Jump to content

Recommended Posts

Posted (edited)

Yeah, Augie is right on that..... ropes look good Popeye, nice work....... Good luck on getting your new camera, there are a lot of great cameras out there........ Was look'n at your signature... noticed at the  bottom you say ..."other works in progress" ,last one says

multi build...not started yet... what is that all about, I thought you were doing multi builds all along!! :D  :D  :D

Frank

Edited by riverboat

completed build: Delta River Co. Riverboat     HMAT SUPPLY

                        

                         USRC "ALERT"

 

in progress: Red Dragon  (Chinese junk)

                      

Posted

Loving it!   So much to go through and use as inspiration (and so much to go through and learn from).    I have tried a few rope coils but they always come out looking like rope piles (would definitely get keelhauled for them that is for sure).

 

Dunno how ya do it - but keep on keeping on my friend; the adventure is fantastic!!

 

-Adam

-Adam

 

Current Builds

Santa Maria - Artesania Latina (1:65) POB

MayFlower - Model Shipways (5/32"=1') POB
Blue Shadow - Mamoli Revolutionary War Brigantine. (Fict) (1:64) POB (Recommissioned as the Kara June)

 

On The Shelf Waiting so Patiently

USRC Ranger - Corel (1:50) POB

18th Century Longboat - Model Shipways (1:4) POF

La Nina - Artesania Latina (1:65) POB

U.S Brig Syren - Model Shipways (1:64) POB

 

Completed Builds

Phantom NY Pilot Boat - Model Shipways (1:96) Solid Hull

 

Decommissioned Builds
(Time and conditions were not good to these. They have been cancelled =( )

Willie L Bennett - Model Shipways (1:32) POF
USRC Harriet Lane - Model Shipways (1:128) Solid Hull

 

Posted

Very nice Popeye! That's a tidy deck with neatly coiled ropes...

Padeen (Adeline)

"When there is a will, there is a way"

Completed build: Le Camaret - Constructo - static wood 1:35  (build log, gallery)

Current build (very limited modelling time at the moment...): HMS Fly - Amati/Victory Models - static wood 1:64 (build log)

Projected build: HMS Victory - Chris Watton's design - static wood 1:64 (when available..., no rush!)

Posted

I'll have to look back in you log Andy ......I wasn't really trying to mimic anyone's method...just the concept.   I don't do anything with acrylics,  although I just got three weathering kits...armor,  figures, and trains.  they are acrylics.......completely new to me.  originally, I wasn't going to do this.....I was just going to make them the way I usually do.   but this is the way they are in the kit...so,  I did them  thanks for the good word.....;)

 

I started on the Nordkap in August of 2010........my first build.  I haven't stopped since.   the AmericA will be my ninth.

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Looks great Popeye.  I just now got an opportunity to view your log.  Very nice.

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Posted

thanks Sherry & Padeen.......Adam & Frank!  I appreciate the good word  ;)

 

been kinda busy this morning,  so I Haven't been to the table yet.......but I will.   gee Frank........the multi build got you huh.....well,  I want to do three boats,  but I'll settle for two.  they are to be my next project build.....tell you more when I get to them.   funny....you didn't say anything about the  'in progress' list.  you'll see the other one soon. ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

What a fine lady of the sea you have nearly completed there Popeye; a very nice build.  Those flemish coils came up OK mate; nothing that a bit of drying time on the glue won't fix :).  I tend to make them up the same way I did in real life; I start with the standing end and make large concentric loops onto a flat shiny/slippery surface, working inwards (as a spiral) until the end bit is in the centre.  Then using my fingers to keep the whole lot flat I spin the coils CW/CCW (depending on the lay of the rope) and gradually tighten the coil - a very light coat of diluted PA and its done.  Works for me, but may need a little practice. 

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Posted (edited)

if one of these days Pat,  I find myself working on a ship with cannons,,,,I had better refine this, and in a big hurry!  :)   I don't have a bad idea......just need to leave it open, so they can dry correctly.   thank you very much....I value your insight  ;)

 

 

thanks John,  I appreciate the good word!  :)      

Edited by popeye the sailor

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Popeye,

 

Very nicely done.  The coils look great as does everything else.  Looks like in another day or two, this build will be ready for the display shelf.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

thanks Mark.........in a couple more knots,  as a matter of fact.

