popeye the sailor Posted June 30, 2021 #31 Posted June 30, 2021 looking really good Alan........the detail on these small models is amazing Egilman, Old Collingwood, Edwardkenway and 1 other 4 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
king derelict Posted June 30, 2021 Author #32 Posted June 30, 2021 15 hours ago, Backer said: Nice work Alan. If the sprocket teeth dont fit. I usually cheat 😇 and cut some of them off. Mostly on older models with rubber tracks as on this Airfix Centurion sprockets (link to buildlog in signature) Thanks Patrick. I shaved a couple of the teeth and there was then enough room in the track links to accommodate the misalignment. I need to get in the habit of checking stuff like this before reaching for the glue. Alan CDW, Old Collingwood, Baker and 4 others 7 Quote
king derelict Posted June 30, 2021 Author #33 Posted June 30, 2021 14 hours ago, Egilman said: I've cut off sprocket teeth as well, but I hit on an easier solution, I cut off the alignment tabs or square locators and align them with a pair of machinists angles so the blade is vertical... putting a sprocket tooth against the square blade on each side of the sprocket forces the correct alignment and using two on opposite sides forces the two halves to be concentric... It's a bit more work, but eliminates sprocket alignment issues in all cases without cutting off teeth...... You guys do beautiful work..... Thanks Egilman I should have checked the dry fit and registered teh misalignment before gluing. Your solution would have then been an elegant fix. As it was I stumbled through it. I do need to learn that the kit manufacturer isn't always delivering a perfect kit. Flyhawk is so good generally that I get lulled into a false sense of security. Alan popeye the sailor, Egilman, lmagna and 5 others 8 Quote
king derelict Posted June 30, 2021 Author #34 Posted June 30, 2021 4 hours ago, popeye the sailor said: looking really good Alan........the detail on these small models is amazing Thank you for the kind comment Popeye. This is a great kit and I have enjoyed it a lot. Flyhawk put a lot of detail into a tiny tank. Alan mtaylor, Egilman, Old Collingwood and 5 others 8 Quote
king derelict Posted June 30, 2021 Author #35 Posted June 30, 2021 The major task of the day was to complete the tracks by using the single links to bridge round the drive sprocket and the rear wheel. The detail of the single tracks is very impressive and they assemble very nicely on a flat surface. Unfortunately I found them very difficult to build up around the curvature of the wheel. The sprocket wasn't so bad because the teeth held the link in place and ensured the spacing. The rear wheel was more difficult ; the links didn't seem to like the radius and wouldn't lay up next to each other. I tried assembly a section on the bench and folding it around the wheel while the glue was soft but it still fell apart once the radius was tightened. Eventually I laid one link at a time and let the glue set before adding the next and got a reasonable result. It certainly looks better than the Airfix Churchill I built about 55 years ago. It had the elasticated tracks that you were supposed to fuse together with a hot knife blade. The track guards were installed and the details added. I put the turret in place - its a lot safer there; with the PE grab handles there are very few places that you can hold the turret. I put a couple of very thin black washes on to bring out the wheel details and panel lines. Next is the weathering. From Patricks notes this was mainly a training asset and I can't imagine any Prussian training establishment allowing their equipment to get too squalid. I do want to try the Mig Oilbrushers and see what i can do though. Thanks for looking Alan CDW, Egilman, Edwardkenway and 5 others 8 Quote
king derelict Posted July 1, 2021 Author #36 Posted July 1, 2021 And I forgot to add the photos to last nights update. My apologies Now off to do some experiments with the Oilbrushers Alan mtaylor, Edwardkenway, marktiedens and 7 others 10 Quote
Old Collingwood Posted July 1, 2021 #37 Posted July 1, 2021 Look at the detail on that - superb. OC. Egilman, popeye the sailor, mtaylor and 3 others 5 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
mtaylor Posted July 1, 2021 #38 Posted July 1, 2021 Looks great from here, Alan. I hope the weathering goes well. Egilman, Old Collingwood, Edwardkenway and 3 others 6 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
