Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

druxey

NRG Member
 View Profile  See their activity

  • Posts

    13,099

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    And I say: "Chacun à son gôut!"
  2. druxey
    What a garage sale this will be! I wish I was in the neighbourhood. I could use a few feet of spring steel wire, but not miles of it.... Good luck sifting, sorting and reducing. I'm sure a few long-forgotten items will surface in the process.
  3. druxey
    The only reliable way to stain a wale is to do this before adding any other planking. It's all too easy to spread a little too much of the joy! To keep the dye off the stem, sanding sealer will seal the grain, plus Magic Tape masking rather than masking tape should do the trick. Some wood species do not take up dye evenly: there is nothing you can do about that, other than paint.
  4. druxey
    Alla and Jerry: you are both correct. The indirect run of the breeching both added friction during recoil as well as prevented 'bucking' of the piece.
  5. druxey
    Thanks for your explanation and positive attitude in overcoming health problems. Hopefully the discussion here will continue to exercise your mind! Certainly adding water to an already complex problem makes things even more interesting. It will be interesting to read your conclusions, Hellmut. Mit grusse
  6. druxey
    Impressive for a first scratch build! I like the fact that you are following the prototype ship as closely as you can.
  7. druxey
    I understand part of your dissertation, at least! The fact that you are examining a dynamic system, where the relative positions of the sheaves keep changing, means you are chasing a chimera that is shape-shifting. Thank goodness for computer analysis! I'd be concerned about the sheave groove depth increasing friction. A shallower groove with a wider rim on each side will keep the line clear of the block sides. What do you think? You mention health issues, Hellmut. I hope that these can be resolved or, if not, ameliorated. Mit grusse
  8. druxey
    Oh, my. I'm sorry to read about your accident, John. Every best wish for a full recovery. Be patient with yourself!
  9. druxey
    Sweet! Many happy hours for you both aboard her.
  10. druxey
    Well done, Mobbsie. I hope the museum is truly appreciative of your work.
  11. druxey
    Very, very nicely done, Johann!
  12. druxey
    Interesting viewpoint! I enjoy watching your progress, Magnus.
  13. druxey
    Well done, Mark. Another hurdle cleared.
  14. druxey
    It's a very clever idea. (Nice looking model, too!) That looks quite convincing: I assume this is at 1:48 scale?
  15. druxey
    Thank you, Team Notebook!
  16. druxey
    Some excellent information here. I particularly like the descriptions of painting a ship, circa 1804 (pages 27 & 28). Thanks, Wayne!
  17. druxey
    I'm sure that there were a lot of transitional rigs. You are safe there!
  18. druxey
    Heh, heh. And tomorrow, the world! Actually, I'd need to learn a suitable CAD program first before scorching any wood. Sorry about your scroll saw, E&T. I hope you got good mileage out of it before it quit.
  19. druxey
    Nice! I like the run of the floor fillers.
  20. druxey
    Before one has rigged a model, the task seems utterly daunting. This is Stage 1, where you are at. Take a deep breath and get yourself centered. Rigging is essentially a logical exercise. This should, as a software engineer, reassure you. Every line has a purpose and function, even if this is not immediately apparent. Begin with the standing rigging, lower first, working from forward to aft. If in doubt, there is plenty of help available on this forum. We all began our rigging experience at Stage 1 (see above).
  21. druxey
    There is a new technique for making sails described in the revised TFFM, Volume IV. (The relevant information is also available as a separate booklet form SeaWatch Books.) The results can be seen on the 'workshops' page of Admiralty Models. You can see for yourself how this looks.
  22. druxey
    The mizzen topgallant mast and yard was not usually fitted to smaller rates until the 1790's. This was also apparently true of driver booms. The updated masting plan indicates this.
  23. druxey
    That is thinking ahead!
  24. druxey
    Nice use of the free library technology! Where do you live? I'll be right over! Everything on the hull lines up beautifully.
  25. druxey
    I like this story, Wefalck! Looking forward to the next instalment....

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...