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

bassically,  the only things left to do is to finish the anchors,  and rig the jib's lower corner.   after the anchors were painted,  the chain was tied on using copper thread.

 

post-612-0-38221400-1369365672_thumb.jpg

 

post-612-0-94337000-1369365681_thumb.jpg

 

post-612-0-75330200-1369365690_thumb.jpg

 

the same was done for the starboard side.

 

post-612-0-05711100-1369365722_thumb.jpg

 

post-612-0-60523800-1369365730_thumb.jpg

 

post-612-0-58334800-1369365738_thumb.jpg

 

this finishes off the build........I had some fun with this one.   the kit is very well done......perhaps a little sub standard in a few areas,  but tweaking them,  to enhance them,  added to the challenge.  I also didn't want to add too much,  as I did in the last couple of kit builds.

 

post-612-0-34599200-1369365782_thumb.jpg

 

post-612-0-71475000-1369366208_thumb.jpg

 

post-612-0-54155200-1369366221_thumb.jpg

 

thanks to everyone who looked in and commented on this build....I really appreciated it greatly  :)

 

 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

thank you good sir  :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Yes... much applause... beautiful job, Popeye. post-76-0-55363700-1369367650.gifpost-76-0-55363700-1369367650.gifpost-76-0-55363700-1369367650.gifpost-76-0-55363700-1369367650.gif

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

thank you gentlemen.........my signature is hearby changed :)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Very very well done!!!   :cheers: And perfection in every sense.  She's incredible. post-307-0-19402800-1369369120.gif 

 

 

Posted

thanks Daniel and John..........I finished putting her in the gallery

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Very well done Popeye,

 

Congrats on an other beauty!

Maybe you can change your name into Master builder Popeye?

 

Anja has popup the champagne so lets drink!

cheers!!

 

animaatjes-sjors-94584.gif

Posted

thanks Anja,  Sherry and Sjors.   the admiral is such a good soul....she really loves what I do.   when she heard my elation,  she came over to look at her.......commented on how nice she looked.   then,  with three other hulls on the tables,  she asked me if I had another one to work on...........I should have said no  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Another beautiful build Popeye.  Congratulations are in order.  The sails make her spectacular!!!!!!!

 

And thank you for sharing her with us. 

 

Ever onward  :cheers:

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Posted

Congrats on finishing another fantastic build Popeye. You've only got five things going on right now so I'm sure we'll see another build log popping up soon? In all seriousness, your attention to detail and step-by-step build log have me wanting to add Billing's America to my kit inventory.

Posted

thanks Patrick.......they are a nice kit.   there are a couple of things you'll want to change,   but it does come to be a nice looking build.  thanks for the good word  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Ahoy Popeye :D

 

Congratz on the launch, she is a beauty 

 

Your work is an inspiration to newbies like myself who look to the day when we finish our first kits  

 On with the Show.... B) 

 

  J.Pett

 

“If you're going through hell, keep going” (Winston Churchill)

 

Current build:  MS Rattlesnake (MS2028)

http://modelshipworld.com/index.php?/topic/45-model-shipways-rattlesnake-ms2028-scale-164th/

 

Side Build: HMS Victory: Corel

http://modelshipworld.com/index.php?/topic/3709-hms-victory-by-jpett-corel-198/?p=104762

 

On the back burner:  1949 Chris Craft Racer: Dumas

http://modelshipworld.com/index.php?/topic/939-1949-chris-craft-racer-by-jpett-dumas-kit-no-1702/

 

Sometime, but not sure when: Frigate Berlin: Corel

http://www.corel-srl.it/pdf/berlin.pdf

 

 

 

 

 

 
 

 

Posted

Such a beauty.  Now we go sailing.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Posted

Well done Popeye! You can be proud of her, she is a beauty!  B)

Padeen (Adeline)

"When there is a will, there is a way"

Completed build: Le Camaret - Constructo - static wood 1:35  (build log, gallery)

Current build (very limited modelling time at the moment...): HMS Fly - Amati/Victory Models - static wood 1:64 (build log)

Projected build: HMS Victory - Chris Watton's design - static wood 1:64 (when available..., no rush!)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...