Jump to content

Recommended Posts

Posted

Good evening everyone

 

sorry about poor photos - i will harder better tomorrow

the six  quarterdeck cannons are now completed that leaves a couple to do forward in the future, as i am not sure where i am going to put them, after all i still need room for the band 

the next bit will be paint any showing brass bits and train the ropes to lie down they have been pva glued to stop the fuzziness biut as a result they need to be dampened again and some weights to make them look a little more realistic

believe it or not as far as i am concerned the worst of this build it now over, maybe another 20-30 hours finishing things off on the hull then into phase two of the build, the bit i am so looking forward to

post-846-0-77188700-1410636781_thumb.jpg

post-846-0-77316500-1410636783_thumb.jpg

post-846-0-67440700-1410636786_thumb.jpg

post-846-0-11535200-1410636789_thumb.jpg

post-846-0-98079600-1410636792_thumb.jpg

Posted

Kevin,

 

    Glad your back in the shop again. You getting there a little at a time. Excellent work on the guns. Looking forward to the next set of photo's. Keep the pictures coming and Thank you for sharing as you always do.

Wacko

Joe :D

 

Go MSW :) :)

Posted

good afternoon 

 

thank you everyone for the comments and PM's

42 months after i bought her my build now has a name, 

apart from a repaint and fitting the emergency steering chain aft is now complete, good god i actually finished a bit - lol

post-846-0-72216700-1410707070_thumb.jpg

post-846-0-42942400-1410707073_thumb.jpg

post-846-0-92746000-1410707075_thumb.jpg

post-846-0-81747500-1410707077_thumb.jpg

post-846-0-80127100-1410707080_thumb.jpg

Posted

thank you David and Joe

Posted

Kevin,

 

Looking fantastic.  I hope you'll keep going.   BTW, is the binnacle loose?  Seems like it's not square in front of the wheel. 

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

well spotted mark it is one of the upcoming projects to do again, so yes it is loose, ( as kev turns around to the wife and says) (dam thats another couple of hours to add to the build time - lol)

Posted

Looking fabulous Kevin. 42 months to that stage is "speed building" in my books!

Posted

Wow Kevin, that's one handsome looking ship, congrats!  Your copper plating looks superb, high quality workmanship.

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Posted

Good morning 

Main mast

dowel sanded down to 12.7mm then put into a simple jig that allowed me to taper both sides down - the top is now 12.7mm x 8mm

a nail through one end allowed me to rotate the rod through 180 degrees to do the other side, and it worked no problem

used styrene strips to simulate the iron banding 

 

post-846-0-30880200-1411275231_thumb.jpg

post-846-0-32099200-1411275253_thumb.jpg

post-846-0-93909600-1411275254_thumb.jpg

Posted

i now tend to do some work and leave it overnight whilst i decide if it is going to be ok, or "DO AGAIN KEV" i am however quite happy with this so far, and will decide again after paining

post-846-0-56133700-1411275334_thumb.jpg

Posted

Thank you for likes and comments

 

Looks good so far Kevin.

Does the styrene take colour OK?

Arther - i spray painted the mast with white primer and then airbrushed the units with out problem - admiralty paints  

Posted (edited)

more work done today - I am actually quite pleased with the way things are progressing, oh and as it is Sunday, a trip into sunlight

 

please click on photo's for better image

post-846-0-38186500-1411325072_thumb.jpg

post-846-0-43434400-1411325075_thumb.jpg

post-846-0-21578800-1411325078_thumb.jpg

post-846-0-97118100-1411325080_thumb.jpg

post-846-0-52853200-1411325083_thumb.jpg

post-846-0-87870400-1411325085_thumb.jpg

Edited by Kevin
Posted

Hi Kevin,

 

She looking really smart mate, very well done.

 

That is one simple jig, but it's really effective, have to stick that in the old memory banks, thanks.

 

Be Good

 

mobbsie

mobbsie
All mistakes are deliberate ( me )


Current Build:- HMS Schooner Pickle

 

Completed Builds :-   Panart 1/16 Armed Launch / Pinnace ( Completed ),  Granado Cross Section 1/48

Harwich Bawley, Restoration,  Thames Barge Edme, Repair / Restoration,  Will Everard 1/67 Billings 

HMS Agamemnon 1781 - 1/64 Caldercraft KitHM Brig Badger,  HM Bomb Vessel Granado,
Thames Steam Launch Louise,  Thames Barge Edme,  Viking Dragon Boat


Next Build :-  

Posted

Mobbsie thank you

 

i my attempt to learn as i go on - and following example of others i am going to name some of the bits that i build- i appreciate that it is not the detail of the real thing, just the big bits 

post-846-0-20901300-1411326689_thumb.jpg

Posted

Dang Kevin, that's one handsome looking ship.  My jaw dropped when i gazed at the bow shot, awesome.  The masts look fantastic.

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Posted

Nice work on the masts so far Kevin - up to your usual excellent standard of work. Great photos too!

Posted

thank you Brian and grant and everyone else for the likes

 

Brian I don't have a home for her, lol but that wont be a problem until she is finished which will be another couple of years at this rate

Posted

Good afternoon my friends

 

masting continues, and all are wip

 

the main still has to grow another 6 inches but i am getting close to the ceiling, the main top still has to have blocks fitted

the bowspit is more or less finished with the exception of painting and blocks, must admit i enjoyed build that the plans didnt help through, worse than useless wrt to some of the info required

 

post-846-0-71606800-1411920321_thumb.jpg

post-846-0-98209500-1411920325_thumb.jpg

post-846-0-93078100-1411920327_thumb.jpg

post-846-0-77551300-1411920329_thumb.jpg

post-846-0-72567000-1411920332_thumb.jpg

post-846-0-27245700-1411920334_thumb.jpg

post-846-0-74481100-1411920336_thumb.jpg

post-846-0-36469800-1411920338_thumb.jpg

Posted

Hmm... near the ceiling?  Is it time to lower the workbench or raise the ceiling?   ;)   Looking super, Kevin.  I guess once the weather changes we won't see her outside for a long while.   Something about natural light just adds to the pictures.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...