janet bode Posted September 1, 2014 Share #1 Posted September 1, 2014 Here is a photo of my Red Dragon by A-Latina, the model has taken me two years,after a little illness. edmay, mattsayers148, Shipyard sid and 7 others 10 Quote Link to comment Share on other sites More sharing options...
janet bode Posted September 1, 2014 Author Share #2 Posted September 1, 2014 (edited) Further to my build i have enclosed a photo or two. Edited August 28, 2015 by Janet B mattsayers148, CaptainSteve, Shipyard sid and 18 others 21 Quote Link to comment Share on other sites More sharing options...
edmay Posted September 1, 2014 Share #3 Posted September 1, 2014 Hello Janet, It may have took long but what a beautiful looking model,what type of wood did you use on the deck and upper planking,very neat workmanship,is it a kit if so by whom, truly nice job. Edwin mattsayers148 1 Quote Link to comment Share on other sites More sharing options...
PrimoDude Posted September 1, 2014 Share #4 Posted September 1, 2014 Janet, you have great dexterity and talent in your hands.. Wonderful work. Thumbs up... "Woody" mattsayers148 1 Quote HMS Victory 1804 Caldercraft scale 1.72 (not 1.75) Build start, May 1, 2014. Link to comment Share on other sites More sharing options...
jud Posted September 1, 2014 Share #5 Posted September 1, 2014 Janet, Excellent work, close fitting and well detailed. jud mattsayers148 1 Quote Link to comment Share on other sites More sharing options...
janet bode Posted September 1, 2014 Author Share #6 Posted September 1, 2014 Janet B Thank you for your kind comments edmay,as regardrs Red Dragon the deck is made from lemon wood it is a wood i like using, i bought a log and had it riped down to manageble sizes. The deck is fully treenailed and as far as i could research to scale,although it is very difficult to gain info about Chinese Junks.Upper planking is Lime,headrails are made from flexible Beech as the curves can be tricky,i discarded the cast windows and built new ones as i felt i wanted the practise,the rudder shaft is splt half way from the tiller it made it easier it will be eventually joined. Hope you find this interesting. Janet Vivian Galad, mattsayers148, Dee_Dee and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Vivian Galad Posted September 1, 2014 Share #7 Posted September 1, 2014 Janet, I´ll follow your build. The 2 of us are constructing this kit and is great to see each one is a really singular ship. Yours is a neat job. Great! mattsayers148 and Dee_Dee 2 Quote Current: Red Dragon (modified) by Vivian Galad - Artesania Latina - 1:60 Oseberg (modified) by Vivian Galad - Amati (1:50)Cocca Veneta by Vivian Galad - Corel - 1:70 Finished 15th Century Latin Caravel kit model from Artimanha models Link to comment Share on other sites More sharing options...
augie Posted September 1, 2014 Share #8 Posted September 1, 2014 She is simply quite beautiful. Thanks for sharing her with us. mattsayers148 1 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
mtaylor Posted September 1, 2014 Share #9 Posted September 1, 2014 Very well done, Janet. I'm looking forward to more. By the way, I merged your two topics on this. To keep things together, just scroll the bottom and use the box labeled "reply to this topic". mattsayers148 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
The Sailor Posted September 1, 2014 Share #10 Posted September 1, 2014 Hi Janet Everything looks neat and clean. Very nice work. mattsayers148 1 Quote Cheers, Richard. ------------------------------Current build: Mercury, Russian brig, America's Cup Yacht Endeavour (1934), AmatiCompleted build: HM Schooner Pickle, JoTiKaNext: Link to comment Share on other sites More sharing options...
maggsl_01 Posted September 1, 2014 Share #11 Posted September 1, 2014 Hi Janet congratulations - you do a phantastic work on your model. looks very very accurate. It is as Vivian said before: 2 modellers, one kit - two differnet ways to look at a model. It is interesting to see and compare. Best wishes Max mattsayers148 1 Quote Next: Friedrich Wilhelm zu Pferde by Euro Model 1:47 Finished: Half Moon Corel; HMY Royal Caroline Panart; HMB Endeavour Occre 1:54; Fregatte Berlin, Corel, 1:40 A life without dogs is possible... but worth to live? Link to comment Share on other sites More sharing options...
