Jump to content

Armed Virginia Sloop By captain_hook - FINISHED - Model Shipways - Scale 1:48


Recommended Posts

Looking great.  I like your work on the winch and the butte, very nice.  Not sure about the cat-head location, but that's probably just because I'm so used to seeing it in a different location on mine!

 

Enjoying watching your progress, thanks for sharing.

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...

Thank you very much for the kinds words and the Likes. I took a 4-week break from modeling the AVS to prepare my next project, the H.M. Brig Badger POB in 1:48 scale. Drawn the bulkheads and some parts in Corel Draw to have them lasercut soon. Now it is time to return to the AVS. Installed all iron bands on the bowsprit. 

8A774EEF-0F35-4037-AA81-A6C152643FFD.jpeg

AB7AB1EE-9208-4B5D-A943-2E9639E4D32F.jpeg

084D88FC-B856-4F3E-9CE9-1E660860F950.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Added the stop chocks. This completes the boom except for the heel lashing and the footropes which will be done with the rest of the rigging later. Next is installing the guns. I think about a way to store some cannonballs. Maybe I add some sort of rack or sheet beside each gun storing 5 cannonballs. 

EE852DA5-E7FE-4BF2-BB89-794A3D65B97D.jpeg

D39086B5-43EF-457D-8BF5-B4AD292DF3ED.jpeg

4441F77C-D7FC-4E66-9A9E-10152EC76EE8.jpeg

1C2DDC9D-BACF-4864-9F7D-5DB2BF18EB4A.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Beautiful ! -very nice work and nice pictures !  Late to the party but look forward to following along 😊

Edited by gerty

Current Build: Willie L. Bennett - Model Shipways

 

Future Interests:  Friendship Sloop - BlueJacket Ship Crafters

                            Cape Cod Catboat - BlueJacket Ship Crafters 

                       

Link to comment
Share on other sites

Thank you very much. I glued the guns in place. First I drilled a hole through the front axle, pinned that with a short 0,7mm nail (so that the nail is only about 0,5mm longer than the bottom of the front wheels) and positioned the gun in place. Pressed it down until the nail in the axle marked a spot on deck and drilled a hole into the spot through the deck. Then glued a longer pin into the axle and that into the predrilled hole on deck. Positioned until it has the correct angle. Epoxy gives a lot of time for correcting the angle. Next is gluing the eyebolds.

E10CC0D9-C290-46E1-92DF-CBCB247DD639.jpeg

FC96B313-F65E-4314-A13B-B1CF5405A776.jpeg

1241D79E-DDA2-4C39-B1C1-8F48315417E9.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Only small updates these time. Glued the eyebolts of the breech lines in place. Have to shape the breech lines after glu is dry. Will add the gun tackles next weekend.

E788CB31-3618-4BAC-BD8A-472846FE2B90.jpeg

90BE9CFC-0AEE-4198-ADF0-35A461D86CA8.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

I finished the channels (donˋt know if that is the correct english word for ‚Rüste‘ - the sheet, where the chain plates are fitted on). Also installed all eyebolts on deck. All that is left (before rigging) is finishing the guns, gluing all the deck items and installing the mast.

4FF7BF15-69B2-49BA-B816-6E4A987B6AC4.jpeg

DB530A43-E973-4880-A00D-369C4C6305C5.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

  • 2 weeks later...

As I wait for some rope and fittings from Syren Company to arrive, I thought about adding a shot garland to each cannon. Since the 3-pounder cannonball has a diameter of about 6,5cm AFAIK 1,5mm steel balls may be a little oversized but a smaller diameter would be too small to recognize. The garland stores 6 balls each and is made of 1,5mm square stripes with addition to 1x3mm stripes glued to each sides. Then the space for the balls (9mm) is enclosed by 1,5mm square stripe pieces. Sanded both sides so the garland is only 2 mm thick in the end, then sanded a 30 degrees slope on each side and rounded the edges. Have to paint them red and installed them next weekend.

AE1C7375-3BA6-42A1-9F73-2EC2CD351688.jpeg

F60D5122-AC9E-46FC-8BF9-B5EE9F8B4BC4.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Added a ramrod to every cannon. It is made of a piece of 1/16‘‘ square stripes drawn through a 1,6mm hole drilled in a piece of stainless steel. Then tighten in a dremel and brough to shape with a needle file.

94E51A00-E496-468D-B7E3-BAC4F593F856.jpeg

F4AC11B7-C693-4EE9-8900-E664D07AB94B.jpeg

41006E64-7F06-4F0C-841D-4D61D40FB03C.jpeg

DDCD5D58-952C-40A5-A28E-753B5FA4B13A.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Nice touch with the ram rod. You don’t see little details added like that very often. Good job. 

 

 

 

Able bodied seaman, subject to the requirements of the service.

"I may very well sink, but I'm damned if I'll Strike!" JPJ

 

My Pacific Northwest Discovery Series:

On the slipways in the lumberyard

Union, 1792 - 1:48 scale - POF Scratch build

18th Century Longboat - circa 1790 as used in the PNW fur trade - FINISHED

 

Future Builds (Wish List)

Columbia Redidiva, 1787

HM Armed Tender Chatham, 1788

HMS Discovery, 1789 Captain Vancouver

Santiago, 1775 - Spanish Frigate of Explorer Bruno de Hezeta

Lady Washington, 1787 - Original Sloop Rig

 

Link to comment
Share on other sites

Thank you. The ramrod is only one of the tools to serve a cannon but it will represent all of them.

