realworkingsailor Posted December 7, 2021 Share #1 Posted December 7, 2021 I can't quite remember when exactly I bought this Confederacy kit, probably sometime around 2012 or 2013. It sat for a long time in the closet, virtually untouched, except for the manual. I think I may have the most well read manual out there, (With tongue firmly planted in cheek; I think MS could do a little better job on the binding, it wasn't really designed to stand up to the rigours of repeated readings 🤪). I finally started started picking away at this build some four or five years ago, between other projects. Progress has been largely sporadic, with more than a few backwards steps being taken. On many occasions the self-critic took over and the kit was shelved for months (or most recently for almost two years). For many reasons (of which, the above is just one), I've avoided a build log until now. I'm at a point where I'm satisfied with my progress so far, and I hope that the worst of the back stepping is now over. I have completed the planking from the wales upwards and I'm now in the process of adding the first beaded moulding strips. The starboard side mouldings have been added, and the port side is in progress. If things look a little wonky with the stern light window frames (cills and lintels), it was due to an unfortunate incident involving the large nose of a curious young german shepherd, that decided to investigate the stern, while work was being done on the other end of the ship. The interloping nose went undetected until the work required a shift in position... I'll leave the rest up to your imaginations.. but suffice it to say, it wasn't pretty. Pieces where quickly gathered up, and splintered wood glued back together. Before the time comes to attach the transom, everything will be revisited and correctly re-aligned. I've used Minwax Golden Oak stain for the planking above the wale, with some Polyscale acrylics that I had kicking around, for the black wale and the red gun ports. Andy yvesvidal, dvm27, EricWilliamMarshall and 10 others 13 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
Jim Lad Posted December 7, 2021 Share #2 Posted December 7, 2021 Great to see another build log from you, Andy. Looks like you've done a great jog so far. John realworkingsailor, mtaylor and popeye the sailor 3 Quote Link to comment Share on other sites More sharing options...
WalrusGuy Posted December 7, 2021 Share #3 Posted December 7, 2021 I'll be following with a lot of interest! I am also building the Confederacy (currently halfway through the planking below the wales). Your model is looking fantastic! 🙂 mtaylor, popeye the sailor and realworkingsailor 3 Quote Current: USF Confederacy - Model Shipways (Build Log) HMS Pickle - Caldercraft (Build Log) Complete: Virgina 1819 - Artesania Latina (Gallery) U.S. Brig Syren - Model Shipways (Build Log, Gallery) On the shelf: Armed Virginia Sloop - Model Shipways Link to comment Share on other sites More sharing options...
Barbossa Posted December 7, 2021 Share #4 Posted December 7, 2021 Glad to have you back with us, Andy Great build so far. I'll pull up a chair. popeye the sailor, realworkingsailor and mtaylor 3 Quote Kind regards Christian "The original always beats the copy" (supportive statement) Link to comment Share on other sites More sharing options...
