G.L. Posted September 2, 2018 #1 Posted September 2, 2018 Part 1: Introduction of a new project: With my Triton cross section running to its completion, it is time to look out to a new cross section project. My eye fell on a former group project of our modeling club ( https://dedissel.weebly.com/ a cross section of a Lowestoft smack, based on drawings of the smack 'Master Hand'. One of the club members, Georges Verleene, an experienced ship carpenter (now retired), wrote for this project a very detailed monograph with lots of detailed drawings. The group project went on many years ago, but lucky for me Georges had still a copy of the handout left. 001.pdf ccoyle and kees de mol 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
G.L. Posted September 2, 2018 Author #2 Posted September 2, 2018 (edited) Why building a smack? At the start of WW 1 a lot of Belgian fishermen evaded to England with their vessel. Below a picture of the exodus from Ostend in October 1914. During the war they became familiar with the English smacks which were larger than the Ostend two-mast sloops. Some of them returned to Belgium with a smack. The structure of a smack was more slim of that of a Belgian sloop. After the example of the English smack, Belgian shipyards started to build smacks as well. But Belgian ship carpenters were so used to build sturdy sloops that their smacks were always heavier and wider than the English smacks. Belgian smacks were faster than the Belgian two-mast sloops, but they remained always slower than the English smacks. In general Belgian fishermen had more confidence in the robust Belgian built vessels than in the English ones which they called scornful 'yachts'. Despite several Belgian ship owners ordered their vessel in Brixham, Lowestoft or Fleetwood. So in the twenties of previous century smacks became very common in the port of Ostend, Belgium's principal fishery harbor of that time. My cross section will be an imaginary smack. Based on the measurements made in 1945 by Mr. Edgar March for his book 'Sailing trawlers' of the Lowestoft smack 'Master Hand' and mixed with Belgian shipbuilding elements as provided in the monograph of Mr. Georges Verleene. The handout is meant to build the cross section to scale 1/30, but I will build to scale 1/20. I like it a bit bigger. The 'Master Hand' was 24 m long and 7 m wide. The cross section covers the hull between frame 36 and frame 49, including the foremast. Picture of an authentically restored fishing smack of the Lowestoft fishing fleet: Excelcior. Edited September 2, 2018 by G.L. kees de mol, tarbrush, yvesvidal and 14 others 17 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
michael mott Posted September 4, 2018 #3 Posted September 4, 2018 GL This looks like a very interesting project, I shall be sitting alongside all the way. Michael druxey, John Allen and mtaylor 3 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
BANYAN Posted September 4, 2018 #4 Posted September 4, 2018 Agree with Michael, this will be an interesting subject and build. Very fortunate you were able to get a thoroughly researched set of plans and info. cheers Pat mtaylor and druxey 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
trippwj Posted September 4, 2018 #5 Posted September 4, 2018 This looks fantastic - love these fishing type vessels. Mind if I also follow along? druxey and mtaylor 2 Quote WayneNeither should a ship rely on one small anchor, nor should life rest on a single hope.Epictetus
G.L. Posted September 9, 2018 Author #6 Posted September 9, 2018 (edited) Michael, Pat, Wayne and all the likers, I am flattered by your interest. I will do my best to keep your attention until the completion of this project. This week I started the build with the making of a building platform. Part 2: The building board Before starting with the construction of the model, a slipway has to be built. I make my building board as described in the practicum. I first draw the outline of the cross section frames on millimeter paper and glue it on the base plank. A smack was down at the stern, therefore the building board must have a downward slope towards the after end. In the middle of the base plank comes a kind of clamp in which the keel will be clamped. This clamp has the same downward slope. The frames will be placed perpendicular with the base plank on the keel. Building board in detail: A: Base plank with outline plan of keel and frames. B: 2 bolts with wing nuts. C Clamp plank, screwed an glued to the base shelf. D Thin lath with the same width as the keel thickness. E: Plank, 1 millimeter thinner than the keel thickness, 9 millimeters lower than the clamp planks, glued to clamp plank C. F: Adjustable clamp plank to secure the keel on the slipway with the wing nuts. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 Edited September 9, 2018 by G.L. tarbrush, aviaamator, mtaylor and 6 others 9 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