CDW Posted July 1, 2021 #39 Posted July 1, 2021 If I did not know it’s 1:72 scale, would think it’s 1:35 for sure. Excellent! mtaylor, king derelict, Egilman and 4 others 6 1 Quote Completed Projects: USS Fletcher 1:144 Scharnhorst 1:350 USS Independence LCS-2 1:350 1:32 J7W1 Shinden Interceptor/Fighter Fairey Swordfish Mk. II 1:48 Harbor Tug Box Scale Albatros D.V 1:32 Ala-Kart 1:25 Ferrari 250 GT California Spyder 1:24 S-100 Schnellboot 1:72 Mercury Capsule and Atlas Booster BR-52 Steam Locomotive 1:35 Triumph 3 HW Motorcycle 1:9 Scale F-16XL-2 Experimental Fighter Bomber 1:48 Rafale 1:48 F-15E Strike Eagle 1:48 Petlyakov PE-2 Soviet Dive Bomber 1:48 TBM3 Avenger 1:32 1931 Cadillac 1:25 Scammell Pioneer SV2S Heavy Breakdown Tractor 1:35 M-50 Israeli Sherman 1:35 Military Wrecker 1:32 Delahaye 135 1:24 Toyota Sard Supra GT 1:24 Enzo Ferrari 1:24 1970 Baldwin Motion Camaro 1:25 1966 Ford Galaxie 500 Stock Car 1:25 American LaFrance Eagle Fire Pumper 1:25 1940 Ford Standard Coupe 1:25 VolksWagen Dragster/Dune Buggy/Street Rod 1:25 Kawasaki Ninja H2 Carbon 1:12 Porsche GT-1 Evo 1:24 Scharnhorst 1940 1:700 IJN Akitsushima Seaplane Tender 1:700 HMS Hood 1941 1:700 Prinz Eugen 1942 1:700
king derelict Posted July 2, 2021 Author #40 Posted July 2, 2021 7 hours ago, Old Collingwood said: Look at the detail on that - superb. OC. Thanks OC, its a very nice kit. I will try one of the Renault tanks next I think mtaylor, Edwardkenway, Canute and 3 others 6 Quote
king derelict Posted July 2, 2021 Author #41 Posted July 2, 2021 4 hours ago, mtaylor said: Looks great from here, Alan. I hope the weathering goes well. Thanks Mark The tracks were harder than I expected but they do look good. Alan mtaylor, Canute, Egilman and 3 others 6 Quote
king derelict Posted July 2, 2021 Author #42 Posted July 2, 2021 3 hours ago, CDW said: If I did not know it’s 1:72 scale, would think it’s 1:35 for sure. Excellent! Thanks for the great comment Craig I have enjoyed this one a lot. Alan mtaylor, Egilman, Edwardkenway and 3 others 6 Quote
king derelict Posted July 2, 2021 Author #43 Posted July 2, 2021 Today I painted the last details, the shovel and the axe and touched up a few areas that needed attention. Then the weathering! I used the Steel paint from the Bare Metal Oilbrusher set I used very small amounts where I thought there might be significant wear. and then washed it to thin the effect. I used the AV Vallejo Rust, Stain and Streaking set for rust. I kept it to limited areas, mostly the corners of the track guards that might have got beaten up in training. I used the darker colours to get a deep, paint chipping effect and surrounded it with the light rust colour which I washed out with a wet brush. I added a light rust wash to the wheel centres and also brushed a small amount over the bare steel effects which produced a result that I like. I'm not sure if the decal on the hatches was necessary, the information is limited I think this is finished. I hope you like it. Thanks for looking and responding Alan Ainars Apalais, Jack12477, Canute and 11 others 11 1 2 Quote
Jack12477 Posted July 2, 2021 #44 Posted July 2, 2021 Very nicely done! 👍👍 mtaylor, Old Collingwood, Egilman and 4 others 7 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
Old Collingwood Posted July 2, 2021 #45 Posted July 2, 2021 Now that does look nice - just about perfect weathering - you should be pleased with that mate. OC. mtaylor, popeye the sailor, Egilman and 2 others 5 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
king derelict Posted July 3, 2021 Author #46 Posted July 3, 2021 23 hours ago, Jack12477 said: Very nicely done! 👍👍 Thank you Jack. Your AFV models are spectacular so your praise means a lot Alan mtaylor, popeye the sailor, Edwardkenway and 3 others 5 1 Quote
king derelict Posted July 3, 2021 Author #47 Posted July 3, 2021 22 hours ago, Old Collingwood said: Now that does look nice - just about perfect weathering - you should be pleased with that mate. OC. Thank you OC. I feel I didn't overdo it this time and I like the result. There is a lot to learn there. Alan Egilman, Old Collingwood, mtaylor and 3 others 6 Quote
Baker Posted July 3, 2021 #48 Posted July 3, 2021 A very nice model. Congrats 👍. mtaylor, Edwardkenway, Canute and 3 others 6 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
Egilman Posted July 3, 2021 #49 Posted July 3, 2021 Amazing detail for a model so small, very well done.... Canute, Edwardkenway, popeye the sailor and 3 others 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