gjdale Posted December 7, 2021 Share #5 Posted December 7, 2021 Nice to see you back with a build log Andy. Looks great so far - had a chuckle over the doggy incident! popeye the sailor, mtaylor and realworkingsailor 3 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
realworkingsailor Posted December 10, 2021 Author Share #6 Posted December 10, 2021 Thanks everyone for the likes and comments! On 12/7/2021 at 2:53 PM, WalrusGuy said: I'll be following with a lot of interest! I am also building the Confederacy (currently halfway through the planking below the wales). Your model is looking fantastic! 🙂 I've had a browse through your log. Your build is looking pretty good too. Best of luck with the planking! On 12/7/2021 at 3:52 PM, gjdale said: Looks great so far - had a chuckle over the doggy incident! That's about all anyone can do, really. I guess I got lucky, she didn't try to eat any of the pieces (unlike poor BE with his Sphynx...) A small update to share. I've decided to deviate a little with the colour scheme. This goes against what I've read about the prototype's possible colour scheme (hopefully I don't get sent to boat-jail for blasphemy🤞). I've gone with a dark blue for the area of the hull between the mouldings: The official name of the colour is Polyscale "C&O Enchantment Blue". I think it compliments well with both the Golden Oak stain as well as the red from the gun ports; Polyscale "NYC Pacemaker Red" (I know, I'm using "railway" colours, but they're what I have on hand). I had thought to return to black for the QD bulwarks, but I've since decided against that, and I think I will leave them as is. I think the black would have muted the dark blue too much. On to paint the port side. Andy dvm27, popeye the sailor, Trussben and 13 others 16 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
David Lester Posted December 10, 2021 Share #7 Posted December 10, 2021 That's looking great, Andy. What a beautiful ship. David realworkingsailor, mtaylor and popeye the sailor 3 Quote Current Build - St. Roch, Billing Boats; HMS Agamemnon, Caldercraft (on hold) Previous Builds - Armed Virginia Sloop, Model Shipways; Constitution, Model Shipways; Rattlesnake, Mamoli; Virginia Privateer, Marine Model Co, restoration; Prince de Neufchatel, Model Shipways; Charles W. Morgan, Model Shipways; Pride of Baltimore II, Model Shipways, Bluenose, Model Shipways (x2); Niagara, Model Shipways; Mayfower, Model Shipways; Shamrock V, Amati; HMS Pegasus, Victory/Amati Link to comment Share on other sites More sharing options...
gjdale Posted December 10, 2021 Share #8 Posted December 10, 2021 The blue looks good Andy. I think your choice of colour scheme will make a nice point of difference to other Confederacy builds out there. popeye the sailor, realworkingsailor and mtaylor 3 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
Trussben Posted December 13, 2021 Share #9 Posted December 13, 2021 Nice to see you back with a build log Andy. mtaylor, realworkingsailor and popeye the sailor 3 Quote Current builds: HMS Pegasus TFFM. HMS Winchelsea. Completed builds: ECHO cross section.18th C Longboat.QA Barge. Medway Longboat. Link to comment Share on other sites More sharing options...
realworkingsailor Posted December 21, 2021 Author Share #10 Posted December 21, 2021 Thanks everyone for the likes and comments! On 12/10/2021 at 3:20 PM, gjdale said: The blue looks good Andy. I think your choice of colour scheme will make a nice point of difference to other Confederacy builds out there. Definitely that was the idea. I've looked through many logs, and everyone seemed to be doing largely the same thing. I want mine to stand out a little bit. At least until some future Confederacy builder decides to copy me, (which I don't mind at all), at least I will be able say I was the first, but for now I'm the "only". On 12/10/2021 at 2:21 PM, David Lester said: That's looking great, Andy. What a beautiful ship. David Thanks David, I'm doing my best. The Confederacy is a particularly graceful subject. The more I'm planking, the more her lines really start to show through. On 12/13/2021 at 3:23 PM, Trussben said: Nice to see you back with a build log Andy. Thanks Ben, it's been a while. I needed to get myself back in the right headspace, not just for ship building, but logging it too. I think my passenger car blog (down in the shore leave section) helped quite a bit in that regard. Well, I wanted to post a bit of an update, but when I went to upload an image, it came back with an error and "upload failed". I guess I shall have to wait until things get sorted out... hopefully soon. Andy EricWilliamMarshall, mtaylor, hollowneck and 1 other 4 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
flyer Posted December 21, 2021 Share #11 Posted December 21, 2021 Hi Andy Nice to hear from you again. The Confederacy really looks a beautiful subject and your work looks fine (as usual). One question remains: Every time I see that kit I wonder about those large holes in the hull between the great cabin and the quarter galleries. This is hardly according to the original plans. Doesn't it distort the look of the finished model or don't you ever notice it when looking in, through the windows? Anyway, keep up the good work! Peter realworkingsailor and mtaylor 2 Quote current build: The Naval Cutter Alert by flyer - Vanguard Models - scale 1:64 completed builds: HMS Bellerophon by flyer - Victory Models - scale 1:72 Yacht America by flyer - Mamoli - scale 1:66 - with some alterations Dolphyn Corel 1/50 Wasa Corel 1/75 La Gloire C.Mamoli 1/90 HM Bomb Vessel Granado JoTiKa HM Bomb Vessel Granado 1756 CC kit 1:64 Victory Models 1/64 HMS Pegasus by Flyer HMS Pickle, my interpretation Link to comment Share on other sites More sharing options...