cog Posted September 9, 2018 #7 Posted September 9, 2018 (edited) something European, continental & without guns for a change... count me in! Edited September 9, 2018 by cog kees de mol, John Allen and mtaylor 3 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
G.L. Posted September 15, 2018 Author #8 Posted September 15, 2018 Well Carl, I will try not to disappoint you. Part 3: The Keel The keel is made of two pieces of oak, laminated on each other to easier the making of the rabbet. Of the two pieces two corners are planed to a well determined angle. The two parts of the keel are now glued together with the planed angles against each other. The joined planed angles now form the rabbet. At the bottom of the keel a 1.5 cm thick plank is screwed to give some more workspace below when the model stands on the slipway. Later it will be removed again. I place the keel on the slope of the slipway to draw off the angles of the keel edges. The keel edges have to be sawn perpendicular to the ground plane. Foto Now I mark the notches in which the frames will rest. I saw them with the circle saw and file the notches out. The finished keel on the building board. G.L. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 BANYAN, kees de mol, yvesvidal and 11 others 14 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
Baker Posted September 16, 2018 #9 Posted September 16, 2018 Started without me? I take a chair and watch and learn. mtaylor 1 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
G.L. Posted September 16, 2018 Author #10 Posted September 16, 2018 1 hour ago, Backer said: Started without me? I take a chair and watch and learn. Sorry Patrick. Next time I will give you a heads up when I start an new project. You didn't miss a lot, the keel is just laid. Time for a Tripel! G.L. Baker and mtaylor 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
G.L. Posted September 22, 2018 Author #11 Posted September 22, 2018 Part 4: The frames The building method of frames for smacks in the United Kingdom was usually with one layer of futtocks which were assembled with horizontal or vertical joints. I will build my cross section in the Belgian way with two layers of futtocks like described in the practicum of Mr Verleene. I first draw the frame plan on a piece of paper (A3 format) with under it a piece of carbon paper, carbon side on top. In that way the picture of the frame is visible on both sides of the paper. I lay the frame plan on a piece of glass to have a perfect plane surface to glue my frame. I glue the different parts of the bottom futtock with paper glue on the paper. To make sure that there is a full overlap of the upper futtocks with the bottom futtocks, I draw the frame outline on the bottom frame with the help of carbon paper. Then I glue the second layer of futtocks with wood glue. On top of the frame I glue another copy of the frame plan and cover the whole with a second glass plate and some weights. Next day the glue is dry and the frames can be sawn out. A sawn out frame. And sanded. On Belgian built smacks the two layers of futtocks were firmly riveted one to another with stubby steel bolts. An each side of each joint a bolt was punched. The distance between the two bolts was ± 20 cm. Before placing my bolds I pre drill holes in which I nail small nails. The excesses on each side are pinched off and finally I file the nails until they have a flat surface with the frame sides. I glue a temporally support at the topside of each frame to avoid as much as possible deformation of the frame. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 BenF89, BANYAN, kees de mol and 17 others 20 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
John Allen Posted September 22, 2018 #12 Posted September 22, 2018 (edited) G.L. Great Subject looking forward to this build going to be a big one. Like the idea of a cutaway. I have a great respect for fishers of all nations "those that go down to the sea in ships" hope I quoted that correctly. (psalms 107) Deja Vue Last night watched 1937 movie with Spencer Tracy Captains Courageous great flick excellent video for the time fishing on the Grand Banks. Edited September 22, 2018 by John Allen correction michael mott, Baker, jud and 2 others 5 Quote John Allen Current builds HMS Victory-Mamoli On deck USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build Finished Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine Model Co.
