king derelict Posted February 3, 2023 Author #91 Posted February 3, 2023 I reached a minor milestone today. I turned the corner onto the last section of walling and the end of the outer wall is in sight (at least the outer half - it all has to be done again on the inner side) You can also see that I have reached the point on the last round tower where the landscape starts to climb onto the wall and the brickwork no longer runs the full depth of the wall. Its going to be interesting trying to keep the tiers horizontal but the pattern on the cardboard formers should help I'm rough shaping and cleaning up while I wait for glue to set but I will go back and finish the tidying up once its all built. I taped the joins in the cardboard formers for the main structure and hand painted the interior black with craft acrylic to help reduce light bleed through. I need to map out the lights and how to position them. This probably needs to be done before adding the blocks. I also need to add partitions to stop lines of sight through the building. They will be full height and will also help hold the oof up. I'm sure Aedes Ars know what they are doing but they seem to trust some weighty structure to a few bits of cardboard The roof template shows the outlines of the next level and I have been tracing out which elements will have windows or doors and thus need leds in place and wires routing through the roof And here is a bigger version of those walls and towers Conway Castle, North Wales. A lovely place to explore Thanks for looking in, for the likes and the comments Alan Canute, realworkingsailor, Edwardkenway and 10 others 11 2 Quote
Old Collingwood Posted February 3, 2023 #92 Posted February 3, 2023 You are doing an Amazing time consuming minute detailing piece of model building - loving this. I was once lucky enough to live 2 minutes away from a castle, the castle (towns curtain wall) was our back garden wall, thought you might like to see a few pics I took of it. OC. mtaylor, Canute, AJohnson and 11 others 13 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
CDW Posted February 3, 2023 #93 Posted February 3, 2023 13 minutes ago, Old Collingwood said: You are doing an Amazing time consuming minute detailing piece of model building - loving this. I was once lucky enough to live 2 minutes away from a castle, the castle (towns curtain wall) was our back garden wall, thought you might like to see a few pics I took of it. OC. What's the history of that castle, OC. The name of it? robert952, Canute, FriedClams and 5 others 8 Quote Completed Projects: USS Fletcher 1:144 Scharnhorst 1:350 USS Independence LCS-2 1:350 1:32 J7W1 Shinden Interceptor/Fighter Fairey Swordfish Mk. II 1:48 Harbor Tug Box Scale Albatros D.V 1:32 Ala-Kart 1:25 Ferrari 250 GT California Spyder 1:24 S-100 Schnellboot 1:72 Mercury Capsule and Atlas Booster BR-52 Steam Locomotive 1:35 Triumph 3 HW Motorcycle 1:9 Scale F-16XL-2 Experimental Fighter Bomber 1:48 Rafale 1:48 F-15E Strike Eagle 1:48 Petlyakov PE-2 Soviet Dive Bomber 1:48 TBM3 Avenger 1:32 1931 Cadillac 1:25 Scammell Pioneer SV2S Heavy Breakdown Tractor 1:35 M-50 Israeli Sherman 1:35 Military Wrecker 1:32 Delahaye 135 1:24 Toyota Sard Supra GT 1:24 Enzo Ferrari 1:24 1970 Baldwin Motion Camaro 1:25 1966 Ford Galaxie 500 Stock Car 1:25 American LaFrance Eagle Fire Pumper 1:25 1940 Ford Standard Coupe 1:25 VolksWagen Dragster/Dune Buggy/Street Rod 1:25 Kawasaki Ninja H2 Carbon 1:12 Porsche GT-1 Evo 1:24 Scharnhorst 1940 1:700 IJN Akitsushima Seaplane Tender 1:700 HMS Hood 1941 1:700 Prinz Eugen 1942 1:700
Old Collingwood Posted February 3, 2023 #94 Posted February 3, 2023 1 minute ago, CDW said: What's the history of that castle, OC. The name of it? Its Pembroke Castle in South Wales UK Craig, its main history with fierce fighting was during the English Civil War in the 1600's, the castle and town was occupied by both sides Twice, but at the end the Royalists occupied it until they where starved out of it with food and water cut off from getting to the castle and town (that was then just an extension of the castle) Pic by me of the ECW re-enactors. OC. Egilman, Canute, CDW and 9 others 12 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
