Jump to content

USF Confederacy 1778 by WalrusGuy - Model Shipways - 1:64


Recommended Posts

Link to comment
Share on other sites

Thank you, Moonbug 😀

 

Both sides of the hull and now drilled and ready to be treenailed:

20211026_221258.thumb.jpg.ca103b1f0f2dd414fa5e2d74acb1bda1.jpg

20211026_221224.thumb.jpg.dfa465b77f6f7160f68d16f9d2a0756e.jpg

20211026_221157.thumb.jpg.298f9f1f4c658043f3fcb3ac13df920a.jpg

20211026_221401.thumb.jpg.f2804a1f7ae9905dabd2b1b5bf5eaf92.jpg

And so it begins 😁

20211026_221552.thumb.jpg.7ed3ec47a1ef28f053650f858976d89b.jpg

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

  • 2 weeks later...

After many hours, I finally finished treenailing the planks! Well, I will need to do one more round for the channel wales, but right now majority of the treenailing is done. 

 

After completing one side, I learnt it is better to randomize treenailing the last bit of the bamboo skewer so the transition between two bamboo skewers is not very apparent. Even though the colors of the skewers match, the cross-section appearance is slightly different. I hope once I apply the Tung oil finish, the transitions between the skewers do not show much. 

 

Here are some snapshots I took of the WIP:

20211028_222016.thumb.jpg.2f2c796f470e03f4bf7e89eced9a2b0d.jpg

20211106_002533.thumb.jpg.4763c1f8c6bfd9827c5a94ad7a37a5b3.jpg

Applying a bit of water shows how they may look after applying the Tung oil. Here you can see the clear divisional line where I began using a new bamboo strip (between the 2nd vs 3rd columns of where I applied the water). Lesson learnt! Next time I will be sure to randomize the the treenails at the transition area. I did that for the portside area and I can not see any clear transition lines.

20211030_205441.thumb.jpg.b5410cf5a9a2136ada5cde307282d5b3.jpg

After treenailing, I sanded all the planks with medium then fine sandpaper. Here is how she looks right now:

20211106_164636.thumb.jpg.e596c1c6c33c5ede45d7be1e0a3ac3a8.jpg

20211106_164655.thumb.jpg.24728f3fe2bc913a64ca90dcf825c3b7.jpg

20211106_164709.thumb.jpg.8a3156f8e408b26e25d6af66e6b97077.jpg

20211106_164739.thumb.jpg.cbd3a97f666fe45f4e396a4b3ce512e0.jpg

20211106_164853.thumb.jpg.7deaa082819209a02d1a602c78dfb070.jpg

20211106_164905.thumb.jpg.58b6f639eb01f5ed2fdf785bd20ba941.jpg

I am now thinking of starting to plank the lower hull area. I bought some 1/16" basswood sheets so I can cut the planks to shape instead of edge-bending. I may also start installing the channel wales but let's see!

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Link to comment
Share on other sites

13 hours ago, Moonbug said:

Beautiful planking job. 

Thank you Moonbug! And thanks all for the likes as well 🙂 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

In case I forgot to mention in my previous posts, I am following David Antscherl's guide for planking below the hull which I got from http://www.admiraltymodels.com/Tips.html:

 

Planking_primer.pdf

 

I finished lining out the hull with some black thread, dividing it into three bands (I chose three since I calculated I will need 33 planks across the hull, which divides nicely by 3).

 

Here are a bunch of photos showing different angles of hull. Please let me know if you guys see any issue with threads not flowing nicely, it will be much easier to fix the threads now than after when I start planking 😅

