pete48 Posted February 8, 2016 Author Share #181 Posted February 8, 2016 Today, I finished making the Spars ( Mast and Boom ) I started by making 2 new spreaders ( I did not like how the first ones turned out ) I then drilled the hole's for the standing rigging and finalized the sanding. Next I installed the spreaders and Gooseneck. Next will be to apply the first coat of varnish and to varnish the Hull ( 3rd coat ) Here are the results Engelmann, druxey, canoe21 and 13 others 16 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
Piet Posted February 9, 2016 Share #182 Posted February 9, 2016 Nice going Pete. Hope the round works wont warp on you later. To answer your question about me being a commercial pilot - negative to that. I didn't want to be a bus driver, - oh sorry Sjors, no offense intended. It was just too boring and I like working with my hands. I have flown planes from a single seat home build to the Boeing 757. The last 20 plus years in my aviation career was being an airworthiness safety inspector for the FAA and in that capacity learned to fly the "heavy iron" to check pilot proficiency and aircraft performance after major repairs and mods. Now I enjoy working with wood and build ships. Cheers, pete48, Elijah, mtaylor and 2 others 5 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum) Link to comment Share on other sites More sharing options...
Elijah Posted February 9, 2016 Share #183 Posted February 9, 2016 Nice masts and spars! Omega1234, Piet, mtaylor and 1 other 4 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society) Link to comment Share on other sites More sharing options...
pete48 Posted February 9, 2016 Author Share #184 Posted February 9, 2016 Thank You, Piet, I figured that you were involved with Aircraft in one way or another. FAA that's the big leagues. Thank You, Elijah, I am pleased with how the mast and boom turned out Best Regards, Pete SailorGreg, Mfelinger, Engelmann and 13 others 16 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
michael mott Posted February 9, 2016 Share #185 Posted February 9, 2016 Pete I am curious about the scale dimensions of your mast and boom. they look great By the way. Michael pete48, Omega1234, Elijah and 2 others 5 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
pete48 Posted February 10, 2016 Author Share #186 Posted February 10, 2016 Hi Michael, the Mast is 24' in length and started as 1/4" square ( before tapering ) the boom is 11' - 6".in length Best Regards, Pete Engelmann, Piet, JerryTodd and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
michael mott Posted February 10, 2016 Share #187 Posted February 10, 2016 Thanks Pete, the reason I asked is to compare it to the gaff rigged mast. at the step it is elliptical 5 inches on one axis an 4 1/2 on the other tapering to round at the peak at 3 1/2. I think a Gaff mast is a bit heavier than a Marconi one, but I could be out to lunch on that. michael mtaylor, Omega1234, Elijah and 2 others 5 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
pete48 Posted February 25, 2016 Author Share #188 Posted February 25, 2016 During this week, I have been sanding and varnishing the Hull, rub rails and toe rails. for the sanding. I started with 400 grit sandpaper and worked my way up to 800 grit sandpaper. I then would apply varnish wait 24 hours and re do the process. ( sanding and varnishing ) there are 6 coats of Epifanes varnish now on the Hull. I am pleased with how the varnish turned out, Next will be to complete varnishing the Spars ( mast and boom ) they currently both have 2 coats. Here are the results Omega1234, dgbot, Piet and 15 others 18 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
Elijah Posted February 25, 2016 Share #189 Posted February 25, 2016 Wow! That hull is very sleek! Wonderful job Pete! Omega1234, mtaylor, pete48 and 1 other 4 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society) Link to comment Share on other sites More sharing options...
Omega1234 Posted February 25, 2016 Share #190 Posted February 25, 2016 (edited) Hi PeteI don't know how you do it! But, no matter what, just keep doing it, because the finish on the hull is superb!!Congratulations are definitely in order, because she's looking beautiful.All the bestPatrick Edited February 26, 2016 by Omega1234 pete48, Elijah, mtaylor and 1 other 4 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora Link to comment Share on other sites More sharing options...
pete48 Posted February 26, 2016 Author Share #191 Posted February 26, 2016 Thank you, Elijah, I am very pleased with the finish, Epifanes makes a great product Thank you, Patrick, there is no trick, Just patience and taking your time ( lots of sanding ) She is easy on the eyes ( lol ) Best Regards, Pete mtaylor, JerryTodd, canoe21 and 9 others 12 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
mtaylor Posted February 26, 2016 Share #192 Posted February 26, 2016 Sweet, Pete. Elijah, Piet, Omega1234 and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Piet Posted February 26, 2016 Share #193 Posted February 26, 2016 Wonderful Pete, she's like a sparkling jewel! Cheers, pete48, Elijah, mtaylor and 1 other 4 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum) Link to comment Share on other sites More sharing options...
