Jump to content
Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click on photo to order. ×

druxey

NRG Member
 View Profile  See their activity

  • Posts

    13,130

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    Admiralty Models is running sailmaking workshops shortly.
  2. druxey
    I suspect bucklers were the thing if freeboard were low, making her a 'wet' ship. Otherwise, port coverings on an open deck make no sense.
  3. druxey
    Looking very nice, Christian. However, I suspect that the joints in the stem would be staggered as I've re-drawn. (Based on NMM draughts of other Revenue cutters. For instance, see Skylark, 1821) You might wish to consider this. Usually the keel would be only two pieces.
  4. druxey
    You should be able to cut and fit hanging knees in your sleep by now, Ed! She's looking beautiful.
  5. druxey
    Lovely draught marks, Remco! Are you putting them on the stern post as well?
  6. druxey
    Love that drop plank at the bow!
  7. druxey
    For technical information and plans from the surveyed wreck, the book you might consider is Mary Rose, Your Noblest Shippe edited by Peter Marsden. It comes in a slip covered set: one book and a folio of plans.
  8. druxey
    She must be Jason of 1794: note the golden fleece!
  9. druxey
    Nicely adapted from Ionic capital geometric construction, Mark. Now let's see it translated into 3D reality!
  10. druxey
    Ed; you wrote: "I made the deck hook in two pieces to save on wood and was not too particular about the way the pieces are joined since this will all be covered by decking and the forecastle." Your 'not too particular' is other folks' excellence!
  11. druxey
    Well done. The lofting was obviously correct and your workmanship excellent, Juergen!
  12. druxey
    Tartarus was one of the Thais class of fireship, built to the same lines as Comet, but far less decorated. Wasp was lucky, as Tartarus and her sister ships were very fast.
  13. druxey
    Guess you wanted your model to have room to breathe, Toni! You probably left the fillers out because the spacers were in your way.
  14. druxey
    The edge should be sharp enough to act as a scraper. It would be difficult to put an even burr on a tiny profile. If the scraper does get dull, hone the flat sides of it to restore the edges.
  15. druxey
    For small shapes, use escapement files (watchmakers' supplies or eBay). A piece of old hacksaw blade, softened by heating to cherry red and air cooled, makes an excellent and durable scraper. Light cuts with little pressure to gradually form the moulding are best: heavy cuts will tend to wander.
  16. druxey
    1) Mahogany is not the best choice of wood for bending to the curves required on models. 2) Ammonia is unpleasant and, as many have already suggested, not the best choice or, in fact, any choice. So, choose a specie of wood that will readily bend with either hot water or steam (or a temperature controlled hot iron). Then all will be happiness.
  17. druxey
    'Birnbaum' is literally 'pear tree', i.e. pear wood.
  18. druxey
    Thursday evening at the hotel bar? What time, Clare?
  19. druxey
    Looks pretty darn good to me, Jason! Well done.
  20. druxey
    For stable wood that is unlikely to warp, Castello or degame would be my first choices.
  21. druxey
    I don't know the definitive answer to your question. However, the lower plan is a little suspect as reef points came in about the end of the 17th century. I'd go with Van de Velde: he was around at the time! His lateen mizens are definitely triangular. Bonnets went out of fashion as reefing came in.
  22. druxey
    This continues to be very impressive work, Karl!
  23. druxey
    Those blind mortises look very tricky! Nicely done, Tadheus.
  24. druxey
    Please, please don't use power tools when tired or distracted! I'm glad that the damage was only minor, Jason.
  25. druxey
    According to Lyon, The Sailing Navy List, Licorne was initially armed with 26 12-pounders on the upper deck. These were reduced to 9-pounders on 2.11. 1778. This would imply that the forward port was used. Possibly the gun carriages here would need modification to fit a cannon.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...