king derelict Posted February 4, 2023 Author #95 Posted February 4, 2023 (edited) 20 hours ago, Old Collingwood said: You are doing an Amazing time consuming minute detailing piece of model building - loving this. Thank you very much OC your photos of Pembroke castle are wonderful. Black and white is really dramatic with the right subject. I envy you living with the town wall at the end of your garden. I've walked along the town walls of Conway several times and looked down into the gardens and homes that press up against the walls Alan Edited February 4, 2023 by king derelict Autocorrect spelling Jack12477, FriedClams, Egilman and 3 others 6 Quote
Old Collingwood Posted February 4, 2023 #96 Posted February 4, 2023 35 minutes ago, king derelict said: Thank you very much OC your photos of Pembroke castle are wonderful. Black and white is really dramatic with the right subject. I envy you living with the town wall at the end of your garden. I've walked along the town walls of Conway several times and looked down into the gardens and homes that press up against the walls Alan Alas we don't live there any more, the castle was a great thing to live close to, in fact our morning dog walks was around the outside castle path and around a large pond that was connected to it, in its medieval past small carracks used to sail up a river leading to the pond then they would load/off-load by a wood jetty attached to the castle. OC. Edwardkenway, AJohnson, CDW and 5 others 8 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
king derelict Posted February 7, 2023 Author #97 Posted February 7, 2023 I still slowly grinding (literally) away at the outer walls. As usual nothing much got done at the weekend but I got some useful time in today. It still moves along fairly slowly because I think its worth letting a tier set before trying to sand back level and risking knocking off a couple of blocks and having to do it all over again. I turned the last corner and am on the last tower and section of wall This is where the hill will climb up the wall And the panorama showing the completed work so far. Our nice post lady brought a package from the UK this morning The 10mm Pendraken medieval figures. They are really beautiful and I think they will work well. Thank you @Old Collingwood for the suggestion. They have a medieval cannon set too so I am considering a couple. I'm still a bit concerned about @Egilmanhowitzer Painting them is going to be interesting I think we will be going for *overall effect* Does anyone know how to prime metal figures? I have the Mr Metal Primer for PE so I am planning on using that Some thought is going to have to be given to adding them to the model. They are too small to really remove from their bases so maybe I can thin the base down. Thanks for looking in, all the likes and comments. Alan . Egilman, yvesvidal, GrandpaPhil and 12 others 15 Quote
Old Collingwood Posted February 7, 2023 #98 Posted February 7, 2023 Excellent progress Alan, and so like the look of your new figures - metal figures do paint up nice as they can have sharper details than plastic ones, with regards to primers for metal figures, I would advise to make sure they get a good soapy wash first to remove and release agants - with the primer, it sunds like your Mr Metal Primer would be OK but I'm not sure 100%. OC. mtaylor, Jack12477, hof00 and 7 others 10 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Egilman Posted February 7, 2023 #99 Posted February 7, 2023 3 hours ago, king derelict said: I'm still a bit concerned about @Egilmanhowitzer Aww I wouldn't worry too much, it is still in it's shipping crate and the stevedore's don't seem to be in too much of a hurry.... {chuckle} Besides the Masonry is looking too good to blast holes in it.... Nice work... Jack12477, Old Collingwood, AJohnson and 5 others 8 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Canute Posted February 9, 2023 #100 Posted February 9, 2023 Alan, looking good. I think your current primer will be fine. A modicum if cleanup then fire away with the figure painting. 👍 FriedClams, Edwardkenway, AJohnson and 4 others 7 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