20211108_222432.thumb.jpg.612638dd928082541f6022580dfb1eb7.jpg

20211108_222444.thumb.jpg.7eaf316af8afb35435db5131fbf26266.jpg

20211108_222451.thumb.jpg.80028b2a3a11a8c436b08f22d5fc3dd5.jpg

20211108_222510.thumb.jpg.df7197c1122bd8fbab45b7204b34c2f9.jpg

20211108_222531.thumb.jpg.459d75e25f1441d90357189470df0f37.jpg

20211108_222627.thumb.jpg.b8a468a0c8cee8b372f0f06aa932a373.jpg

20211108_222638.thumb.jpg.756e5a14738c96ef4580b8da706bdc5e.jpg

20211108_222653.thumb.jpg.8c1f2920bb20e2ce39c2e4d5fc6e3470.jpg

20211108_222701.thumb.jpg.5af8bc84618ea5ec54a2a691693d39f1.jpg

20211108_222746.thumb.jpg.6a6553671d1958dd09485358b6f67715.jpg

20211108_222814.thumb.jpg.bf8dd17614138431fb62035ca23020a8.jpg

20211108_222821.thumb.jpg.f4205d9f8813dca8f78ca00841ccf8be.jpg

20211108_222831.thumb.jpg.0ecef8cb9d46c9ac77d9009869baba27.jpg

20211108_222839.thumb.jpg.6039620ca87ec26baf636b987e6f47f8.jpg

I will probably wait for a bit to work up the nerve to start the planking process.... Very very nervous on how it will turn out!

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Looking at the last photograph the 7th bulkhead from the bow looks a little bit low as the line seems to dip a little there.

 

it is funny how some things show up in just one view.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

13 hours ago, WalrusGuy said:

I am following David Antscherl's guide for planking

 

I'm curious about the differences are between the Antscherl method of planking and Chuck's method of planking? The two methods appear to be similar in lining off the hull but have differences when it comes to shaping and bending the plank. I'm far from being all that knowledgeable about planking but it seems that the Antscherl method has you spile every plank as necessary without any edge bending whereas Chuck's method uses heat to edge bend as necessary. Do you know if this is correct when comparing the two methods? 

Bob Garcia

"Measure once, cuss twice!"

 

Current Builds: 

Hms Brig-Sloop Flirt 1782 - Vanguard Models

Pen Duick - Artesania Latina 1:28

 

Completed: Medway Longboat 1742 - Syren Ship Model Co. 

Member of the Nautical Research Guild

 

 

 

Link to comment
Share on other sites

3 hours ago, michael mott said:

Looking at the last photograph the 7th bulkhead from the bow looks a little bit low as the line seems to dip a little there.

 

it is funny how some things show up in just one view.

 

Michael

Thank you for pointing that out, Michael. I did not catch that! I found that the reason the string does not flow nicely there is because the 7th bulkhead is actually slightly higher than all other ones (about 1 mm), so I will rectify this before continuing by gluing some thin wood pieces on it. Thanks again, I would have completely missed that!

 

4 minutes ago, BobG said:

I'm curious about the differences are between the Antscherl method of planking and Chuck's method of planking? The two methods appear to be similar in lining off the hull but have differences when it comes to shaping and bending the plank. I'm far from being all that knowledgeable about planking but it seems that the Antscherl method has you spile every plank as necessary without any edge bending whereas Chuck's method uses heat to edge bend as necessary. Do you know if this is correct when comparing the two methods? 

Hi Bob, yes I think that is the main difference. Since I am using basswood I am not sure if I can bend in 2 dimensions (edgewise and lengthwise) without the plank cracking (if I soak/steam it after edge-bending then the strip will get back to its original shape). I think Chuck's method works best for wood species like Alaskan yellow cedar, boxwood (and all the good stuff 😄) since you can bend it lengthwise easily when it is dry after being edge-bent, but I could be wrong. So I plan to use Antscherl's method for the bow and stern area by spiling and cutting the planks from a basswood sheet, and using the milled strips for everything else.

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

I agree that main difference between Chuck and Antscherl methods are edge bending each plank versus cutting each plank to fit the required edge curvature.  I've worked with basswood a lot and it's soft and easily shaped.  It edge bends easily and I had no trouble on the small long boat.  I thought I would, but turns out there were no problems.  It certainly splits along the grain when cutting (like for taper), but no problem steaming an edge bend.  I'm guessing you'll have more problems with basswood splitting when cutting the curved pieces.  

 

I know from experience basswood splits super easy when cutting small parts or details.  It will also split easily when bending unless you heat/steam it.  Carving would be very difficult.  On bulkheads or similar parts with notches, slots or sharp curves, I've had to laminate two thinner sheets of basswood together cross grain, and then cut the parts from that to avoid splitting.