lmagna Posted July 3, 2021 #50 Posted July 3, 2021 Very nice work Alan I know next to nothing about German tanks. All these years all I thought of was Panzers and Tigers, and here on the forum, thanks to builds like this, I am learning that they had a seemingly endless line of armored vehicles I knew nothing about. I enjoyed following your build, thanks for sharing. Old Collingwood, Canute, Edwardkenway and 4 others 7 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey
king derelict Posted July 3, 2021 Author #51 Posted July 3, 2021 2 hours ago, lmagna said: Very nice work Alan I know next to nothing about German tanks. All these years all I thought of was Panzers and Tigers, and here on the forum, thanks to builds like this, I am learning that they had a seemingly endless line of armored vehicles I knew nothing about. I enjoyed following your build, thanks for sharing. Thank you for the kind comments Lou. I'm learning about the Armour world too. I hadn't realized that there were these small, two man infantry tanks armed with machine guns. I have a couple of Renault tanks that look about the same size and the Panzer II which I think is a similar size too. I am thinking of building a Tiger or similar large battle tank to provide a comparison Its great to see the expanding range of AFVs having really only been aware of Shermans, Panthers and Tigers, T-34s and Churchills. After reading Colin Forbes Tramp in Armour" I would like to try a Matilda at some point. Thanks Again Alan lmagna, Baker, Canute and 6 others 9 Quote
lmagna Posted July 3, 2021 #52 Posted July 3, 2021 25 minutes ago, king derelict said: After reading Colin Forbes Tramp in Armour" I would like to try a Matilda at some point. Whatever you choose I will be looking in. They may be small but you make them interesting. mtaylor, Egilman, Old Collingwood and 3 others 6 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey
king derelict Posted July 3, 2021 Author #53 Posted July 3, 2021 Thanks Lou; I think the Renault will be next up. It looks like I won't be subjected to individual track links this time. I need to read up a bit more as the Renault 17 spans a period 1917 - 1945 or possibly later with a wide range of operators from France through the US to Brazil Alan mtaylor, Egilman, Old Collingwood and 4 others 7 Quote
Baker Posted July 4, 2021 #54 Posted July 4, 2021 If you need info about the ft17. Just ask. The ft17 has many possibilities. Canute, Egilman, Old Collingwood and 3 others 6 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
king derelict Posted July 5, 2021 Author #55 Posted July 5, 2021 (edited) On 7/4/2021 at 2:30 AM, Backer said: If you need info about the ft17. Just ask. The ft17 has many possibilities. Patrick Yes please. The Flyhawk kit is quite comprehensive; it builds two complete vehicles in any of six configurations. A paint scheme is provided for all six but nowhere in the instructions have I found a clue to the six configurations or the operators of each paint scheme. The first one has a marking "Le Tigre" so maybe that is a French one. I quite like the white / brown camouflage but have no idea who might be behind Ïnfantaria" marking. If you are able to shed any light on any of these paint schemes it would help enormously. Many Thanks for your help and Interest. Alan Edited July 5, 2021 by king derelict Forgot to add image, Sorry popeye the sailor, lmagna, Canute and 2 others 5 Quote
Baker Posted July 5, 2021 #56 Posted July 5, 2021 (edited) A first impression I France WW1 western front (Le Tigre : the tiger) II France WW1 western front III France WW1 western front IV Spain post WW1 in Spanish Morocco V France WW2 (1940) (Le champagne) in French Morocco VI France WW2 (1940) home land If you build the WW2 MG version, this should have a more modern MG Edited July 5, 2021 by Backer popeye the sailor, mtaylor, Edwardkenway and 3 others 5 1 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