Sjors Posted September 1, 2014 Share #12 Posted September 1, 2014 That's just great Janet ! And this is the first model you make ??????? I wish I could do that on my first...or second...or third ! Sjors mattsayers148 1 Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre Link to comment Share on other sites More sharing options...
gjdale Posted September 1, 2014 Share #13 Posted September 1, 2014 That is some really lovely work Janet! Please keep posting more progress pics. mattsayers148 1 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
FrankG Posted September 1, 2014 Share #14 Posted September 1, 2014 Hi Janet, What a good looking ship - well done. You say its a kit from A-Latina, but that you have had a lemon wood log ripped down to manageable sizes - does that mean you have replaced the timber that was in the kit? mattsayers148 1 Quote Frank Build log: Palamos: First build http://modelshipworld.com/index.php/topic/7779-palamos-by-frankg-occre-scale-145-first-build/ Link to comment Share on other sites More sharing options...
janet bode Posted September 1, 2014 Author Share #15 Posted September 1, 2014 Janet B Hi Frank I replaced all of the decking and used Lemon wood (i tried to order Boxwood but my supplier said he only had Lemon, he said it was similar but i am not so sure) however i find Lemon quite a nice wood to work with.All of the gunwale rails i replaced with Flexable Beech. mattsayers148 1 Quote Link to comment Share on other sites More sharing options...
*Hans* Posted September 7, 2014 Share #16 Posted September 7, 2014 I like it! No colours but only the natural wood can be very nice! I often don't know what to do. Paint it - or not? mattsayers148 1 Quote Hans Owner of Kolderstok Models - 17th century Dutch ships. Please visit www.kolderstok.com for an overview of the model kits available Link to comment Share on other sites More sharing options...
Salty Sea Dog Posted September 10, 2014 Share #17 Posted September 10, 2014 Really nice work Janet! I'd like to see more pictures!! mattsayers148 1 Quote -Buck Current build: AL Morgan's Whaleboat (1st build) Kits in the ships locker: I cannot confirm nor deny that there may be a few kits in there... Link to comment Share on other sites More sharing options...
janet bode Posted September 11, 2014 Author Share #18 Posted September 11, 2014 (edited) To all of you who made such nice comments about my model i truly thank you. The Red Dragon is my first model in a sense because i bought one Red Dragon from Antics it was the only wooden kit they sold, so when home and atacked the kit i got as far as completing just the hull,i had just joined MSW SO When i compared my workmanship to some of models in the gallery i realised my model was a bit of a mess so i put it in the trash bin the refuse collecter picked it up and put it in his cab.I Went back to Antics to see if they had anything i could buy and there on the shelf was another Red Dragon kit so now i had bought severel books the result is as you can now see. Regards to all Janet B Edited October 10, 2014 by Janet B Dee_Dee, avsjerome2003, edmay and 14 others 17 Quote Link to comment Share on other sites More sharing options...
jud Posted September 11, 2014 Share #19 Posted September 11, 2014 Doesn't matter what you are making, having something to see and aim for is a great help setting the standards and quality and you can see what is possible. Great work on this one. Can't help but think that, that driver must have seen something to admire and save in your first efforts, maybe you dropped the seeds for a new modeler.. jud piperjoe and mattsayers148 2 Quote Link to comment Share on other sites More sharing options...
Vivian Galad Posted September 11, 2014 Share #20 Posted September 11, 2014 Janet, happy to know you persevered cause you reached an awsome result. I´m anxious for your next pics ^_^ ! mattsayers148 1 Quote Current: Red Dragon (modified) by Vivian Galad - Artesania Latina - 1:60 Oseberg (modified) by Vivian Galad - Amati (1:50)Cocca Veneta by Vivian Galad - Corel - 1:70 Finished 15th Century Latin Caravel kit model from Artimanha models Link to comment Share on other sites More sharing options...
janet bode Posted October 10, 2014 Author Share #21 Posted October 10, 2014 I have posted further pictures of my Red Dragon build as you can see i have added arnement.The guns took me five attempts untill i was satisfied, iI made up blanks for all of the sides spot glued them together and machined them all in one go, they all came out exactly the same i was quite pleased with the results. I made a simple jig for the trunnion clamps all of the guns are fitted with wedges i have not added any tackle to date i am considering whether too or not. hope you find my build of interest. Kindest regards to all janet (bode) Vivian Galad, mattsayers148 and jud 3 Quote Link to comment Share on other sites More sharing options...
