-
Posts
4,328 -
Joined
-
Last visited
Everything posted by Landlubber Mike
-
I agree with SpyGlass - the nuts are mounted really high up the keel. You have to factor in the pedestal height, as well as the height of the baseboard or the base of your display case.
- 110 replies
-
GMO and Mobbsie, so sorry to have missed your posts on this log. I was so focused on my Renommee that I neglected to look here. Thank you for sharing your techniques! Mobbsie (and GMO), no worries at all about asking permission to post pictures on my log - the more the merrier! I would love to see the results of your work. Aldo, thank you very much for the kind words. The Morgan is a nice subject - long history, you can see it at Mystic Seaport in Connecticut (it was recently refurbished - not sure if that is the right term), and it's something other than the multi-cannon subjects typically seen. Lots of cool and interesting details that go along with these whalers too, like the tryworks. It's been a nice learning experience building this ship because like most MS kits, this one requires you to add framing pieces, whereas the European manufacturers tend to use things like gunport strips and the like to make things easier for the builder. It's also been nice working on this subject because I'm going to get to "paint with wood" - though, we will see how well that turns out.
-
Wow, this is sure to be another masterpiece. Hope you don't mind me following along. Loved your Dragon, and it's clear your Tiger is going to be another beauty.
-
Aldo! Thanks for looking in my friend. It's a really beautiful subject, and Euromodel makes a nice kit. Plenty of complexity and optionality from Euromodel to help me learn new skills. It, along with the other two models I'm working on should get me to the point where I can start trying scratch builds. I see you mothballed your Pegasus, are you going to take it up again? I'm at the point where I am going to start scratch building some of the decorative elements of the ship. I wanted a little more experience before doing so, and started the Charles Morgan. Then I needed a break from the Morgan so started the Renommee. I ran into stages of burnout with the Badger (some lasting six months) that I found bouncing between builds helps keep my interest going. Nils, thanks very much and thank you for looking in. It's a beautiful subject, and Euromodel makes a very nice kit that allows you to add as many details as you would like, so it's been fun to work on. I was originally thinking of selling it last year to move to scratch building, but I've already gained valuable experience with this kit that I'm glad I'm building it.
-
Nils, I just spent the last hour going through your log and some of your completed logs. Can't believe I missed this one! What a beautiful project! I have to agree with everyone that your use of figures really brings your models to life. I'm also so impressed by how you have managed to find external detail pieces like the decorative brass railings and added them to the model so seamlessly. That decorative brass rail in particular worked very nicely. Thanks for posting such a detailed log. I learned a lot of tips and techniques going through it. For example, that hollow drill bit worked out very well. Also, your work with cast resin for the ornamentation looks like a very good technique that us fellow modelers should learn.
- 692 replies
-
- eagle of algier
- chebec
-
(and 2 more)
Tagged with:
-
Just read through your log Zappto, very nice work on a beautiful subject! The colors and details you used, along with your craftsmanship, are making this a real showpiece for Mamoli.
-
Nils, so sorry I missed the conclusion of this build. Wow! Really amazing work on this and the other models in your personal museum. Absolutely incredible detail and precision. Your work on such complex curves for models like this, the Pamir and Gorch Fock and really impressive. I also look to your Pegasus log often when working on mine. By the way, your wife is a saint for helping and allowing for such large models to be displayed. When I finished my first model (the Badger), my wife was concerned that I'd fill the house with models. I told her I work so slowly that she won't have to worry about that ever happening. Congratulations again my friend. I just signed up for your Chebec log which is going to be another stunner
- 2,625 replies
-
- kaiser wilhelm der grosse
- passenger steamer
-
(and 1 more)
Tagged with:
-
Aldo!!! I'm so happy to see you back here my friend. It's been quite some time, and I was wondering how you were doing. You've made some really nice progress on your Triton build - it's coming along fantastic! It's really cool to watch you move from kits to scratch building, in particular, your work with the plans and CAD. The CAD stuff is a brave new world for me, so I'm taking notes while watching you. Stay good my fellow Badger Brother. Glad to see you are back
-
Really impressive work Jason. Top notch, masterful joinery, painting, etc. Incredible! On the rudder coat, I saw that Micromark now carries “leather paper” - I think it’s a kind of textured paper that simulates leather. I’ve never used it so can’t vouch for it, but just throw that out there if you are looking for potential materials.
-
Very nicely done BE. The stern to me is one of those make or break parts of the model, and it looks like you executed it flawlessly.
- 574 replies
-
- cheerful
- Syren Ship Model Company
-
(and 1 more)
Tagged with:
-
Looks really nice from here Gary, don’t be too hard on yourself! It’s very nicely done! Are you planning to paint or stain the hull below the wales? At first I thought you painted it white to simulate the white stuff, but I’m guessing it’s the natural basswood? Whatever it is, it’s a nice contrast to the other colors of the hull.
-
Thanks very much Hubac and Russ. Glad to get confirmation from others! Chris, I think that might be on the cards. I need to start practicing though. It’s actually a more complicated figurehead in that the Zeus figure is fronted by an eagle with an outstretched wing, that I think Zeus is holding onto. Might be a little tricky but possibly not too bad with the cast figurehead as a model.
-
Looks great Russ. White paint can be tricky, if not unforgiving when it comes to showing mistakes. Your build and paint job look fantastic!
- 420 replies
-
- captain roy
- lugger
-
(and 2 more)
Tagged with:
-
Love the blue and the carvings. Very nice job!
- 961 replies
-
Joe I’m down in FL at Disney with the family. Nice break from the cold we’ve been having in our area!
- 682 replies
-
- halifax
- lumberyard
-
(and 1 more)
Tagged with:
-
Aren’t there parts that are 1.5 and 2mm ply? My Caldercraft Badger kit had similar ply that chipped if you looked at it.
- 110 replies
-
Bob, happy New year to you. Just caught up on your log and wasn’t surprised to see your usual high level of craftsmanship. Nice job!
- 682 replies
-
- halifax
- lumberyard
-
(and 1 more)
Tagged with:
-
The ply was really crumbly for me too. At least the deck ply will be covered - I believe that some of the thin laser cut sheets are made of similar crap 👎. Not a big deal as I’m scratching those parts, but just forewarning that these are delicate and you might need paint and filler.
- 110 replies
-
I didn’t want to find out. I suppose if you’re very careful everything out be fine but I preferred having more stability. It was pretty easy to do, so why not.
- 110 replies
-
Very nice Don! They are going to be a really nice touch.
- 223 replies
-
Take a look at my Pegasus log. I added additional support for the deck along the centerline to be on the safe side. The bulkheads don't adequately support the deck.
- 110 replies
-
The veneer saw is a great tool. I bought one to saw the bulkhead extensions after BE’s recommendation. Not a necessity, but makes things very easy!
- 223 replies
-
Don, let me add my admiration to the others. Really nice job! I’m not aware of other kits that take this temporary approach, but makes a lot of sense to me. Another creative feature of these MarisStella kits.
- 223 replies
-
I believe I did get smaller cannons for the swivel guns. Don’t remember if they were RB of not. I believe they were. I also have some Caldercraft ones that could work. For hull planking, the planking runs were certainly made up of multiple planks. TFFM (I believe volume 2) has a sample hull planking diagram. Shorter planks, especially if you spile them, will be less prone to clinking.
- 110 replies
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.