king derelict Posted February 12, 2023 Author #101 Posted February 12, 2023 On 2/6/2023 at 9:01 PM, Old Collingwood said: Excellent progress Alan, and so like the look of your new figures - metal figures do paint up nice as they can have sharper details than plastic ones, with regards to primers for metal figures, I would advise to make sure they get a good soapy wash first to remove and release agants - with the primer, it sunds like your Mr Metal Primer would be OK but I'm not sure 100%. OC. Thank you OC. Thank you for the advice regarding the figures. I am amazed at the detail. You can see beards on faces and individual fingers on hands. Alan Old Collingwood, FriedClams, mtaylor and 3 others 6 Quote
king derelict Posted February 12, 2023 Author #102 Posted February 12, 2023 On 2/7/2023 at 12:28 AM, Egilman said: Aww I wouldn't worry too much, it is still in it's shipping crate and the stevedore's don't seem to be in too much of a hurry.... {chuckle} Besides the Masonry is looking too good to blast holes in it.... Nice work... Thanks EG Looks like there is other howitzer activity on the board too Alan Old Collingwood, Edwardkenway, Egilman and 3 others 6 Quote
king derelict Posted February 12, 2023 Author #103 Posted February 12, 2023 On 2/9/2023 at 8:29 AM, Canute said: Alan, looking good. I think your current primer will be fine. A modicum if cleanup then fire away with the figure painting. 👍 Thanks Ken The figures are very nice but a few mould lines need to be filed down. I'm very impressed with them. Alan Old Collingwood, FriedClams, Edwardkenway and 2 others 5 Quote
king derelict Posted February 12, 2023 Author #104 Posted February 12, 2023 Sorry for the dolorous progress. Real like has been intruding badly these last days. Partly its self inflicted. I was asked to come back and consult for a couple of engine tests and I (possibly foolishly) agreed. It will keep the wolf a few paces away from the door and doubtless improve sales at Sprue brothers et al. Its also good to hear the howl of an F135 at full throttle again Anyway, in quiet hours some progress has been made and the outer faces of the walls have been finished Now I have to turn it around and do it all over again on the inside. Some of the blockwork on the inside of the towers is going to be interesting.. I had planned to take a break at this point but I'm enjoying it too much and playing with engines will provide enough diversion so I'll try to keep going. Its going to be slow though so get comfy and lay in plenty of snacks and adult beverages Thanks for all the support, likes and comments Alan hof00, Javlin, realworkingsailor and 15 others 18 Quote
Old Collingwood Posted February 12, 2023 #105 Posted February 12, 2023 Thats looking really nice - certainly taking shape now. OC. AJohnson, FriedClams, Egilman and 4 others 7 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Canute Posted February 13, 2023 #106 Posted February 13, 2023 Those inside curves look like a real bear to lay your blocks into. You work for P&W? Jack12477, Egilman, FriedClams and 3 others 6 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
king derelict Posted February 13, 2023 Author #107 Posted February 13, 2023 15 hours ago, Old Collingwood said: Thats looking really nice - certainly taking shape now. OC. Thank you OC. This build is going much better than the Rochelle Towers. All the feedback and help and likes keeps morale up and actually I think its easier to see progress on this one. I'm still keen to push ahead instead of sticking it out of sight for a while Alan Old Collingwood, Jack12477, FriedClams and 2 others 5 Quote