Grimber Posted October 17, 2014 Share #22 Posted October 17, 2014 The ship is very sharp looking. Shows you put allot of time and thought into every piece. mattsayers148 1 Quote Current Build Log(s): -Swift Virginia Pilot Boat 1805- Artesania Latina 1985 no sails kit. My first wooden ship build. - Carrack - Woodkrafter Kits Completed Build Log(s): -Pirate Ship- Woodkrafter Kits Ship in a Bottle - First ship in a bottle kit build. -The Secret Revealed Boat in a Bottle Kit- Authentic Models - Ship In Bottle On the Shelf to build: - Build a Ship in a Bottle Kit - Authentic Models - The Chesapeake Bay Flattie - Midwest Products - Armistad 1832 - Serial Modellbau - San Gabriele 1497 - Serial Modellbau - Clara May English Ketch - Artesania Latina - Santa Maria - Scientific - Margaretha - Tris Model - Paranzella - Tris Model Link to comment Share on other sites More sharing options...
janet bode Posted October 26, 2014 Author Share #23 Posted October 26, 2014 Hi everyone. Thank you all for your most kind comments about my Red Dragon,i gave a lot of thought about the guns i thougt it a little strange that they were fixed on to the deck,it bothered me so much i started to make them on trucks although i felt a little uneasy,it was then i spotted the sketch of the guns being loaded outboard that is to say one of the gun crew climbed over the gun rail sat astride the barrel and proceed to load, a little precariose in the heat of battle. So that is what i settled for, has anyone any further thoughts on this i would be intrested on any details.The ship incorperates some details may-be not found on Junks but i used the kit to practise my workmanship so i must appologise if some parts are not true to the type. bye for now, Janet. mattsayers148 1 Quote Link to comment Share on other sites More sharing options...
Redbeard Posted October 27, 2014 Share #24 Posted October 27, 2014 Great build Janet! Looking forward to more updates. mattsayers148 1 Quote John Current Build: MSW 18 Century Longboat 1:48 Next Build: MSW Bluenose 1:64 Link to comment Share on other sites More sharing options...
giantdog Posted October 27, 2014 Share #25 Posted October 27, 2014 wow, what great work. mattsayers148 1 Quote Swift 1805 - scale 1:50 Artesania Latina Link to comment Share on other sites More sharing options...
Sjors Posted October 28, 2014 Share #26 Posted October 28, 2014 Great job Janet !!!! So clean that it is almost unbelievable ! Sjors mattsayers148 1 Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre Link to comment Share on other sites More sharing options...
janet bode Posted December 5, 2014 Author Share #27 Posted December 5, 2014 Thanks to everyone for your very kind comments,as i am very disabled it does take me considerable time to build,so i hope to post pictures in the future. I am at the moment attempting to make the sails for my Red Dragon of course i am on home territory here, it seems to be dificult to find any infomation as to how they are made eg: which way do the panels run and also which side of the sail bamboo strechers go, ideas would be most welcome. Bye to all Janet B mattsayers148 1 Quote Link to comment Share on other sites More sharing options...
edmay Posted December 5, 2014 Share #28 Posted December 5, 2014 Hello Janet,Simply outstanding,love the way the woods have blended together, the neatness of your work is first class. Wishing you wellness. Edwin mattsayers148 1 Quote Link to comment Share on other sites More sharing options...
Carmelo5150 Posted December 6, 2014 Share #29 Posted December 6, 2014 Looks awesome! Just started my Red Dragon after finishing a few small kits. As soon as I figure it out I'll start a build log. Quote Link to comment Share on other sites More sharing options...
Vivian Galad Posted December 9, 2014 Share #30 Posted December 9, 2014 Janet, I´m struggling with my sails. At first I was all about using the kit´s cloth, but now, I´m not so sure. Thing is the sailcloth AL provides feels too industrial, so now, I´ll research a little bit more before installing the sails. The bamboo should be behind the sail as for all images I´ve seen till now. mattsayers148 1 Quote Current: Red Dragon (modified) by Vivian Galad - Artesania Latina - 1:60 Oseberg (modified) by Vivian Galad - Amati (1:50)Cocca Veneta by Vivian Galad - Corel - 1:70 Finished 15th Century Latin Caravel kit model from Artimanha models Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.