Edwardkenway
-
Posts
3,029 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Edwardkenway
-
Bell UH-1H Huey By lmagna - Dragon - 1/35 - PLASTIC
Edwardkenway replied to lmagna's topic in Non-ship/categorised builds
I agree very nice work. I like the surgical tape seat belt solution -
Thanks for dropping by everyone, this was supposed to be another kit build but lockdown has held up delivery so I found these card models online, so depending on how much longer I'm unable to go to work I've got enough of these to keep me going. So after a quick start I've slowed up making the wheels and suspension for the tracks. To be honest I'm finding it slightly difficult to cut holes neatly, but I get there. I've got 16 more wheels to make then I'll move on to the tracks. cheers 😊👍
- 11 replies
-
- 11
-
-
To stop myself going stir crazy I've downloaded some free card model templates from Paper-replika.com. Watching Jack do his magic with the armour kits he has, I thought I would have a go at this Sherman got the main body done and now it's on to the tracks and turret As I said these are free, just need ink and some 220gsm card. Cheers
- 11 replies
-
- 12
-
-
Great log EG and the finished product is excellent, the generator looks great, as does the tractor unit and AA gun😃😃👍
-
AH64 A Helicopter by kpnuts - Academy - 1/48 - PLASTIC
Edwardkenway replied to kpnuts's topic in Non-ship/categorised builds
Despite the kits faults, you are making a nice job of it!! -
Good job, very nice looking little vessel 👍😁
-
😲!!!!???? Nooo!
-
Now I did know that, my granddaughter and I used it with red food colouring to make an erupting volcano from gaffer tape and an eggcup!
-
Quite impressive reactions!!. I didn't know that!! Got to make sure to use one or the other to strip paint.
-
I'm in, bit late tho'😊
-
Hi, I went to my local library and basically printed them off at 75% of the 1:48 templates apart from the deck, profile and centre board which I had printed at John E Wright in Derby, again at 75%. I chose this scale as I plan to fully rig Triton. I hope this helps. I'll look forward to seeing your Triton builds. I will add I thoroughly enjoyed the cross section but if I did another it would be 1:48. Thanks for looking in. Cheers
-
Looking good Bossman
-
Lovely paint job, as OC said I like the camo scheme.
-
Looking good so far, I would have to agree with the above comments about masking off the keel and stem, I didn't on Sherbourne although I did paint it.
-
Thankyou, gentlemen. I am relieved to have got the majority of the fairing done although there is a bit more to do at the bow!
-
Colour is even better with the gloss coat and lighting, top notch 😁
-
The hull has been roughly faired and the gunport framing done, the frames for the stern were cut and placed(not glued). I traced the curve of the stern from the deck plans and transferred it to a piece of scrap which was the cut to shape, this was used as I fitted the stern parts to make sure that I had the correct curve. There was some more fairing done and hopefully I'm about there. I have to make the bollards and the stern filler pieces. Thanks for dropping by and the likes. Cheers
-
Happy birthday Craig
-
Absolutely sublime workmanship, just beautiful!!
-
Welcome and hello!!
-
Nice work there Jack, looking forward to seeing how you are displaying it
Our Emblem ®
