bill and I will pay him with gratitude and satisfaction. I am not sure what is going on in China at this moment, but I would recommend CAF Model and his owner Tom to all enthusiasts. His honesty, dedication to this hobby and diligence to fix all the problems and issues, are incredible. As Tom said in his last e-Mail, we are now best friends!!

 

My next post will present the kit. It will be a while before I start the construction, but wanted to relay the purchase of that kit and present it to our readers. This is a place holder for my next Build Log.

 

Yves

Edited Wednesday at 01:51 PM by yvesvidal

[yvesvidal]

Quick presentation of the kit. More details about the parts and assembly will be given as we move (slowly) through this complex kit.

 

The box as it arrived from China/CAF Model. Well protected and impervious to rain.

 

 

And we open the lid.... These guys are champions at packing and stacking an incredible amount of parts into a tiny space. I could not put everything back into the original box:

 

 

Instructions and PEs:

 

 

Fabric for the sails....

 

 

A kit in the kit... KIK...the boat:

 

 

 

Back to the main box:

 

 

Masts and strips:

 

 

Some of the numerous frames parts:

 

 

 

 

Details and a little gift from Tom: a miniature drill !!

 

 

Lots of ropes....

 

 

And tons of wood carved parts with brass guns and 3D printed details:

 

 

Two full size plans:

 

 

The special cradle to build the hull and assemble the frames:

 

 

 

Yves

[yvesvidal]

Let's take a quick look at some of the instructions. As usual, this is the CAF Model approach and it takes some thinking before jumping and starting to glue:

 

 

 

 

 

 

 

 

 

 

The boat has its own instructions in the little box.

 

Of course, that vessel is a lot smaller than the massive HMS Bellona. However, with its masts and oars, it will be a large model to display.

 

Yves

[JacquesCousteau]

Very cool, I missed most of your Bellona build so I'm looking forward to following along with this one. I quite like the look of Mediterranean vessels, and this seems like a fascinating kit.

[yvesvidal]

6 minutes ago, JacquesCousteau said:

Very cool, I missed most of your Bellona build so I'm looking forward to following along with this one. I quite like the look of Mediterranean vessels, and this seems like a fascinating kit.

Yes, like you I love what they call the "voiles Latines" (latin sails) which are so different from the traditional rigging of period ships. The boat provided in the kit is also equipped with Latin Sails and is a mini-Chebec in itself.

 

Yves

[gjdale]

Looks like an interesting project Yves. I’m grabbing a seat in the front row for this one.

[yvesvidal]

I was not planning to start this kit so early, but could not resist putting together the assembly berth for the hull. First the instructions:

 

 

 

Overall, it is like a 3D puzzle and everything dovetails quite well. There are a few exceptions, where filing a few slots is required. Everything is glued with Titebond wood glue and as such it takes a while. However, it is by far the most solid way to assemble this contraption.

 

 

I am using heavy plates of copper to make sure that the berth is absolutely flat during the gluing phase. No warping can be tolerated.

 

 

Again, as I do most of the times, I am not following exactly the instructions order.....

 

 

And this is where we stand at this moment:

 

 

Once completed, that should be a good "dry-dock" to assemble the keel and its 84 frames.

 

Yves

Edited Thursday at 06:48 PM by yvesvidal