Egilman Posted July 5, 2021 #57 Posted July 5, 2021 1 hour ago, Backer said: II France WW1 western front This is an American marked tank..... It doesn't have the playing card flash on the tail panels, The French were the only ones to put it there... The colors and camo pattern is French as they came from the factory painted that way... GS Patton jr in 1918 (he commanded the field portion of the Tank Corps in France) set up the marking scheme for US tanks.... This below is part of the order he circulated.... Tanks: In addition to its registration number, any battle tank carries two brands which one can distinguish the Battalion Group or the Group or the Company or the tank and in the Group or the Company, battery or section of tank. The brand of the Group or Company is formed by a cartridge as defined below: Group 1 or 1st Company - circle 25 cm in diameter. Group 2 or 2nd Company - square 25 cm in diameter. Group 3 or 3rd Company - Triangle 25 cm in diameter. Group 4 or 4th Company - Diamond 25 cm in diameter. The cartridges are painted in white on each side of the tank in half of the upper rear panel. The brand of battery or Section consists of an Ace inscribed in a circle of 15 cm, painted black in the center of the cartridge after the rule below: Battery 1 or Section 1 - Ace of Spades Battery 2 or Section 2 - Ace of Hearts Battery 3 or Section 3 - Ace of Diamonds Reserve (Section d’echelon) - Ace of Clubs French Renault FT units were organised in : Régiment - Bataillon - Compagnie - Section In addition, they would paint a small number next to the designation marking signifying which tank in the section it was.... So Tank #II in the sheet of schemes above is marked for the 426th tank battalion, 4th company, 3rd section, Tank #1..... Not all American tanks were marked like this but the ones in Patton's command were... Canute, lmagna, popeye the sailor and 4 others 6 1 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
mtaylor Posted July 5, 2021 #58 Posted July 5, 2021 I would have thought the IV paint was the winter one. Old Collingwood, Baker, Edwardkenway and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
king derelict Posted July 6, 2021 Author #59 Posted July 6, 2021 6 hours ago, Backer said: A first impression I France WW1 western front (Le Tigre : the tiger) II France WW1 western front III France WW1 western front IV Spain post WW1 in Spanish Morocco V France WW2 (1940) (Le champagne) in French Morocco VI France WW2 (1940) home land If you build the WW2 MG version, this should have a more modern MG Thanks Patrick That is hugely helpful. I had been thinking Spain for #4 but the paint scheme doesn't look very desert but I suppose Spanish Morocco was also the coast and some of the Rif mountains as well as Western Sahara, I still like the paint scheme so this will be one of teh two builds. Thanks again Patrick Alan Jack12477, Egilman, Old Collingwood and 6 others 9 Quote
king derelict Posted July 6, 2021 Author #60 Posted July 6, 2021 5 hours ago, Egilman said: This is an American marked tank..... It doesn't have the playing card flash on the tail panels, The French were the only ones to put it there... The colors and camo pattern is French as they came from the factory painted that way... GS Patton jr in 1918 (he commanded the field portion of the Tank Corps in France) set up the marking scheme for US tanks.... This below is part of the order he circulated.... Tanks: In addition to its registration number, any battle tank carries two brands which one can distinguish the Battalion Group or the Group or the Company or the tank and in the Group or the Company, battery or section of tank. The brand of the Group or Company is formed by a cartridge as defined below: Group 1 or 1st Company - circle 25 cm in diameter. Group 2 or 2nd Company - square 25 cm in diameter. Group 3 or 3rd Company - Triangle 25 cm in diameter. Group 4 or 4th Company - Diamond 25 cm in diameter. The cartridges are painted in white on each side of the tank in half of the upper rear panel. The brand of battery or Section consists of an Ace inscribed in a circle of 15 cm, painted black in the center of the cartridge after the rule below: Battery 1 or Section 1 - Ace of Spades Battery 2 or Section 2 - Ace of Hearts Battery 3 or Section 3 - Ace of Diamonds Reserve (Section d’echelon) - Ace of Clubs French Renault FT units were organised in : Régiment - Bataillon - Compagnie - Section In addition, they would paint a small number next to the designation marking signifying which tank in the section it was.... So Tank #II in the sheet of schemes above is marked for the 426th tank battalion, 4th company, 3rd section, Tank #1..... Not all American tanks were marked like this but the ones in Patton's command were... Many Thanks Egilman. That is some very detailed research and I value it a lot. I learned a lot as well now having an identity for the tank. Its a great help Thanks again Alan Jack12477, lmagna, Old Collingwood and 5 others 7 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.