Michiel Posted February 15, 2013 #1 Posted February 15, 2013 What was done before part 1: The development of the hull: Mirabell61, EricWilliamMarshall, flying_dutchman2 and 4 others 7 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Michiel Posted February 15, 2013 Author #2 Posted February 15, 2013 (edited) from here the log continues, but I'll keep updating this post with new side views: 4. march 2013: november 1st 2013: Edited November 1, 2013 by Michiel Omega1234, Farbror Fartyg, henkvankomen and 13 others 16 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Michiel Posted February 15, 2013 Author #3 Posted February 15, 2013 (edited) What was done before part 2: Konstapel kamer: Edited February 15, 2013 by Michiel flying_dutchman2, druxey, FrankWouts and 12 others 15 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Michiel Posted February 15, 2013 Author #4 Posted February 15, 2013 (edited) What was done before part 3: some more details shots: batteries and switch for the lighting inner planking First carving Cabin More carving just before painting... Have fun, Michiel Edited February 16, 2013 by Michiel EdT, Farbror Fartyg, Jeronimo and 12 others 15 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Michiel Posted February 16, 2013 Author #5 Posted February 16, 2013 What was done before part 4: Lighting EricWilliamMarshall, Omega1234, ZyXuz and 17 others 20 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
WackoWolf Posted February 16, 2013 #6 Posted February 16, 2013 Nice to see your back. Please keep the Post and pictures coming. I enjoy this build and will be watching all the way to the end. Quote Wacko Joe Go MSW :)
Michiel Posted February 16, 2013 Author #7 Posted February 16, 2013 well I guess that will still take a while , but that's the good thing about this hobby ... good to hear you enjoy my build Best, Michiel Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Arjan68 Posted February 16, 2013 #8 Posted February 16, 2013 Nice to meet you on this forum too Michiel ! As you know, I've followed this build closely on a dutch forum. I'm still impressed by the amount of detail you add to the ship. Quote If it doesn't bend, it breaks.
Michiel Posted February 16, 2013 Author #9 Posted February 16, 2013 (edited) Thanks Arjan, I actually started on this forum, and Jack and Jan dragged me over to the Dutch one as well... Edited February 16, 2013 by Michiel Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
keelhauled Posted February 18, 2013 #10 Posted February 18, 2013 Truly increadible! The detail is amazing. The interiors and lighting effects are an inspiration. Thanks for sharing!! Quote Currently building the Cutty Sark http://modelshipworld.com/index.php?/topic/1000-cutty-sark-by-keelhauled-mantua-kit-bashed-first-wooden-ship-build/
mtaylor Posted February 18, 2013 #11 Posted February 18, 2013 Michiel, Reposting has not tarnished this at all. It's a wonderful build. EricWilliamMarshall 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Michiel Posted February 18, 2013 Author #12 Posted February 18, 2013 Thanks guys, your words are much appreciated, I started painting the underwatership yesterday, there may be some updates later this week. Best, Michiel Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Michiel Posted March 4, 2013 Author #13 Posted March 4, 2013 The underwaterschip is now painted: I see now on the picture that some corrections are still in order :mellow: the bow: and the first work on the second gundeck: Have fun, Michiel Jeronimo, tarbrush, Aussie048 and 4 others 7 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
amateur Posted March 4, 2013 #14 Posted March 4, 2013 Hi Michiel, Looking good, but shouldn't the schaarstokken around the main hatch touch each other sideways? Jan Quote
Michiel Posted March 4, 2013 Author #15 Posted March 4, 2013 Thanks Jan, We just had a many page discussion on the schaarstokken... including comments from Ab, But I think your right in all drawings of pinas's they do, the thing is that the hatch is rather large here, I stick to Ketting and with the batteries there I can't make it smaller. The distance between the main schaarstokken is now ~7 feet, and with that is fits nicely around the other hatches and the anker spill. So it's a bit of a compromise.. Best, Michiel Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Foremast Posted March 4, 2013 #16 Posted March 4, 2013 This is an amazing log, Michiel! Did you make sculptures by yourself? Alex Quote If any of you cry at my funeral, I'll never speak to you again! (Stan Laurel)
