Jump to content

HMS VICTORY by Kevin - FINISHED - Caldercraft - 1/72


Recommended Posts

Mark good evening

 

there is a pitch on my garage roof and the build is sat about 1/2 way with about 4 inches to spare when at full height but the lights will be in the way i will have to clear part of the work bench to give myself more height, but means stopping and sorting it out

post-846-0-85998600-1411925391_thumb.jpg

Link to comment
Share on other sites

i need to look into better lighting, the spots give out to much heat and my photo's and to dark/yellow

Link to comment
Share on other sites

Hi Kevin,

 

Just out of curiosity, how much do you think she weighs? Thanks.

 

Best,

Steve

30kgs when i bought her, she has put on weight since, i will update when i get the chance

Link to comment
Share on other sites

Great work Kevin. Keep the pictures coming as I'm enjoying watching your progress. I'm about to start fitting the quarterdeck fittings now I've finished planking the quarterdeck.

i still have a lot of hull work to do, but i wanted to ensure that everything i do from now on lines up with the masts, as when the stun booms are fitted my reach is going to be quite restricted

Link to comment
Share on other sites

Good evening everyone,

England, autumn and it wained today, lots of it, not had much at all of the wet stuff ever since the new roof went on, back in august

well spent most of today in the man cave, hoping to achieve much more than actually did

the bow-spit is in and wont be coming back out, pinned in 3 places, 

the gammoning stops has become a real pain, i made them over a year ago, directly from the plans (well that was the first stoooopid mistake), because when i came to fit it all together they didnt line up with the access holes, and as a result  the lines were at a angle, and as the bow-spit was fully fitted i had to do it in situ, 5 times a plum line did not help that much as there is not a clear route to get it to work 

i think i have it sorted now and will retry the rope work in the morning

post-846-0-09694700-1412455977_thumb.jpg

post-846-0-42680000-1412455979_thumb.jpg

post-846-0-18738400-1412455981_thumb.jpg

post-846-0-20489200-1412455983_thumb.jpg

post-846-0-03542400-1412455985_thumb.jpg

post-846-0-79717100-1412455987_thumb.jpg

post-846-0-93296700-1412455989_thumb.jpg

post-846-0-80454800-1412455992_thumb.jpg

Edited by Kevin
Link to comment
Share on other sites

been going through all the Victory logs now to look for Knightheads and martingale rigging, nothing that i have founfd in the instructions

Link to comment
Share on other sites

good afternoon 

 

work continues, as i try to catch up on all the months away from the build, and also try to catch up on all my friends logs

 

the gammoning went in much better today, the knight heads caused me some headache as to whether i needed two or three sets of blocks, i decided to go for the three, i believe they are for the martingales, but all this is new to me and will try to learn the names and update the log as i proceed, the boomkins and walkway are not fixed 

 

post-846-0-28260200-1412520799_thumb.jpg

post-846-0-50845200-1412520803_thumb.jpg

post-846-0-07018900-1412520807_thumb.jpg

Link to comment
Share on other sites

Kevin, that head on shot can be scary as it truly reveals the symmetry you've built in.  You nailed it!

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Thank-you Augie and for everyone with the likes, i just wish could keep her cleaner, and not look so tired,  

Link to comment
Share on other sites

i am reaching a Facebook group i am in parts of a ship as i plod along, if anyone i interested i will do the same on here within my build, lol hopefully it is right so far 

post-846-0-23409600-1412529324_thumb.jpg

Link to comment
Share on other sites

Is it you look tired or Victory?   The Vic looks very clean and I agree with what Augie said, in spades!!!

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Link to comment
Share on other sites

hello Bob, one big difference though, yours looks like it has been done with care and attention, mine well botched and painted over

Link to comment
Share on other sites

i am reaching a Facebook group i am in parts of a ship as i plod along, if anyone i interested i will do the same on here within my build, lol hopefully it is right so far 

THIS. Need more of this!

 

Half the time whist reading along in people's logs I get completely lost with all of the different terms and names for parts that get thrown around. Having a picture/illustration pointing out the location of these parts and what they look like helps (most importantly for me at least) how they then relate to other parts and the ship as a whole.

 

Sorry about being a nautical noob, but diagrams like this really help me clear things up in my mind's eye.

 

Model Ship World...

 

THAT I read for the pictures...

 

:P

Link to comment
Share on other sites

Kevin,

 

It's just beautiful. Period. End of conversation.

 

Best,

Steve

 

ps. In one of the pictures above there appear to be two ropes coming through a wall and attached to what might appear to be a gun port. What is that? Thanks. S.

Edited by Perls
Link to comment
Share on other sites

Link to comment
Share on other sites

good evening everyone

 

One very dusty looking build, lol you dont see the dust in the daylight

Foredeck cannonades completed and rigged, still finish of the loose end and create coils

flag locker, now has some simulated flags in place, but look a bit bright, in fact they look like rolled up card, which is exactly what they are

hammock cranes being put in, 

post-846-0-38979400-1413060856_thumb.jpg

post-846-0-91350200-1413060858_thumb.jpg

post-846-0-58957500-1413060861_thumb.jpg

post-846-0-59856200-1413060863_thumb.jpg

post-846-0-97205000-1413060865_thumb.jpg

post-846-0-70843300-1413060867_thumb.jpg

Link to comment
Share on other sites

Flag lockers look good to me Kevin - sometimes, just the suggestion of a detail is sufficient to create the illusion. Take a step back and look from a viewer's perspective - it looks great.

Link to comment
Share on other sites

Hammock netting

 

good evening everyone

 

this is definitely one of those (i can do better) sessions, lol it took me ages to find a systrm to secure the netting to the hammock cranes, but the photo's make it look pretty - well yuck, one i find a way that works for me - no doubt it will be done in a fraction of the time and hopefully look a lot neater

this is one side of the port poop deck

post-846-0-99390200-1413139478_thumb.jpg

Edited by Kevin
Link to comment
Share on other sites

very nice indeed. Love the rolled up flags

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Hi Kevin

Your build is coming along great B) I wouldn't worry overly about the dust,I keep dusting mine off with an airline and blow gun,but the  PCB/computer cleaning aerosols from Maplins work just as well if you don't have a blowgun for the compressor.

Regarding the hammock netting,have you thought of using thin brass wire through the cranes and tying the netting to that.Just a suggestion,but I would of thought it would have made things much easier to keep straight and uniform.

 

Kind Regards

 

Nigel

Currently working on Royal Caroline

Link to comment
Share on other sites

thank-you everyone, and mobsie for dropping me a PM, i now have had a rethink and a day off tomorrow to do the (redo)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...