Glenn-UK Posted September 3, 2021 #31 Posted September 3, 2021 I had no issues with the deck parts, took my time to make sure they were fully enaged in the bulkhead locating slots. Canute, Old Collingwood and mtaylor 3 Quote Glenn (UK)
mtaylor Posted September 3, 2021 Author #32 Posted September 3, 2021 Thanks Glenn. I just realized that somehow I missed 72. Thus, stern part of the deck wasn't seating. I'll go stand in the dummy corner for a bit. Edwardkenway, BobG, Old Collingwood and 3 others 1 5 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Kevin Posted September 4, 2021 #33 Posted September 4, 2021 looking very good, shame im unable to find space to get in and watch,, lol to many followers Canute, mtaylor, Edwardkenway and 1 other 4 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat
BobG Posted September 4, 2021 #34 Posted September 4, 2021 5 hours ago, mtaylor said: I just realized that somehow I missed 72. Thus, stern part of the deck wasn't seating. Sounds like something I'd do! 🤪 Canute and mtaylor 2 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
mtaylor Posted September 4, 2021 Author #35 Posted September 4, 2021 Kevin, no worries. Always seats... did I mention the balcony? Not the first time I've done that Bob, and probably not the last. But it's part of what I need to do for me. I feel like how to build a model is coming back to me. Well, I did step 72, the one I missed...<sigh> and did it and also faired the top of the bulkheads. Re-glued one down as the glue/water mix I was using didn't hold. A true comedy of errors but no real harm done. Edwardkenway, Jasseji, JeffT and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
DaveBaxt Posted September 4, 2021 #36 Posted September 4, 2021 (edited) 8 hours ago, mtaylor said: Dave, welcome to my circus.... I'm feeling like the head clown today. If questions are related to this build, feel free to ask here. Otherwise, PM is fine and also there are all the subforums too. Thank you Mark it is much appreciated. As I understand it you have mainly built you previous models 'scratch build' so with that in mind do you expect to use any large power tools for this build such as Miller,lathe and that sort of thing. I appreciate that this model has been designed so that everything fits together perfect and therefore should be no need but if you have the equiplment ?....... Edited September 4, 2021 by DaveBaxt Jack12477, mtaylor, Old Collingwood and 1 other 4 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour
Glenn-UK Posted September 4, 2021 #37 Posted September 4, 2021 (edited) 7 hours ago, mtaylor said: Thanks Glenn. I just realized that somehow I missed 72. Thus, stern part of the deck wasn't seating. I'll go stand in the dummy corner for a bit. I spend quite a bit of my time in the dummy corner. I made a notch on the front right inner bulwark pattern which was fouling on bulkhead 3. Thankfully I realised that this was actually the front left pattern before I glued the part. The notch will not be visible once the spirketting pattern is added and is also under the gangway. Edited September 4, 2021 by glennard2523 Canute, Jasseji, GrandpaPhil and 6 others 9 Quote Glenn (UK)
Jasseji Posted September 4, 2021 #38 Posted September 4, 2021 3 hours ago, glennard2523 said: I spend quite a bit of my time in the dummy corner. I made a notch on the front right inner bulwark pattern which was fouling on bulkhead 3. Thankfully I realised that this was actually the front left pattern before I glued the part. The notch will not be visible once the spirketting pattern is added and is also under the gangway. It is somehow satisfying to see, how experienced modellers do make the same mistakes as beginners no offence intended Chuck Seiler, Glenn-UK, mtaylor and 4 others 4 3 Quote Jacek Current Build: HMS Sphinx 1775 - Vanguard Models 1/64 On Hold/Parallel: Lady Nelson - Amati/Victory Models 1/64
Glenn-UK Posted September 4, 2021 #39 Posted September 4, 2021 3 hours ago, Jasseji said: It is somehow satisfying to see, how experienced modellers do make the same mistakes as beginners no offence intended I still class myself as an enthusiastic beginner. Canute, Old Collingwood, mtaylor and 2 others 3 2 Quote Glenn (UK)