amateur Posted March 4, 2013 #17 Posted March 4, 2013 Ah, missed that discussion... Will drop in there Jan Quote
Michiel Posted March 4, 2013 Author #18 Posted March 4, 2013 Thanks Alex, Yes I'm cutting them all from box wood, I only just started though there is an enormous amount of carving on this ship. So there's a lot to practive ;-) Best, Michiel Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Foremast Posted March 4, 2013 #19 Posted March 4, 2013 Sculptures are really well done! Compliments! Another question: how did you make hull's nailing and caulking? Regards Alex Quote If any of you cry at my funeral, I'll never speak to you again! (Stan Laurel)
Michiel Posted March 5, 2013 Author #20 Posted March 5, 2013 Thanks Alex The nails in the hull (cherry planks) are made from chestnut thorns like this: I drill 0.5 mm holes, then I pull a thorn from a shell a dip it in some glue and stick it in. When it's dry I cut most of with a small pair of scissors and than sand it further. Finally a scrape the entire section and apply danish oil. For the deck planks I find the thorns to dark and I just use tooth picks, without any further processing, just pushing them in so that they fill the 0.5mm hole. Again after oiling you get a very nice contrast due to the grain direction difference. The planks I make black on the sides with shoe polish from a tube with sponge, (the sponge is attached to the tube). You get the best result if you sand the side just a bit as well, especially the short sides. The shoe polish is instantly sufficiently dry and does not get into the wood. The sanding does fill the space between the planks a bit which may seem to diminish the effect. However, after applying the oil they come out nicely again (not if you apply a lacker though! then the sand dust stays in there and makes the effort in vain.). Obviously for a bit more historically correct color you could use a dark brown polish... FrankWouts, EricWilliamMarshall, avsjerome2003 and 1 other 4 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Foremast Posted March 5, 2013 #21 Posted March 5, 2013 Thanks for explanations, Michiel. The final effect of your work is really good. Alex Quote If any of you cry at my funeral, I'll never speak to you again! (Stan Laurel)
michael mott Posted March 5, 2013 #22 Posted March 5, 2013 Very nice work Michiel. Michael Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Michiel Posted March 6, 2013 Author #23 Posted March 6, 2013 (edited) In the meanwhile I also finished the rack of muskets, so that asks for new photo's of the cabin: Best, Michiel Edited March 6, 2013 by Michiel FrankWouts, Farbror Fartyg, druxey and 8 others 11 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
sonicmcdude Posted March 6, 2013 #24 Posted March 6, 2013 Welcome back! Is good to see that you restarted this tread. Keep the pictures coming! Quote Greetings, Sinan Build log:TRITON POB 1:72
mtaylor Posted March 6, 2013 #25 Posted March 6, 2013 I don't remember seeing the musket rack. Is this new? I love that candle. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Michiel Posted March 7, 2013 Author #26 Posted March 7, 2013 I showed a picture before of a single musket, the rack is new. Next thing here will be a rack over the windows for dining plates. There will be an other bench on the aft side as well, eventually. I also finished the bed for the captain but it still needs sheets and a blanket. the wiring for the candle runs through one of the legs, I drilled a 0.5 mm hole through a toothpick.... Best, Michiel Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Piet Posted March 8, 2013 #27 Posted March 8, 2013 Hello Michiel, Love the lighting effects and your clean work. Cheers, Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
Michiel Posted March 9, 2013 Author #28 Posted March 9, 2013 (edited) Some more progress on the planking of the gundeck... Wooden nails in the planks and iron bolds in the schaarstokken. Best, Michiel Edited March 9, 2013 by Michiel DORIS, FrankWouts, avsjerome2003 and 3 others 6 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
newbuilder101 Posted March 10, 2013 #29 Posted March 10, 2013 Great job! The musket rack is terrific and the candle too! Quote Sherry Every goodbye is the birth of a memory... Current Build: San Felipe Finished Builds: Mayflower Build Log Gallery: Mayflower
Michiel Posted April 6, 2013 Author #30 Posted April 6, 2013 another part finished for the lower deck. This time fully scratch in every sense: the wood is pear from the garden, saved from the firewood pile.. Farbror Fartyg, avsjerome2003, itsme74 and 3 others 6 Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.