Jump to content

Andrea Gail by popeye the Sailor - FINISHED - 1:20 scale


Recommended Posts

I'm with you, Popeye.  I just may have chosen someone saltier to portray Cap'n Billy.  

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

gee......who would you have had in mind.......David Hasselhoff?  :D   ohhhhh,  right.......he was known for brawn....not brains!!  :D

 

soooooo.......anyway......tinkering still going on.....cleaned up the nasty rod ends on the reels and touched them up.   added some strip stock to the top edge of the pilot house,  to stiffen the side walls up.   I took a look at the Tree Boat's hull frame to get an idea where the bulkheads are on the Andrea Gail.  the area of interest is between the third and fourth bulkhead.......if I remember,  it's roughly 51 mm.

 

post-612-0-19480400-1421431533.jpg

 

from this,  the template was made.  the fourth bulkhead is the fore deck bulkhead on the A.G...since the top rub rail follows along the main deck line, I used it as a reference.   staying within the increment,  I was able to drill the pilot holes.......then a size larger.

 

post-612-0-27736800-1421431858.jpg

 

the next size after that put the holes close to the size of the porthole inserts.   19/64ths......I used a rat tail file to enlarge them the rest of the way.

 

post-612-0-38424400-1421432097.jpg

 

post-612-0-00239500-1421432181.jpg

 

it went well........only one very........very tiny chunk occurred!   I figure paint will take care of it  ;)   the fore deck railings were adjusted and cemented.......still need to be trimmed

 

post-612-0-95536800-1421432548.jpg

 

I drilled the holes for the aft section of the trawl rig.......but it made the rig unstable....bother!   the Billing's kit doesn't have the portholes....figured I'd put 'em in. 

 

post-612-0-44348200-1421434326.jpg

 

small issue with the exhaust fan..........working to get it resolved  ;)

 

 

 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

That worked out well Denis, you don't have to worry about it any more.

 

michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

thanks George and Michael........my main concern was hitting one of the bulkheads.  but it all worked out!  :)

     

thanks for the good word and to those who hit the like button  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Looking very nice Popeye and glad things worked out to your liking.

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Link to comment
Share on other sites

thanks Piet  :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

I have little problems with my english to understand some of your thoughts, but, generaly, great build and very interesting log

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

WOW!!!....... DENIS... THAT IS SO COOOOOOOOL.   this is definitely another WINNER!!!

 

Frank

completed build: Delta River Co. Riverboat     HMAT SUPPLY

                        

                         USRC "ALERT"

 

in progress: Red Dragon  (Chinese junk)

                      

Link to comment
Share on other sites

thanks Patrick!  ;)

 

 

if you find that there's something that your in question of Nenad....just let me know.  I will do my best to explain things a bit further.  thanks for the good word and for looking in  :)

 

gee Frank.......thanks a lot!! ;)   I count myself lucky to be able to decipher these Billing's plans,  as well as I do  ;)   I have both sets of plans......the smaller kit  BB608....and the larger ABS hull version BB526.  I've been following the 526 plans more.   thanks for the good word!

 

...and again,  thanks to those who are following and hitting the like button  :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

HOLY COW!!!!   I've been catching up on all the builds I watch.......MAN!!   you folks have been busy!

 

    I watch so many builds......it's a wonder I get any of my own building done  :).....I love it though,  so many beautiful builds out there........and more ideas that I can shake a stick at  ;)    so much......that I had to take a day off from work.   no....I didn't play hookey.......I have plenty of time to cover it!   I still have two weeks of vacation time.......took one for the Christmas holiday.......and now the admiral is ribbing me for when I'm gonna do it again.  you'd think that after a four day  'week end'....she'd be sick of me :D  :D

   Gibbs loves it when I'm home......actually he like to goad me into the living room,  so he can sit on the floor with his chewies......or sit with me on the couch and watch TV!   you should have seen him the day he saw a real horse!  :D  :D    here's one of his favorite poses,  in his efforts to get me into the living room

 

-----------> post-612-0-24374800-1421769038.jpg

 

:D  :D  :D  what a HAM!!!!!!!  he has a few other tricks......but I would have to show you in video  :D

 

anyway........Monday started out with something I wanted to do for a couple of sittings now......the start of the upper gangway

 

post-612-0-56943700-1421769179.jpg

 

it will span the length between the first section uprights.......it's what the tall ladder is for.  I also wanted to put the finish on the rack / podium......first adding extra  divider pegs for the floatation buoys.

 

post-612-0-40207700-1421769362.jpg

 

then.....a little sanding to get them all to match

 

post-612-0-44110000-1421769445.jpg

 

I got out some of the netting that I had found a while ago,  in one of my scavenger hunts.   the kit supplies green netting for the reels......but I have some in brown as well.

 

post-612-0-10210000-1421769569.jpg

 

I also brought out some tulle.....for another area of the build......not sure what the kit supplies for this,  but it is shown in the instructions.

 

post-612-0-85306000-1421769645.jpg

 

the gangway frame got the platform floor put on at this time

 

post-612-0-42527500-1421769743.jpg

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

That gangway is a real piece of work!  Give the puppy a hug from me.

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

the tulle was used to net off the railings of the podium........I was looking at the lower area.   there is a part that is level with the cap rails.....I have such an itch to put something there......it's killing me!   the plans show nothing there.......so it's a hard decision  {I don't want a  'man overboard'  situation}  ;)    I got a bit rushed with this.......the top part of the podium frame has been added as well.