realworkingsailor Posted December 21, 2021 Author Share #12 Posted December 21, 2021 7 minutes ago, flyer said: Hi Andy Nice to hear from you again. The Confederacy really looks a beautiful subject and your work looks fine (as usual). One question remains: Every time I see that kit I wonder about those large holes in the hull between the great cabin and the quarter galleries. This is hardly according to the original plans. Doesn't it distort the look of the finished model or don't you ever notice it when looking in, through the windows? Anyway, keep up the good work! Peter Thanks Peter! It’s great to hear from you too! The only thing I can attribute the large hole for the quarter galleries, is simply the way Chuck designed the kit. Looking at finished photos of other builds and the prototype, it doesn’t seem to cause too many visual issues as far as I can tell. I’m sure if someone felt like it, they could frame in a smaller doorway if they so chose. When I finally get there, if I feel it looks a bit odd, then I’ll go with my usual trick of fogging the inside of the window “glass” with a bit of dullcote. (Lets light through, but no peaking!) It does make me wonder, though, if the outermost lights on the stern should be blacked out, as opposed to clear glass…. All things to think about. Andy flyer, mtaylor and EricWilliamMarshall 3 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
realworkingsailor Posted January 1, 2022 Author Share #13 Posted January 1, 2022 Still having some issues uploading photos, (same error message keeps popping up... frustrating), but I've managed to get two pics uploaded today. Before Christmas, I wanted to post an update as I had completed the first belt of planking on the port side. After a little debate with myself whether or not to start the first belt on the starboard side (and a pause for Christmas), I'm still not sure what I want to do with the reveal on the starboard side, so in the spirit of giving myself more time to think about it (aka procrastination), I have now completed the second belt on the port side. As it is now, I'm going to finish off the port side planking before returning to the starboard side. I'm managing between two and three strakes a day (provided I've made enough pre-spiled ones for the bow). Slow but steady work. Wishing everyone a Happy New Year, and a safe and prosperous 2022. Andy WalrusGuy, Trussben, EricWilliamMarshall and 11 others 14 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
EricWilliamMarshall Posted January 1, 2022 Share #14 Posted January 1, 2022 21 minutes ago, realworkingsailor said: Still having some issues uploading photos, (same error message keeps popping up... frustrating) I hit the same problem. I find if I submit and then ‘edit’ the entry I can retry to upload with success. Beautiful build! mtaylor and realworkingsailor 2 Quote Current adventures: USS Perry of 1843, model kit by Bluejacket - Scale 1:96 Lost at Sea: Dapper Tom - model kit by Model Shipways Previous adventures: an English Pinnace, model kit by Model Shipways, Opium Smuggler Schooner Yacht 1805, model kit by Authentic Holland Models Chesapeake Bay Flattie, model kit by Midwest, USS Constitution, model kit by Revell Albatros 1912, card model kit by HMV Link to comment Share on other sites More sharing options...
gjdale Posted January 1, 2022 Share #15 Posted January 1, 2022 Nice progress on the planking Andy. realworkingsailor and mtaylor 2 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
TBlack Posted January 1, 2022 Share #16 Posted January 1, 2022 2 hours ago, realworkingsailor said: Still having some issues uploading photos, (same error message keeps popping up... frustrating), Andy, Do you suppose the pictures are too large for the program? Tom mtaylor 1 Quote Link to comment Share on other sites More sharing options...
