Jump to content
MSW Spring Donation Drive

druxey

NRG Member
 View Profile  See their activity

  • Posts

    12,417

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    Sigh. Make haste more slowly....
  2. druxey
    No so much nibbed, more like a drop plank. Certainly an interesting feature.
  3. druxey
    Might I suggest masking tape to prevent scuffing next time? No matter how careful one is, it always happens otherwise!
  4. druxey
    Glad to see you re-appear here, Ben. I hope that the new workshop will be worthy of your model!
  5. druxey
    Interesting question. I imagine that the side planking would overlap the bottom plank at the chine, similar to a ply hull. This means planking the bottom first, then the sides.
  6. druxey
    Box fan? Not a good idea. The motor can produce sparks, igniting solvent fumes. Fans designed for fume extraction have special non-sparking motors. Try not to use volatile flammable solvents if you can possibly avoid them!
  7. druxey
    I've only started to look through your log from the beginning, Daniel. Amazing work at that scale indeed. And the amount of detail you are putting in is extraordinary. Probably the most un-kit-like kit model in existence!
  8. druxey
    Hmm. Toni, you have potential for a second-hand instrument business there!
  9. druxey
    Yes, 3D parts are more tricky for sure. The strategy I use is to cut the profile according to my card pattern from wood that is slightly too thick, shape the (inner) mating surface to fit, then the outer one. If I try to shape all surfaces at the same time, the scrap box opens its mouth!
  10. druxey
    Looks even better now to my eye, Alex. Lovely!
  11. druxey
    Neat result, though, Bob. Do you make card patterns for tricky pieces? I find that strategy keeps the scrap box hungry.
  12. druxey
    I suspect you can only remove polymer coatings using abrasives. Not a bad idea to remove lacquer that way as well, as acetone can be deadly, as mentioned.
  13. druxey
    Ask yourself what you will use the lathe for before you start. Defining your needs will help you focus on the machine you actually need. Wood turning? Metal turning? Both? What is the longest item you may need to turn? What is the largest diameter? These are starter questions even before considering budget.
  14. druxey
    Thank you, John. So, if I understand correctly, the lower part of l'estain is like a cant frame, and the upper part twists to become parallel to the couples.
  15. druxey
    The meant the mast bands or hoops, not the mast itself! The 'made mast' was of many, many pieces of wood.
  16. druxey
    Old question (April 30!): the mast bands were made and driven on in one piece. Just caught up with your build log, isalbert.
  17. druxey
    I believe that SeaWatchBooks will be there with a range of their new publications. Bring your pocketbook, credit cards and first-born.
  18. druxey
    Bava: it's not puzzling when you realize that the lines (that appear straight on the half-breadth plan) are their projected shapes on the sheer plan. They would only be straight if the ship were a rectangular block. Cut a loaf of bread straight down, but at an angle to its long axis, and view it from the side. Then you'll get it.
  19. druxey
    Looks like she's fully laden: that bow goes deep in the water on the down pitch! Very effective animation, Magnus.
  20. druxey
    If you're building models, Clare, you don't need cable. I've been without it for some years now and don't miss it! On the other hand, I need to buy more book shelves....
  21. druxey
    So, if I understand you correctly, the line of l'estain in the body plan is the projected view of this element?
  22. druxey
    Yes, isopropanol breaks down PVA. However, it will reset if not cleaned off the joint. Isopropanol should be available at a drug store (chemists).
  23. druxey
    Glad you think so, Alex. The brightness 'jumps out' visually right now. Everything else looks terrific.
  24. druxey
    Beautiful, Alex. However, might I suggest toning down the color of the cement a little?
  25. druxey
    Three (or four) right hand lay ropes spun up left-handed will make a cable, not just thicker rope.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...