king derelict Posted February 13, 2023 Author #108 Posted February 13, 2023 2 hours ago, Canute said: Those inside curves look like a real bear to lay your blocks into. You work for P&W? I'm not looking forward to those inside curves. I foresee a lot of custom filing in my future. I work for Rolls-Royce supporting the Lift System that bolts to the P+W engine. Liftfan, swivel duct and roll system. All the unconventional stuff. Alan FriedClams, Old Collingwood, mtaylor and 4 others 7 Quote
AJohnson Posted February 13, 2023 #109 Posted February 13, 2023 Very impressive looking Alan, you have the patience of a Saint! 😇 mtaylor, Old Collingwood, Edwardkenway and 4 others 7 Quote Andrew Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) , HMAV Bounty - Caldercraft (1/64) Completed (Kits):- Vanguard Models (1/64) :- HM Cutter Trial , Nisha - Brixham trawler Caldercraft (1/64) :- HMS Orestes(Mars), HM Cutter Sherbourne Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight
Landlubber Mike Posted February 13, 2023 #110 Posted February 13, 2023 What a really cool project Alan! Great job so far. 8500 bricks?? I have been dreading coppering the hull of my Pegasus, but maybe I should feel lucky! Egilman, mtaylor, Canute and 5 others 7 1 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)
king derelict Posted February 19, 2023 Author #111 Posted February 19, 2023 On 2/13/2023 at 11:38 AM, AJohnson said: Very impressive looking Alan, you have the patience of a Saint! 😇 Thank you very much Andrew. Its quite restful adding the blocks and seeing the walls grow but shaping the blocks does require a bit of determination to continue Alan AJohnson, Edwardkenway, Egilman and 3 others 6 Quote
king derelict Posted February 19, 2023 Author #112 Posted February 19, 2023 On 2/13/2023 at 2:39 PM, Landlubber Mike said: What a really cool project Alan! Great job so far. 8500 bricks?? I have been dreading coppering the hull of my Pegasus, but maybe I should feel lucky! Thank you Mike I'm looking forward to the landscaping. The bag of blocks has become noticeable lighter. I'm hoping that I have enough. So far morale is holding up but I'm not looking forward to building the inner walls next. Alan Old Collingwood, Edwardkenway, Landlubber Mike and 5 others 8 Quote
king derelict Posted March 5, 2023 Author #113 Posted March 5, 2023 I haven't given up on this project but time to work on it has become rather scarce. That part time consulting role has become a sixty hour week working all seven days. So I'm doing a lot more of this instead of adding blocks to the Castillo Loarre. It has had the effect of recharging my interest and I'm looking forward to getting back into this in the near future. So, apologies for the lack of progress and updates. I hardly have time to check a few threads and as usual be amazed at what everyone is doing. I'm also jealous of course. At least I hope to pass on the benefits of working to Sprue Brothers shortly. Alan robert952, Edwardkenway, Old Collingwood and 9 others 11 1 Quote
CDW Posted March 5, 2023 #114 Posted March 5, 2023 There must be one of those jet engine test stands at or around Tampa International Airport. Every now and again, I can hear the jet engines being tested. robert952, mtaylor, FriedClams and 6 others 9 Quote Completed Projects: USS Fletcher 1:144 Scharnhorst 1:350 USS Independence LCS-2 1:350 1:32 J7W1 Shinden Interceptor/Fighter Fairey Swordfish Mk. II 1:48 Harbor Tug Box Scale Albatros D.V 1:32 Ala-Kart 1:25 Ferrari 250 GT California Spyder 1:24 S-100 Schnellboot 1:72 Mercury Capsule and Atlas Booster BR-52 Steam Locomotive 1:35 Triumph 3 HW Motorcycle 1:9 Scale F-16XL-2 Experimental Fighter Bomber 1:48 Rafale 1:48 F-15E Strike Eagle 1:48 Petlyakov PE-2 Soviet Dive Bomber 1:48 TBM3 Avenger 1:32 1931 Cadillac 1:25 Scammell Pioneer SV2S Heavy Breakdown Tractor 1:35 M-50 Israeli Sherman 1:35 Military Wrecker 1:32 Delahaye 135 1:24 Toyota Sard Supra GT 1:24 Enzo Ferrari 1:24 1970 Baldwin Motion Camaro 1:25 1966 Ford Galaxie 500 Stock Car 1:25 American LaFrance Eagle Fire Pumper 1:25 1940 Ford Standard Coupe 1:25 VolksWagen Dragster/Dune Buggy/Street Rod 1:25 Kawasaki Ninja H2 Carbon 1:12 Porsche GT-1 Evo 1:24 Scharnhorst 1940 1:700 IJN Akitsushima Seaplane Tender 1:700 HMS Hood 1941 1:700 Prinz Eugen 1942 1:700