realworkingsailor Posted January 1, 2022 Author Share #17 Posted January 1, 2022 33 minutes ago, TBlack said: Andy, Do you suppose the pictures are too large for the program? Tom You’d think that, but the photos that failed were slightly smaller in file size than the ones that did. Andy mtaylor 1 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
mtaylor Posted January 1, 2022 Share #18 Posted January 1, 2022 34 minutes ago, TBlack said: Andy, Do you suppose the pictures are too large for the program? Tom I suspect it's part of this problem: https://modelshipworld.com/topic/30784-error-code-200/ One builder did note that after posting, if he went back and hit "edit", it would take the failed photo and post it. hollowneck and realworkingsailor 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Beef Wellington Posted January 2, 2022 Share #19 Posted January 2, 2022 Great to see you back at it Andy, your Confederacy is looking very nice, the blue will make for a nice change. realworkingsailor, mtaylor and hollowneck 3 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop) Link to comment Share on other sites More sharing options...
Blue Ensign Posted January 2, 2022 Share #20 Posted January 2, 2022 She looks very nice Andy, and I like the blue ground to the Topsides . Good to see you progressing the build. B.E. mtaylor, realworkingsailor and hollowneck 3 Quote Current Build: Medway-longboat-1742-by-blue-ensign-½”-scale Completed builds: HMS Indefatigable-1794-by-blue-ensign-vanguard-models-1:64-scale HMS Sphinx 1775 by Blue Ensign. 1:64 scale - Vanguard Models Queen-Anne-Royal-Barge-circa-1700-by-Blue-Ensign Fifie fishing boat Lady Eleanor Muirneag-1903-–-a-scottish-zulu-fishing-boat-164-scale-based-on-the-vanguard-models-zulu-kit/ HM Cutter Alert 1777 HM Cutter Cheerful 1806 18th-century-English-longboat-by-Blue-Ensign-ms-148-scale/ 18thc English Pinnace by Blue Ensign-Model-Shipways-1:24 scale/ HMS-Pegasus-by-Blue-Ensign-finished-Victory-Models-1:64-scale/ Heller Seventy-four 1:150 scale - modified Le Superbe/Le Glorieux kit after Boudriot, waterline setting with sails. The schooner Pickle, Jotika pob kit 1:64 scale, my interpretation. Link to comment Share on other sites More sharing options...
realworkingsailor Posted January 2, 2022 Author Share #21 Posted January 2, 2022 Thanks everyone for the kind comments and “likes”! BE and BW, I’m glad you guys also like the blue. I was a bit worried at first that it may prove to be a somewhat controversial colour choice, but I’m pleased with all the positive responses. Andy mtaylor 1 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
realworkingsailor Posted January 9, 2022 Author Share #22 Posted January 9, 2022 A bit of an update to share on an otherwise grey Sunday morning (at least where I am). I have managed to finish the planking on the port side yesterday. I think I've managed fairly well with it. By no means is it perfect, but I'm happy with the overall result. I've given it a cursory sanding, there are a few spots that still require a little more work (nothing major), but I will get them after I've finished the starboard side. Andy GrandpaPhil, gjdale, Trussben and 8 others 11 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
WalrusGuy Posted January 9, 2022 Share #23 Posted January 9, 2022 Beautiful planking, Andy! mtaylor and realworkingsailor 2 Quote Current: USF Confederacy - Model Shipways (Build Log) HMS Pickle - Caldercraft (Build Log) Complete: Virgina 1819 - Artesania Latina (Gallery) U.S. Brig Syren - Model Shipways (Build Log, Gallery) On the shelf: Armed Virginia Sloop - Model Shipways Link to comment Share on other sites More sharing options...