mtaylor Posted September 4, 2021 Author #40 Posted September 4, 2021 12 hours ago, DaveBaxt said: Thank you Mark it is much appreciated. As I understand it you have mainly built you previous models 'scratch build' so with that in mind do you expect to use any large power tools for this build such as Miller,lathe and that sort of thing. I appreciate that this model has been designed so that everything fits together perfect and therefore should be no need but if you have the equiplment ?....... I really see no need for large power tools on this model as I'm pretty much building it "out of the box". If rigging, maybe a lathe for the masts but those can also be done by hand but I'm thinking only stub masts on this one. Jack12477, Canute, DaveBaxt and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Chuck Seiler Posted September 4, 2021 #41 Posted September 4, 2021 On 8/30/2021 at 1:05 PM, mtaylor said: Er, yes Grant, the bar in the corner is always open. HEY!!! You told me that alcohol was used for ungluing parts!!! Anywho, pulling up a chair and bowl of popcorn. bdgiantman2, Old Collingwood, mtaylor and 3 others 6 Quote Chuck Seiler San Diego Ship Modelers Guild Nautical Research Guild Current Build:: Colonial Schooner SULTANA (scratch from Model Expo Plans), Hanseatic Cog Wutender Hund, Pinas Cross Section Completed: Missouri Riverboat FAR WEST (1876) Scratch, 1776 Gunboat PHILADELPHIA (Scratch), John Smith Shallop
Gregory Posted September 4, 2021 #42 Posted September 4, 2021 Knowing you were in the doldrums for a while, I'm looking forward to seeing your progress on this kit.. I know you will do it justice.. Jack12477, Canute, mtaylor and 1 other 4 Quote “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon
mtaylor Posted September 4, 2021 Author #43 Posted September 4, 2021 1 hour ago, Chuck Seiler said: HEY!!! You told me that alcohol was used for ungluing parts!!! Anywho, pulling up a chair and bowl of popcorn. Well, the bar serves a dual purpose. That's my excuse and I'm sticking with it. 24 minutes ago, Gregory said: Knowing you were in the doldrums for a while, I'm looking forward to seeing your progress on this kit.. I know you will do it justice.. Thanks Gregory. I think I have it sorted. Right now waiting for glue to dry before checking. Edwardkenway, Canute, Old Collingwood and 3 others 6 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
mtaylor Posted September 10, 2021 Author #44 Posted September 10, 2021 Sometimes, I'm just as slow as molasses in winter... I took my time fairing the inside of the bulwarks/hull area and installed the inner planking. Not too shabby from where I sit. Also added the quarterdeck beam spacing. Time to dig out the Gundeck planking pieces, fit them and paint the inside red. I'll probably lay down a thin coat of Vallejo matt varnish first as my tests showed a smoother finish than just doing the paint itself as I'm using a brush. This should be fun. In case you're wondering what the clothes pins are for, they hold the hull down to the building stand. Gregory, Glenn-UK, Edwardkenway and 23 others 26 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jack12477 Posted September 10, 2021 #45 Posted September 10, 2021 Looking good, Mark. Old Collingwood, mtaylor, Edwardkenway and 1 other 4 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
bdgiantman2 Posted September 10, 2021 #46 Posted September 10, 2021 Mighty fine looking ship so far, buddy. Keep up the progress on her. Brian D. Edwardkenway, mtaylor, Old Collingwood and 1 other 4 Quote
Old Collingwood Posted September 10, 2021 #47 Posted September 10, 2021 On 9/4/2021 at 4:15 AM, Kevin said: looking very good, shame im unable to find space to get in and watch,, lol to many followers I've got 2 hammocks me old mucker - you can pinch on eof those. OC. Canute, mtaylor and Edwardkenway 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted September 10, 2021 #48 Posted September 10, 2021 Looking so nice Mark - so good seeing you getting stuck into this. OC. Edwardkenway, mtaylor and Canute 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Jasseji Posted September 10, 2021 #49 Posted September 10, 2021 3 hours ago, mtaylor said: Sometimes, I'm just as slow as molasses in winter... I took my time fairing the inside of the bulwarks/hull area and installed the inner planking. Not too shabby from where I sit. Also added the quarterdeck beam spacing. Time to dig out the Gundeck planking pieces, fit them and paint the inside red. I'll probably lay down a thin coat of Vallejo matt varnish first as my tests showed a smoother finish than just doing the paint itself as I'm using a brush. This should be fun. In case you're wondering what the clothes pins are for, they hold the hull down to the building stand. I use a building slip to hołd her down, find that using the privuded cradle doesnt allow holding it securely. Anyway, varnish then painting? I See you broke the part from the deck too mtaylor, Canute, Old Collingwood and 2 others 5 Quote Jacek Current Build: HMS Sphinx 1775 - Vanguard Models 1/64 On Hold/Parallel: Lady Nelson - Amati/Victory Models 1/64