 

I suspect it's one of those choices that's up to the modeler.  Cutting each plank to fit is probably the way they did it on full sized ships so might be more "accurate", but we have a choice on models since we are working with small strips of wood.  I tend to be impatient, and edge bending seems easier to me, but that's just me.  Others may find cutting each piece to fit easier.  One thing about cutting each piece to fit, you would be able to minimize drop planks and stealers, and seems like it would make fitting the last plank easier.

 

David Salguero

Wichita, Kansas

 

Current Build:  Royal Yacht, Duchess of Kingston - Vanguard Models

Completed:  US Syren - Model Shipways

On Deck:  HM Cheerful - Syren Ship Models

Link to comment
Share on other sites

I made some more tweaks to the strings after turning the hull the right way up. And from David's help, I managed fixed the areas at the stern. Here are some pictures of the lining out stage before I dive into planking:

20211110_134847.thumb.jpg.0cead21ec7242e5cbbeeeaf1313707ab.jpg

20211110_134854.thumb.jpg.a452b1556b72a5aca76b0f34a508d13a.jpg

20211110_134919.thumb.jpg.4e2f6c391592dcba547dab9787e5e8d9.jpg

20211110_134935.thumb.jpg.b8c495ab4637ca3d2ce3469eef332107.jpg

20211110_135034.thumb.jpg.f8c31cc4a8fe89cf4a91b4dfb622bc0c.jpg

20211110_135044.thumb.jpg.a4041e3b662147bb5d24da3c0708f15a.jpg

20211110_135333.thumb.jpg.db66ca3116f308d2d39deb2858378253.jpg

20211110_135401.thumb.jpg.ee657f1ea9d93671be591f1e81b8aaec.jpg

20211110_135418.thumb.jpg.0721512c1f7283d8dadd7b5329ff3f23.jpg

20211110_135346.thumb.jpg.57dbe8bbe1174ad0a63c23db92f776dd.jpg

20211110_135356.thumb.jpg.8f5386509a878c03bf833eb6c9b8896a.jpg

20211110_135443.thumb.jpg.a396dd9488608c21bc0047db49599eb6.jpg

20211110_135505.thumb.jpg.1cd401c4c17d9484e75e0522df3cb63e.jpg

I think I may start planking soon now, just very nervous of the overall process. Hopefully I can pull it off! But please do let me know if you guys spot any other areas of concern 🙂 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

3 minutes ago, desalgu said:

I agree that main difference between Chuck and Antscherl methods are edge bending each plank versus cutting each plank to fit the required edge curvature.  I've worked with basswood a lot and it's soft and easily shaped.  It edge bends easily and I had no trouble on the small long boat.  I thought I would, but turns out there were no problems.  It certainly splits along the grain when cutting (like for taper), but no problem steaming an edge bend.  I'm guessing you'll have more problems with basswood splitting when cutting the curved pieces.  

 

I know from experience basswood splits super easy when cutting small parts or details.  It will also split easily when bending unless you heat/steam it.  Carving would be very difficult.  On bulkheads or similar parts with notches, slots or sharp curves, I've had to laminate two thinner sheets of basswood together cross grain, and then cut the parts from that to avoid splitting.

 

I suspect it's one of those choices that's up to the modeler.  Cutting each plank to fit is probably the way they did it on full sized ships so might be more "accurate", but we have a choice on models since we are working with small strips of wood.  I tend to be impatient, and edge bending seems easier to me, but that's just me.  Others may find cutting each piece to fit easier.  One thing about cutting each piece to fit, you would be able to minimize drop planks and stealers, and seems like it would make fitting the last plank easier.

 

 

3 minutes ago, desalgu said:

PS...I'm super impressed with your treenailing!!

Thank you for the compliments, David! Yes I agree about basswood having a tendency of splitting. Because of that, I am forced to work more slowly and deliberately to not damage the wood when working with small pieces. I am thinking to stop using basswood for future projects and use other species instead for an easier time 😉

 

I also found another difference between Chuck's and Antscherl's method is that Chuck uses tape to divide the bands, whereas Antscherl uses string. I found string to be easy to glue and tweak afterwards with a little bit of water.