realworkingsailor Posted January 30, 2022 Author Share #24 Posted January 30, 2022 A few weeks since my last update, so just a quick one to show that I'm still working away at it. Construction has slowed slightly since winter finally arrived a couple of weeks ago. Lots of fun outdoor activities, like skiing, sledding, snowshoeing, all the fun stuff that can only be done with a decent amount of the white stuff. And then for those who follow my non-maritime adventures, there's also the odd time when my main mode of transportation decides to no longer function as designed. Anyway, on the days not filled with other activities, work has progressed on the starboard side, and I've now managed to complete the first two planking belts. It's nice to begin to see the (hull) planking finish line. Andy yvesvidal, Dave_E, Trussben and 10 others 13 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
Jim Lad Posted January 30, 2022 Share #25 Posted January 30, 2022 This side is looking just as good as the other, Andy! John mtaylor and realworkingsailor 2 Quote Link to comment Share on other sites More sharing options...
CiscoH Posted January 30, 2022 Share #26 Posted January 30, 2022 Great planking job Andy. I was wondering where you got the small black miniature screw clamps in the first and third pictures of your first post. I can't find them, or maybe my google description isn't right. thanks, cisco mtaylor and realworkingsailor 2 Quote Link to comment Share on other sites More sharing options...
realworkingsailor Posted January 30, 2022 Author Share #27 Posted January 30, 2022 (edited) 27 minutes ago, CiscoH said: Great planking job Andy. I was wondering where you got the small black miniature screw clamps in the first and third pictures of your first post. I can't find them, or maybe my google description isn't right. thanks, cisco Thanks! I got those clamps years ago from Lee Valley tools. I don’t know if they still sell them. Try searching for “miniature machinist clamps”, or “tool maker’s clamps” see if that works. Andy Edited January 30, 2022 by realworkingsailor CiscoH and mtaylor 2 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
David Lester Posted January 31, 2022 Share #28 Posted January 31, 2022 Perfect planking! realworkingsailor and mtaylor 2 Quote Current Build - St. Roch, Billing Boats; HMS Agamemnon, Caldercraft (on hold) Previous Builds - Armed Virginia Sloop, Model Shipways; Constitution, Model Shipways; Rattlesnake, Mamoli; Virginia Privateer, Marine Model Co, restoration; Prince de Neufchatel, Model Shipways; Charles W. Morgan, Model Shipways; Pride of Baltimore II, Model Shipways, Bluenose, Model Shipways (x2); Niagara, Model Shipways; Mayfower, Model Shipways; Shamrock V, Amati; HMS Pegasus, Victory/Amati Link to comment Share on other sites More sharing options...
realworkingsailor Posted February 9, 2022 Author Share #29 Posted February 9, 2022 Thanks to everyone for the kind comments and likes! Yesterday was a bit of a milestone day. The hull planking is finally finished! Hooray! As you can see, I decided to fully plank over the reveal section. It partly came down to personal preference, and partly because over the course of the several years that I have been building (storing, transporting, shuffling aside) the model, some of the frames segments had accrued some small dings and dents (a small drawback of basswood). I've just completed prepping and staining the stern post, so while that dries, time to grease up the old elbow and get making some dust! I really enjoy the sense of satisfaction one gets when a hull has been completed, and I am particularly enjoying the relief that comes knowing I don't have to go all over it again with a second layer (big "YAY"!). Andy CiscoH, robdurant, WalrusGuy and 3 others 5 1 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
WalrusGuy Posted February 9, 2022 Share #30 Posted February 9, 2022 Beautiful planking job, Andy! Very nicely executed 🙂 realworkingsailor and mtaylor 2 Quote Current: USF Confederacy - Model Shipways (Build Log) HMS Pickle - Caldercraft (Build Log) Complete: Virgina 1819 - Artesania Latina (Gallery) U.S. Brig Syren - Model Shipways (Build Log, Gallery) On the shelf: Armed Virginia Sloop - Model Shipways Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.