 

post-612-0-04348600-1421770150.jpg

 

post-612-0-28107800-1421770215.jpg

 

oh.......oh.......picture problem......:(

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

FINE!!!!   I'll just do a reset!

 

post-612-0-88040200-1421770438.jpg

 

there.......it worked now!  ;)    the instructions call for a single rail on the gangway........I have stanchions for three rails.......I'll use them  ;)   after all.......I don't want to copy the plans to the letter now,  do I?!?!

 

post-612-0-36876000-1421770618.jpg

 

one corner is a bit more than the other,  but with what it took to do this,  I left it.   I saw that it was just the matter of drilling another hole,  moving the offending stanchion,  and then filling the hole,  but it's all cemented at this point........really don't want to see what it would look like after ;)   ahhhh,  but we all know what happens to things that irritate ;)   I then made up what I believe is the sampson post......I think I cut the  cross bars a bit too short......I may make another .

 

post-612-0-15358800-1421771080.jpg

 

more bits of detail was added to the first section of the trawl rig......those horseshoe looking thing I showed earlier found a place here.   the yokes at the ends of the cross bar were also added......these are Billing's idea of the pintle / gungeon assembly in some of their kits  {I'm giving them the benefit of the doubt here}.   I also have some of the plastic yokes used in some of their gaff parts....I hang onto them.......use them for other things.

 

post-612-0-98122300-1421771543.jpg

 

yea........this process was a bit rushed as well........I failed to take pictures of the step by step.   the gangway is in place at this point.

 

post-612-0-32121400-1421771644.jpg

 

post-612-0-62225600-1421771657.jpg

 

I had to do a dry fit........but now it is unstable.   I used a prop pole for this,  since I haven't got the roof done yet.   it's the next thing.........

 

post-612-0-49200900-1421771781.jpg

 

as a matter of fact.........here is the beginnings of the roof.....left to dry over night

 

post-612-0-12422100-1421771832.jpg

 

now the shaping.......the visor {front and sides}..........I really need to get some paint on her,  so the pilot house can be cemented in place.   the next update should be in detailing the structure  :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Link to comment
Share on other sites

thanks Augie........you caught me in mid post  :)    the gangway looks much better now  ;)  Gibbs says thanks  :)

 

thanks Matija....I appreciate the kind comment and welcome to my log.......always glad to see new folks  ;)  :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

thanks George!    .....that little tube of super glue......at one point,  I couldn't find it!   I looked through the mess on my table...and I couldn't see it.   I knew I had removed the build - up on the nozzle....but what did I do with it from there?   I found it hanging off of my shirt!  it must have been on the edge of the table, and I leaned in to do something!

 

it's the weird stuff....it makes one laugh!  thanks for the good word!  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Good place to hold superglue, to always know where is. I must try this ... ;)

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Link to comment
Share on other sites

Great Scott Popeye, you are going like gang busters with this build!  Marvelous detail work.

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Link to comment
Share on other sites

Looking good, Popeye.  I have no idea what's what there, but I'm sure that when it's all together, I'll know.  :)  ;)

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Denis you do seem to be going along at a pretty good pace on this build, it is looking great with all the details that you keep adding. The tube of glue fiasco made me laugh, sort of like looking for ones glasses while wearing them.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Amazing Popeye,

 

You still find the time to look at other builds and creating a masterpiece of your own build !

I don't know how you are doing it but you are doing it !!!!

Hat off for you Sir !

And give the Admiral an hug from me ( I love dogs but not to hug them  :P )

 

Sjors

Link to comment
Share on other sites

it's a losing battle Sjors........I'm JUST getting caught up again!!!!  .....and that's just the scratch builds!!!  thanks for the good word!  :)

 

:D :D Nenad and Michael...........I think that's where 'crazy glue' got it's name.    never stick it in your pocket though........we all know what happens to pens ;)   thanks for the good word as well :)

 

Omega {Patrick},  Piet,  and Patrick....thanks for the good word!  color is getting to be quite an issue now.......glad when I can finally get there  ;)

 

I think I know what your referring to Mark........that open area in the rack / podium.   well.......silly me......I had to mention it.   all this time,  I've been looking at the build from the starboard side....not paying any heed to the port side.   when I turned the boat around,  is when I noticed it.....but kind of shook it off since there was no platform there.   but then I began to think.......what if for some reason,  there was a problem,  and the only access to it was from this vantage point.   brrrrrrr.......cold chills and a watery drink!  so I decided to put something there.   I know that it's not in the plans......perhaps not even on the original vessel........but why not add it in anyway ;)

 

first things first.......let's drill the holes.  I have one more of those stanchions left.....shame to have it in inventory.......what would I use it for?

 

post-612-0-74587700-1421856802.jpg

 

then I cut and bent the railings for it

 

post-612-0-43052600-1421856835.jpg

 

I had to make a jig to drill the holes........sad to say I was 1/2 a MM off.......but I did a bit of trimming and I got it in place.   I'll just have to fill in the holes.

 

post-612-0-97513100-1421856955.jpg

 

post-612-0-63641200-1421856970.jpg

 

possibilities of probabilities........we'll just chalk it up to added detail.   gee......perhaps a platform there would be in order :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

since I was on a railing binge........I figured I trim the railings on the fore deck.   I had already cemented them together.   at the bow cap,  the lower railing was trimmed off and the top one was bent down,  according to the plans

 

post-612-0-60743000-1421857610.jpg

 

post-612-0-67134100-1421857639.jpg

 

 

then......the moment I have been waiting for........damn the exhaust fan,  the pilot house,  the rack / podium,  and the first section,  are getting primed!  :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Really coming together and looking good.  I like your additions.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...