Baker Posted September 23, 2018 #13 Posted September 23, 2018 Beautiful work. I am still jealous of your drawing skills as preparation . John Allen and mtaylor 2 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
G.L. Posted September 30, 2018 Author #14 Posted September 30, 2018 On 9/22/2018 at 2:24 PM, John Allen said: G.L. Great Subject looking forward to this build going to be a big one. Like the idea of a cutaway. I have a great respect for fishers of all nations "those that go down to the sea in ships" hope I quoted that correctly. (psalms 107) Deja Vue Last night watched 1937 movie with Spencer Tracy Captains Courageous great flick excellent video for the time fishing on the Grand Banks. John, I share your respect for the fishermen. They have hard and dangerous job, just a month ago a Belgian boat capsized, with the loss of two of the five crew members. I searched for the movie Captain Courageous on YouTube and saw some trailers. It is a movie that I want to see, didn't find the full movie yet, but I continue searching. G.L. John Allen 1 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
G.L. Posted September 30, 2018 Author #15 Posted September 30, 2018 On 9/23/2018 at 12:13 PM, Backer said: Beautiful work. I am still jealous of your drawing skills as preparation . Patrick, I believe that your first emoticon is a bit undue. I just follow the instructions written by Mr Georges Verleene in his excellent handout. Thanks for the reaction anyway. G.L. mtaylor and Baker 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
G.L. Posted September 30, 2018 Author #16 Posted September 30, 2018 Making frame after frame. The frame production goes on. Still 7 to go. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 mtaylor, aviaamator, John Allen and 7 others 10 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
Mark Pearse Posted October 1, 2018 #17 Posted October 1, 2018 this looks very interesting, I'll be happily following your build Mark mtaylor, G.L. and aviaamator 3 Quote completed 1:12 28' Ranger type yacht, scratch build - COMPLETED 1:12 20' 1930 open sailing boat, half model, scratch built - COMPLETED 1:12 24' Ranger type yacht, scratch build
G.L. Posted October 1, 2018 Author #18 Posted October 1, 2018 5 hours ago, Mark Pearse said: this looks very interesting, I'll be happily following your build Mark Welcome on board, Mark. I am an interested follower of your 28 feet Ranger yacht build. Magnificent model and also a beautiful yacht! G.L. ward and mtaylor 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
G.L. Posted October 6, 2018 Author #19 Posted October 6, 2018 All 14 frames are finished. Here you see the most forward frame (the smallest) together with the most afterward (the biggest). G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 BANYAN, kees de mol, aviaamator and 9 others 12 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
BANYAN Posted October 6, 2018 #20 Posted October 6, 2018 Quite the production run GL; look forward to the hull coming together. cheers Pat cog and mtaylor 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
G.L. Posted October 13, 2018 Author #21 Posted October 13, 2018 On 10/6/2018 at 11:45 PM, BANYAN said: Quite the production run GL; look forward to the hull coming together. cheers Pat Here we go, Pat! Part 5: Mounting the frames To mount the frames vertically, I place a board perpendicular on the base of the slipway. The board can be moved over the full length of the keel. To center the frame tops, on each horizontal support the middle is marked. This mark must match the center line on the board. Two frames placed. To keep the space between the frames equal, I glue temporally some spacers between each frame. G.L. Completed projects: HMS Triton cross section - FINISHED - ;Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 yvesvidal, DORIS, mtaylor and 15 others 18 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
cog Posted October 15, 2018 #22 Posted October 15, 2018 My you are at a run, love the way you use your build log, very educational AntonyUK, Jack12477 and mtaylor 3 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
G.L. Posted October 20, 2018 Author #23 Posted October 20, 2018 Thanks for your comment Carl and all the others for the likes. Five frames set. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 IgorSky, mtaylor, Baker and 6 others 9 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
G.L. Posted October 22, 2018 Author #24 Posted October 22, 2018 Seven frames in place. Still seven to go. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 BANYAN, mtaylor, Jack12477 and 8 others 11 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
G.L. Posted October 27, 2018 Author #25 Posted October 27, 2018 All 14 frames are placed on the keel. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 kees de mol, Jack12477, DORIS and 10 others 13 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
michael mott Posted October 27, 2018 #26 Posted October 27, 2018 Looking good, and eager to see what comes next. Michael G.L. and mtaylor 2 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Baker Posted October 28, 2018 #27 Posted October 28, 2018 Congratulations. Beautiful work. You have earned a tripel cog, John Allen and mtaylor 3 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
G.L. Posted November 3, 2018 Author #28 Posted November 3, 2018 Thanks Michael, Patrick and the likers, Next item is the keelson: Part 6: The keelson The keelson is made of oak. The notches for the frames are made in the same way as I did for the keel. The keelson is glued in place. The mast step is also placed. G.L. Completed projects: HMS Triton cross section - FINISHED - Scale 1:24 Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Cross section Fishing Smack - Scale 1/20, POF, approx. 1920 GrantGoodale, Mirabell61, Jack12477 and 13 others 16 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
John Allen Posted November 3, 2018 #29 Posted November 3, 2018 Very nice. mtaylor and Baker 2 Quote John Allen Current builds HMS Victory-Mamoli On deck USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build Finished Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine Model Co.
michael mott Posted November 3, 2018 #30 Posted November 3, 2018 Looks Great I am enjoying following along. Michael mtaylor and Baker 2 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.