Jump to content

druxey

NRG Member
 View Profile  See their activity

  • Posts

    12,675

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    Is that photo-etched work?
  2. druxey
    Moulded dimension (or the moulding way) is measured across the face of a curved timber. Sided dimension is its thickness. Usually the latter is constant in dimension.
  3. druxey
    Similar diagonal braces against the side of the hull aft were called sleepers, not pointers.
  4. druxey
    I'm sure that you are correct about your statement on the non-naval ships, Bruce. I don't think I suggested otherwise.
  5. druxey
    Oh, my! I'm just catching up on your last few weeks of work. That chaloupe is simply a lovely little gem. Hopefully the geometry of the quarter gallery lights will work out for you. Looking good!
  6. druxey
    To confirm: pointers were X oriented diagonal braces across the ship's hull, popular in the 16th and 17th centuries. However, they cut down on space in the hold. Riders replaced these.
  7. druxey
    I responded by PM, Dan.
  8. druxey
    I understand this arrangement and don't question it, Siggi but, in general, it is unusual! I imagine the hinges would be well protected when under the replaceable lining. Also, even when not shown on the draughts, the lining would have been there.
  9. druxey
    Why bother with a make-shift lathe of any kind? The old time spar-makers simply made the spar a tapered square in cross-section, then planed it octagonal, finally 16-sided and then rounded it off. One can do this easily at model size using a V shaped holder and a 7-10-7 proportioned scale to mark the sides of the square stick out before cutting it octagonal. One can use a mini-plane or sharp chisel for this. It takes little time and, at model size, after the 8-square is cut, sandpaper does the rest of the job. No power equipment required!
  10. druxey
    Interesting quotation. This was apparently a merchant ship. In a naval one, the spaces between the frame timbers were filled to the level of the floorheads with oak, presenting a continuous surface. The circumstance described could not have happened. Also, in naval ships the floors were planked over (the ceiling planking) and permanent iron ballast placed above that.
  11. druxey
    Coagulate is the word you are looking for. According to the Internet - which, as we know, is infallible! : Egg whites coagulate at 60°C, egg yolks 65°C, with full coagulation occurring at 70°C. But, once again, we digress!
  12. druxey
    Good grief!
  13. druxey
    Dan: There are several liquid solutions used by conservators to consolidate brittle and fragile lines. Cellulose nitrate in acetone is one possibility. HMG adhesives in thick and thin formulations are others.
  14. druxey
    I wonder whether there are still enough pieces of The True Ship around to reconstitute her.... Just kidding!
  15. druxey
    My, but that planking looks great with the fastenings in place! Well done, Toni!
  16. druxey
    I hope you've labelled that piece, Michael. Otherwise some day it may be mistaken for firewood....
  17. druxey
    That is interesting that a gun port was placed in the path of the anchor lining. I don't question it - it is on the original draught, but quite unusual.
  18. druxey
    Longridge will make all things clear! (Well, nearly all.)
  19. druxey
    Hmm. Are you sure that he isn't the Fat Controller on vacation?
  20. druxey
    Who is the inspector, Michael? Is that your alter ego?
  21. druxey
    And Bob, do not forget the weskit (waistcoat). See also: https://www.bbc.co.uk/archive/sutton_hoo_dig_collection/zs6xqfr Interviews with those involved in the actual dig. If you've seen the movie, there is quite a difference in the characters!
  22. druxey
    Ah! Now I understand the question. Scarphs are generally oriented so that any stress is at right angles to the joint line. The one on the left will resist an up and down stress, whereas the one on the right will resist lateral stress.
  23. druxey
    Nice and neatly done so far!
  24. druxey
    Using a die like that is an interesting technique. Thanks for sharing it.
  25. druxey
    Update on a reconstruction: https://www.bbc.com/news/uk-england-suffolk-55939515

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...