pete48 Posted February 26, 2016 Author Share #194 Posted February 26, 2016 Thank you, Mark, I appreciate it Thank you, Piet, She has a nice shine Best Regards, Pete yvesvidal, canoe21, Jond and 9 others 12 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted February 28, 2016 Author Share #195 Posted February 28, 2016 Today, After another coat of Varnish was applied to the Spars ( Mast and Boom ) I turned my attention to installing the Cockpit coamings. I started by finalizing the fit. I then made the brace that fits between the Coamings on the forward bulkhead. Next, I made the forward Coaming block, I ( once satisfied with the fit ) I installed the coamings brace and block. I then stained the block and brace cherry red. Next will be to varnish the Cockpit Coamings. Here are the results muratx, canoe21, Engelmann and 12 others 15 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
michael mott Posted February 28, 2016 Share #196 Posted February 28, 2016 A really beautiful job Pete, I hope that my one turns out as nicely. Michael Piet, Elijah, Omega1234 and 2 others 5 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
Jim Lad Posted February 28, 2016 Share #197 Posted February 28, 2016 I seem to have missed a bit, Pete. She really is looking very special. John Piet, pete48, mtaylor and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Elijah Posted February 28, 2016 Share #198 Posted February 28, 2016 She's really coming along! Piet, pete48, mtaylor and 1 other 4 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society) Link to comment Share on other sites More sharing options...
Mirabell61 Posted February 28, 2016 Share #199 Posted February 28, 2016 A beautiful build Pete Nils mtaylor, Piet, Omega1234 and 2 others 5 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
captainbob Posted February 28, 2016 Share #200 Posted February 28, 2016 She's looking lovely. Bob mtaylor, pete48, Piet and 1 other 4 Quote Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray Link to comment Share on other sites More sharing options...
pete48 Posted February 28, 2016 Author Share #201 Posted February 28, 2016 Thank You, Michael, I am sure that yours will look Amazing ( it already does ) Thank You, John, She is almost ready to be fitted out Thank You, Elijah, I am just about ready to round the top mark and head for the final leg of this build Thank You, Nils, I appreciate the compliment Thank You, Cap'n'Bob, she's getting there And thanks to everyone that hit the like button Best Regards, Pete canoe21, gerty, dvm27 and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted March 1, 2016 Author Share #202 Posted March 1, 2016 Today, I started by sanding the Coamings, starting with 400 grit sandpaper and working my way up to 800 grit sandpaper. I then applied the third coat of varnish. IWith 4 coats of varnish on the Mast and Boom, I turned my attention to finishing the Mast by painting the Masthead and Spreaders white. Next will be to finish the Cockpit coamings and start making the Sails. Here are the results mtaylor, Timothy Wood, canoe21 and 6 others 9 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
gerty Posted March 1, 2016 Share #203 Posted March 1, 2016 Beautiful model Pete ! Nice work. Piet, mtaylor, Elijah and 2 others 5 Quote Current Build: Willie L. Bennett - Model Shipways Future Interests: Friendship Sloop - BlueJacket Ship Crafters Cape Cod Catboat - BlueJacket Ship Crafters Link to comment Share on other sites More sharing options...
Piet Posted March 1, 2016 Share #204 Posted March 1, 2016 Just catching up. Gorgeous looking jewel Pete. Cheers, Elijah, mtaylor, Omega1234 and 1 other 4 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum) Link to comment Share on other sites More sharing options...
Jim Lad Posted March 1, 2016 Share #205 Posted March 1, 2016 I like the white trim on the mast, Pete. She's really going to look 'the bees knees' when she's finished. John Piet, mtaylor, pete48 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
pete48 Posted March 1, 2016 Author Share #206 Posted March 1, 2016 Thank You, Lawrence, Welcome aboard, I will be opening up the Sail loft and she will carry a Main and working Jib, I have not decided whether it will be self-tailing or not. BTW beautiful job on your African Queen Thank You, Gerty, Thank You, Piet, I think she may be the Crown Jewel of my fleet Thank You, John, I originally saw the white on the Spreaders and Masthead in a WoodenBoat Article, " the bees knees" thats great. I hope she finishes strong Best Regards, Pete yvesvidal, canoe21, Jack12477 and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted March 3, 2016 Author Share #207 Posted March 3, 2016 Thank You, Lawrence, I have been working on the Sails this week, Hopefully I will have a set that is presentable today Best Regards, Pete Piet, Elijah, michael mott and 1 other 4 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted March 3, 2016 Author Share #208 Posted March 3, 2016 After a busy week ( wich still continues ) I have managed to squeeze in a few hours here and there in the Sail Loft. Ironically, Out of all the Boats I have built, Only the Buzzards Bay 14 have I made Sails for every time. ( This was pointed out to me by Kate ) After many failed attempts, I am pleased with the Sail set for this boat. ( Main and Jib ) I thought I would show the set from the previous Builds. ( # 1 is the Boat in the water) Here are the results yvesvidal, Omega1234, mtaylor and 8 others 11 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
Piet Posted March 4, 2016 Share #209 Posted March 4, 2016 What a beautiful sight Pete, A Herreshoff in the water. Very nice set of sails! Cheers, mtaylor, Elijah, pete48 and 1 other 4 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum) Link to comment Share on other sites More sharing options...
dgbot Posted March 4, 2016 Share #210 Posted March 4, 2016 What material are you using for your sails silkspan or linen? David B pete48, Piet, Elijah and 2 others 5 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.