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

It's all about the 5 P's - Preplanning prevents **** poor performance.  I know the feeling of anxiety right before you start planking.  Just remember - go with the flow - even though you've got it all planned out, there are always imperfections and variations.  Don;'t sweat it - you're going to do great! 

Link to comment
Share on other sites

On 11/10/2021 at 4:52 PM, VTHokiEE said:

Wow, looking really nice! (Also great pictures)

 

On 11/10/2021 at 10:24 PM, Moonbug said:

It's all about the 5 P's - Preplanning prevents **** poor performance.  I know the feeling of anxiety right before you start planking.  Just remember - go with the flow - even though you've got it all planned out, there are always imperfections and variations.  Don;'t sweat it - you're going to do great! 

Thank you for the words of encouragement, Tim and Bug! I made some more changes to the bow lining as shown here:

 

20211110_234904.thumb.jpg.dd8578585e909de3d4c8f69f1d12633e.jpg

I felt like the top layer was a bit too cramped up before and now the new layout is a bit more spacier.

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

I made a start on the planking, and I am going slow and steady (well, I think and hope I am!). All the planks at the bow (and some at the stern) will be cut from from a basswood sheet. I'll use the supplied planks for the intermediate sections. I am gluing in a scrap wood piece (that overlaps underneath planks from the previous row) when a plank ends between bulkheads as shown here:

image.png.89cae31fb8c4e713a18e6d88700502b4.png

20211111_152541.thumb.jpg.7e4d7d6b8d36b9b3ab944f283d746354.jpg

I'll probably post more pictures when each band is completed. Again, I may space this part of the build with gluing and treenailing the channel wales.

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

I never knew how long each strake of planking would take! Almost all planks are different in shape or need to be tapered a certain way. Even some in the middle right before the stern section need to be tapered slightly. I've been using the mini planer to taper planks easily. 

 

I am about halfway through the first band. Thought I'd share this small bit of progress as I carry on:

20211117_162928.thumb.jpg.86b08ca52ee8e2f4107e7552b5653426.jpg

Here is a piece where the inner part has been cut to shape, and the outer curve will be cut out next:

20211117_162942.thumb.jpg.78edbe8eacdabde642e33bbd3d650b0c.jpg

20211115_234742.thumb.jpg.9e12dd450cb94b741dee907fb29884d8.jpg

20211114_210054.thumb.jpg.c0d1cbc89c2fffb54bb1d3805421e70a.jpg

I guess each band would take me a couple weeks to do. But I am in no rush to finish up, just going by it slowly and steadily.

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Thanks, Matt! I find shaping each plank a bit like meditating after doing it a while 😄

 

Also, I forgot to mention, I've been using a technique taught to me by @michael mott for bending planks. Instead of soaking wood to bend planks, I've been wrapping the planks with a damp napkin and microwaving for about 20-30 sec. This saves a lot of time! 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

On 11/17/2021 at 7:10 PM, WalrusGuy said:

I've been wrapping the planks with a damp napkin and microwaving for about 20-30 sec.

 

    Interestingly - this is also how I cook bacon.  Coincidence...?   I think not.  B)

Link to comment
Share on other sites

Thank you all for the encouraging comments, and also for the likes!

 

The first band is now planked and I lightly sanded it:

20211126_104238.thumb.jpg.1f1254c78412df4ca264548e9b017c36.jpg

20211126_104252.thumb.jpg.3bc381f3e2fbb4729abbd28488006935.jpg

20211126_104257.thumb.jpg.879df6b1c811a9b9c648e3bdfd71dadc.jpg

20211126_104307.thumb.jpg.569511226edf16dd5c7dd3cc57280a6f.jpg

20211126_104439.thumb.jpg.8743d3f009334d39547145b3d1239691.jpg

20211126_104500.thumb.jpg.da73ae34c202a6ce172e2797e23242f3.jpg

20211126_104415.thumb.jpg.7c973aad42cd479405205982ed571e21.jpg

I still need to smoothen the edge some more before moving on to the next band:

20211126_104524.thumb.jpg.7b4d049e4af9becf73e6bacafed3f80b.jpg

And with the ship upright:

20211126_104728.thumb.jpg.fd9ec93fb7b7aaf9d6be506f9e8847af.jpg

20211126_104739.thumb.jpg.8a9efeda55cd85b8abc42edb8fb4db3a.jpg

20211126_104856.thumb.jpg.47a05b519fb369c3d92f4641d8a07121.jpg

20211126_104959.thumb.jpg.0b1830eeb9314eae5ed190df1fe41b4e.jpg

20211126_105006.thumb.jpg.e63a8b012433b584be36a8a27bc239c2.jpg

From this photo I just noticed, I also need to fix up the string on the portside (2nd bulkhead from the stern): 

20211126_105029.thumb.jpg.696d0d4500346c4760a2c970ab0254d6.jpg

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

4 hours ago, abelson said:

Looks like nice symmetry.

Thank you, Steven. 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Not much progress since my last update. Took a bit of a break after finishing the lower band.

 

Here is where I am at right now:

20211202_192341.thumb.jpg.ee1d2d68137396309117e6e0fd24b22d.jpg

20211202_192401.thumb.jpg.7a90a68e4ce73308b91322d3b07c0236.jpg

I followed Chuck's Winchelsea where he added a drop plank right below the wales. This will probably be my only drop plank. 

 

For those with a keen eye, you may have realized I replaced the topmost plank. It did not follow the same planking layout as the first lowermost band, so I decided to redo it. That way, I could also work in the drop plank as well.

 

And I had to mark out the 11 planks on the middle bulkhead for the middle band so that I can see where the butt joints will line up. I hope I calculated where the top plank butt joints are accurately! I did it 5 times to make sure I did not make a mistake! 😅 

Guess I will know for sure if I counted them right once I finish up the planking...

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

11 hours ago, Gahm said:

Your planking looks really good!

 

Thomas

Thank you, Thomas 🙂 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

  • 2 weeks later...

The uppermost band is now planked. I found this part to be much more trickier and challenging than the lower band. I'm not 100% happy with how the planking turned out at the bow where they meet the stem. It's not as smooth or symmetric as I'd like. It looks ok with the ship upside down, but looks a bit weird with it the right way up. No idea why this it is like that 😅. Maybe I just need to sand a bit more (I just roughly sanded it for now). 

 

Also, similar to the bow, all the planks at the stern had to be cut out from a sheet since the planks needed to be curved in shape. So each strake took a couple of days to do.

 

Here are some photos:

image.png.1a5b7f9ede2c33e83e0ec13892adb1a6.png

20211216_111924.thumb.jpg.4f9570ab7716198ee5fff7f62c744e5d.jpg

20211216_111950.thumb.jpg.0450f3a9c0f9344480bef7f7865c189a.jpg

20211216_112018.thumb.jpg.bd953b3e96d49beaa40c51e83dd6ff6b.jpg

20211216_112025.thumb.jpg.0407e101aa4f17c422e1c34dbc60c088.jpg

20211216_112040.thumb.jpg.b22cd037dd5bd6a787a6b964926f284a.jpg

And with the ship the right way up:

20211216_112427.thumb.jpg.747f05b50e0876ce107c66e3722c2fc8.jpg

20211216_112448.thumb.jpg.ff9836195a90b2933079b3b14ffce35b.jpg

20211216_112455.thumb.jpg.edd5bb96221f2447857eb37cb2439fa6.jpg

20211216_112511.thumb.jpg.ac3317d6693842585021140212920ce8.jpg

20211216_112553.thumb.jpg.f56008bce2d80d244f63d3901122754c.jpg

20211216_112600.thumb.jpg.dac7d00fdce37adece6a81ff1df5a29c.jpg

20211216_112607.thumb.jpg.ddecbfe59fc8dcc199204056130c6e9c.jpg

Clamping the wood at the stern was also tricky. I had to think of different ways to do this:

image.png.fd73826b50bb1b1012e9ad0518837cd4.png

image.png.838384b3ab8d39e36790008f834f598a.png

I have a feeling the middle band will be more trickier since I will be slowly running out of space for the clamps.

Edited by WalrusGuy

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...