Old Collingwood Posted March 5, 2023 #115 Posted March 5, 2023 I hear you brother - similar with me with real life has a habbit of getting in the way. OC. mtaylor, AJohnson, Canute and 6 others 9 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Canute Posted March 5, 2023 #116 Posted March 5, 2023 New B-52 engines? Old Collingwood, Egilman, FriedClams and 2 others 5 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
king derelict Posted March 5, 2023 Author #117 Posted March 5, 2023 2 hours ago, Canute said: New B-52 engines? 14 hours ago, CDW said: There must be one of those jet engine test stands at or around Tampa International Airport. Every now and again, I can hear the jet engines being tested. We are out in the swamp at the Pratt and Whitney test facility at West Palm Beach. This is the F35B STOVL engine. You can see the unusual vertically mounted inlet. That's on top of the Liftfan for vertical thrust. I'm the photo it's running in conventional more at full AB but I have one in STOVL with the nozzle bent down. On still nights I can hear it at home 25 miles away but the alligators don't seen to mind. 10 hours ago, Old Collingwood said: I hear you brother - similar with me with real life has a habbit of getting in the way. Yep, suddenly I'm working full time,trying to get a few house projects done and troy off to various appointments. It will make model time more precious when it comes around again Alan Egilman, GrandpaPhil, Old Collingwood and 3 others 6 Quote
Canute Posted March 5, 2023 #118 Posted March 5, 2023 Should have spotted the vertical inlet. Doh! 😁 Edwardkenway, Jack12477, mtaylor and 3 others 6 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
AJohnson Posted July 5, 2023 #119 Posted July 5, 2023 Hi Alan, I hope you are okay and not being worked into the dust! Hope you have time to get back to your Castle one day! Canute, mtaylor, CDW and 5 others 8 Quote Andrew Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) , HMAV Bounty - Caldercraft (1/64) Completed (Kits):- Vanguard Models (1/64) :- HM Cutter Trial , Nisha - Brixham trawler Caldercraft (1/64) :- HMS Orestes(Mars), HM Cutter Sherbourne Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight
CDW Posted July 5, 2023 #120 Posted July 5, 2023 7 hours ago, AJohnson said: Hi Alan, I hope you are okay and not being worked into the dust! Hope you have time to get back to your Castle one day! As hot as it has been lately, Alan may be second-guessing his decision to move to Florida. Feels-like temperature will reach 110+ today according to the forecast. Humidity is terrible. Just like you, I have been wondering how Alan is doing and hope all is well. Edwardkenway, robert952, FriedClams and 5 others 8 Quote Completed Projects: USS Fletcher 1:144 Scharnhorst 1:350 USS Independence LCS-2 1:350 1:32 J7W1 Shinden Interceptor/Fighter Fairey Swordfish Mk. II 1:48 Harbor Tug Box Scale Albatros D.V 1:32 Ala-Kart 1:25 Ferrari 250 GT California Spyder 1:24 S-100 Schnellboot 1:72 Mercury Capsule and Atlas Booster BR-52 Steam Locomotive 1:35 Triumph 3 HW Motorcycle 1:9 Scale F-16XL-2 Experimental Fighter Bomber 1:48 Rafale 1:48 F-15E Strike Eagle 1:48 Petlyakov PE-2 Soviet Dive Bomber 1:48 TBM3 Avenger 1:32 1931 Cadillac 1:25 Scammell Pioneer SV2S Heavy Breakdown Tractor 1:35 M-50 Israeli Sherman 1:35 Military Wrecker 1:32 Delahaye 135 1:24 Toyota Sard Supra GT 1:24 Enzo Ferrari 1:24 1970 Baldwin Motion Camaro 1:25 1966 Ford Galaxie 500 Stock Car 1:25 American LaFrance Eagle Fire Pumper 1:25 1940 Ford Standard Coupe 1:25 VolksWagen Dragster/Dune Buggy/Street Rod 1:25 Kawasaki Ninja H2 Carbon 1:12 Porsche GT-1 Evo 1:24 Scharnhorst 1940 1:700 IJN Akitsushima Seaplane Tender 1:700 HMS Hood 1941 1:700 Prinz Eugen 1942 1:700
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.