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Are we gonna see the other two cannons soon ? BTW She looks so good I'm gonna give upon mine. It's embarrassing. :)

 

 

Dwight

 

current build : Fair America by Model Shipways

 

Completed Build : 18th Century Armed Longboat by Model Shipways Armed Virginia Sloop by Model Shipways

 

Under the bench : Syren by Model Shipways ,, Rattlesnake by Model Shipways

Link to comment
Share on other sites

Thank you for the nice words and the likes. Rigging the guns is time-consuming, but at least I made all the gun tackles. I used syren 1/8‘‘ single and double blocks and 0.45mm rope for the tackles as well as 3mm blacked brass hooks. Will make the rope coils tomorrow if I find the time. Have to bring the breech lines to shape as well.

FD12B06E-BC85-424F-8F60-D2F28E02830C.jpeg

00090A91-0ADC-4934-911C-CECE399DFE31.jpeg

 

 

 

EE9CF758-3648-4A5A-BB20-58F05A2B991B.jpeg

35336ADD-54FA-4E2D-A66B-CE87112A5983.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

As I slowly move towards rigging, I thought about adding some last details to the hull before adding the mast. The supplied ship‘s wheel is made of britannia casting and I decided not to use it. So I made a 8-spoke 23mm ship‘s wheel scratch build made of castello. It is a shame that it will be almost covered by the binnacle.

B0A5564A-3846-4071-B00D-7013371A53AF.jpeg

3D1B4268-AA49-4229-B55E-93D60E3B9817.jpeg

E70ACB6E-594D-4998-844F-F3CAD80EC929.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Superb new detail. Perfect as usual 😉

Jean-Paul

 

'You are not carving a bear with a chain saw here folks',

Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions

 

Current builds :

 

Finished build :

 

Next on list :

  • HMS Winchelsea 1764 - Syren Ship Model - 1:48
Link to comment
Share on other sites

  • 2 weeks later...

I haven‘t found the time yet to finish the gun tackles due to some nice spring weather to go out with family. But finished some mast hoops to replace the cast ones.

579DCB4E-29FF-48BF-B76D-2DD6E4BA5DCF.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Finally the gun rigging is complete. A mast? We don‘t need it. ATTACK!!

D2DB9DA5-1642-4D50-9EA7-5E77C0BFC15B.jpeg

69066DAF-99D2-4E26-B3FE-A137B62E3BD6.jpeg

0158B225-0512-4628-8D0A-6DD02612C72D.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Incredible!

 

John

 

Member: Hampton Roads Ship Model Society

Current Builds: Tugboat Dorothy  Newport News Shipbuilding Hull #1 (complete)

                            Iron Clad Monitor (complete) 

                            Sardine Carrier which I will Name Mary Ann (complete)

                            Pilot Boat John H. Estill Newport News Shipbuilding Hull #12 (my avatar)

                    Harbor tug Susan Moran

                    Coast Guard 100' patrol boat

Link to comment
Share on other sites

Thank you very much for the nice words and the likes. Been working on the mast today, added wooden clamps and redone the mars so that it stays parallel to the deck. For now all parts are only dry-fitted.

 

D6A45A81-D94D-4950-9D28-E70BBB54E371.jpeg

E6167410-50B7-4E2E-A177-7459EA6EC46C.jpeg

 

807CD113-5F28-4891-AC17-3DC6E5BB25A3.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Impressive to say the least!

     Current:         Emma C. Berry Lobster Smack-Model Shipways-1:32-1866

        Back on the shelf:    USS Essex- MS- "Old Yellow Box" Solid Hull  Wall Hanger (Half Hull)                                                                                                                                                                                              

   Completed:    18th Century Armed Longboat-MS 1/24

                          USN Picket Boat-MS 1864 1/24                                  

                          US Brig Syren by Sea Hoss- Model Shipways-1803

                          18th Century Carronade/Ship Section

                          Mayflower-Pilgrims Pride by Sea Hoss-Model Shipways-1620

                          18th Century Long Boat by Sea Hoss-Model Shipways

                          USS Constitution by Sea Hoss-Revel-Plastic

Link to comment
Share on other sites

Thank you for the nice feedback and the likes. The ship‘s wheel has been completed and all deck items are now glued in place. Time to start prepairing the rigging and completing the mast. I have to finish the base too.

FC5BFF17-8559-4280-B90C-2038B1439AE4.jpeg

AA658D44-5612-4A77-A94D-5CCB58760399.jpeg

A4BFD24B-9423-4A95-AE0E-6F831E8FB429.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

  • 4 weeks later...

Before I will get to the final chapter - the rigging - I have thought some time about a more realistic launchway and have made a start already. Next step will be gluing the launchway onto the board, cover the sides with the prepared birch strips and cover the painted area with grey gravel (1,2 - 1,8 mm).

A98A5DD2-E96E-4EA6-B076-7C11076854B9.jpeg

68B93C71-CEE6-4BD0-A860-255BAF23577F.jpeg

BA67040E-10BF-45C1-9A4C-E3A135BAE9CC.jpeg

645EDCA6-8A50-4B8E-945E-B237DA9C18BD.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Only small updates. I have painted the base with satin varnish, installed the 4 cover stripes and two octagon bollards painted black.

AD6C05EF-3AFA-475C-BA5C-C9FA7A91BFCC.jpeg

6564C467-AE01-4637-9FAC-8C14DFB1C22B.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

The gravel is glued with with white glu dilluted with water (50-50). I first brushed a thin coat, then strewed the gravel onto the base. Used a brush to cover the gravel with dilluted glu to fix it permanently. It has to dry at least for several hours. Then I can  move on to the second part, the carriage.

9DFA19E7-3993-4349-8B43-D34330982865.jpeg

D87B1FBB-A0B1-4BCF-9532-A57BFA9A6838.jpeg

30312A89-22E0-40A8-A9B3-B911E412CEEE.jpeg

64FAFC31-6ED7-4A68-9517-A4869B5C53F6.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...