mtaylor Posted September 10, 2021 Author #50 Posted September 10, 2021 Thanks for the likes and comments. 16 hours ago, Jasseji said: I use a building slip to hołd her down, find that using the privuded cradle doesnt allow holding it securely. Anyway, varnish then painting? I See you broke the part from the deck too I don't have a keel clamp or building slip. Had one way back years ago and never used it for some reason. I'm working on the varnishing then paint thing. Some testing shows I get a smoother finish (using a brush) but.... I'll probably just paint. Canute, chris watton, Old Collingwood and 2 others 5 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
James H Posted September 10, 2021 #51 Posted September 10, 2021 4 minutes ago, mtaylor said: I don't have a keel clamp or building slip. Despite having the HZ ones here, I simply never use fancy tools for holding hulls etc. Never found the need, ultimately. mtaylor, Old Collingwood, BobG and 2 others 5 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: Zip, nada! On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48
mtaylor Posted September 11, 2021 Author #52 Posted September 11, 2021 I decided to "size" the gunports and get the skin to match the port before going any further. Past history tells me I'm better off doing this now than waiting until the planking on the exterior is done. Once done, I'll paint the inside red and add the spiriting and deck clamp before painting. BobG, Gregory, Canute and 2 others 5 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jasseji Posted September 11, 2021 #53 Posted September 11, 2021 3 hours ago, mtaylor said: I decided to "size" the gunports and get the skin to match the port before going any further. Past history tells me I'm better off doing this now than waiting until the planking on the exterior is done. Once done, I'll paint the inside red and add the spiriting and deck clamp before painting. Indeed, i find that i should have done it before painting Canute, Edwardkenway, mtaylor and 1 other 4 Quote Jacek Current Build: HMS Sphinx 1775 - Vanguard Models 1/64 On Hold/Parallel: Lady Nelson - Amati/Victory Models 1/64
mtaylor Posted September 15, 2021 Author #54 Posted September 15, 2021 I'm up to instruction 115. Been a bit of touch and go due to a small accident but all is well... Had a paint spill while painting the aft end of the deck clamps and spirketting. Nothing major just some drippage but ended up it was to just to paint them as they'll be pretty much in the dark. Note to self.... stop being a clumsy putz. Here's the current state of things. gjdale, marktiedens, Jack12477 and 12 others 15 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Old Collingwood Posted September 15, 2021 #55 Posted September 15, 2021 That is looking so nice Mark - the detail and build of it is really inspiring - you can see its going to be a Great build. OC. Edwardkenway, Canute and mtaylor 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
BobG Posted September 15, 2021 #56 Posted September 15, 2021 She's coming along nicely, Mark. Old Collingwood, Canute and mtaylor 3 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
Kevin Posted September 15, 2021 #57 Posted September 15, 2021 Very nice mark Old Collingwood, Canute and mtaylor 3 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat
Jasseji Posted September 15, 2021 #58 Posted September 15, 2021 Nice of you to join us, now catch up mtaylor, Old Collingwood and Canute 2 1 Quote Jacek Current Build: HMS Sphinx 1775 - Vanguard Models 1/64 On Hold/Parallel: Lady Nelson - Amati/Victory Models 1/64
gjdale Posted September 15, 2021 #59 Posted September 15, 2021 Looking good Mark. As for the paint spill - what paint spill? Old Collingwood, Canute and mtaylor 3 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
Jasseji Posted September 15, 2021 #60 Posted September 15, 2021 3 minutes ago, gjdale said: Looking good Mark. As for the paint spill - what paint spill? the manual asks for a cutoff of the red color in the cabin area, Mark painted it over completely so the spricketing pattern is red on the whole lenght - i should have done the same to be honest after i got the paint spill on the cutoff mtaylor, Old Collingwood and Canute 3 Quote Jacek Current Build: HMS Sphinx 1775 - Vanguard Models 1/64 On Hold/Parallel: Lady Nelson - Amati/Victory Models 1/64
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.