Mirabell61

On 2/21/2020 at 10:05 PM, Javier Baron said:

Thank you for your comments.

I have already painted the hull 

excellent build Javier !!

 

I love these small workboats

 

Nils

Hi Roger,

unfortunately no, They do turn on the new established axis, but have no interacting cinematic for feathering the scoops. I cant tell if the original Billing kit provided this option.

 

Nils

 

Roger, guess this is what you meant for feathering the scoops.....

 

A lovely sight Peta,

congrats, you built a wonderful model, it looks perfect.  Also I love that little great looking dinghi    

 

Nils

After paint job, now passengers and 6 head-crew boarded, ready for river- and lake cruise at Silkeborg

 

Nils

 

 

 

on port side the paddle scoops were mounted, facing to the wrong side. I dd`nt want to disassemble  the paddle wheel, as the failure is not so obvious to be seen anyhow

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Thank you Yves,

I experienced the same feeling,...... , now that the chance came, I just could`nt let it go by...

 

Nils

Hi Druxey,

thank you for your word

jes, thats true and whenever I saw an old unbuilt  kit of this one being offered (very rarely) the prices were so extraordinary high, but my mind still went pregnant with this thought  (someday the time may come ! )

 

Cheers, Nils

 

wish my hand would be more steady for the paint job on appr. 50 passengers...., but the hairstyles, shoes and other details will get touch-ups

 

 

Welcome to this topic Mark and Lars/Peter, and B.E.

and many thanks for your kind comments.

Also thanks to the "likes"

For this kit I`m missing the 2 bullseyes for sidewise in the front section of the hull, and the golden plover figurehead for the upper bow post. Alternative parts are now ordered. The stand looks quite flimsy, so I decided to make pedestals from brass / wooden candle holders with a shaped outcuts for the keel to fit into. Small M3 screws hold these pedestals  firmly to the keel. they will fit directly to the baseplate of the glass casing.

The two ( meanwhile come loose) paddle wheels were glued to the hull. Now both paddle wheels have become an brass axis between outside spashguards segments and the hull. I am intending to place crew and passengers on board, like I did wth the Bohuslän steamer. Its not easy to find the right scale figures, and there are so many non occupied benches. I placed the benches on the upper aft deck, turned around, now back to back 180°, so that the passengers will face the water side of the rivers and lakes for a better view. The roof of the front well also requires some additional holding posts, as the current ones are quite flimsy, and therefore the roof quite instable

Also the ships boat is not in correct scale, so there will be an alternative boat fitted under the davits....

 

Nils

 

this is the "old" stand

 

the wood / brass new pedestals

 

New pedestals fitted to the keel (they had to be low in hight, due to the limited glass case hight )

 

the new brass axis for the paddle wheels, also to make them turnable

 

crew and passenger figures, prior to painting job

 

Hi there,

all you steam-paddle-boat lovers

since I was a teen I had an eye on this lovely boat.  It is the long time already out of production vintage Billing Boats kit named "HJEJLEN" Golden Plover, German : Goldregenpfeifer.

A few days ago I could hardly believe my luck in finding this offered complete kit-built boat, on Ebay, a bit damaged, together with a suit-taylored glass case, so I invested a drive to the seller in the region of Bremen area, and picked it up.

 

After thorough inspection back home I determined the minimum of parts and components required to restore and overhaul the charming old lady. I shall show the sequences of recovery and restoration in the next weeks to come, here in this tread.

As this will be no complete new build, but certainly worth an shorter thread on this forum, as I`m sure that there is interest for this model by the one or other fellow member.

Credit goes to the late father of the seller who built this steamer many years ago. It is known to be the oldest live steam, still cruising boat with passengers in the waters of Silkeborg in Denmark

 

Nils

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

name giver birdie, Hjejlen, Golden plover, Goldregenpfeifer

 

 

Hi Mike,

congrats, you did a very nice job on the vintage Paddle steamer  

 

Nils

Beautiful work Peta,

also your pictures are wunderbare quality.....

 

Nils

Fantastic ornamentation Doris,

The best I`ve ever seen on a model.....   

Have a nice and enjoyable Christmas with your family

 

Nils

verynice progress Geert,

I wish you and your family a pleasant Christmas time...

 

Nils

Doris,

your work is fantastic, its a pleasure to follow....

 

Nils

Beautiful work Dan,

its a wonderful model !

 

Nils

Lovely Toolmaker`s work Michael,

you`re doing a fantastic job !!

 

Nils

Congrats Bob,

 

a great looking Boat.....

 

Nils

A very good looking plating job Svein Erik      

 

just a question, how thick is the carrier copper tape you have chosen ?  (without paperback, without glue film)

 

Nils

Excellent rigging and sail making Peta,

wunderbar !

 

Nils

Thanks for your interest in my "favorite tools" and for your greeting Steve....

 

Nils

So true Geert   😏......

 

Nils

Hi Pete,

thats the impression, after the vacum cleaner was at work, you should have seen it before and an angry wife, just after a sanding and table saw session. All shoeprints all over the carpets !

 

Meantime I have received some blocks and cotton cloth for sewing the sails, brown and red, or will do two of the five sails in red. I still have some Morope  for the bolt ropes

 

Nils

 

Many thanks to Steve, Johann, Denis and Piet,

also thanks to all the "likes" for looking in

 

It must have been two weeks or more since I posted last, and your kind comments encourage me to carry on, the steam was a bit out of the kettle, and I do`nt realy know why....

Instead I spent some hours with my Trainz 2009 train simulator, a program I have on my PC. There is a favourate download add-on I have saved there, it is a historic logging line, down in breathtaking Murchison county, New Zealand.

This is covering standard gauge- and narrow gauge tracks in mountains,  over many scary wooden threstles over rough canyons with animated waterfalls, and along flowing rivers to get to the logging camps, with interactive log-loading and dumping functions.

Best of all are (amoungst many other vehicles in the train park),  the old geared puffing locomotives, like Shay, Climax, Heisler, etc.

 

Steve,

a very nice comment of yours, much appreciated. Yes, much is with hand tools, and because I neigther own a lathe nor a milling machine, I always have to evaluate how the job can be done altrnatively.

With pleasure I`ll provide a little overview of my favorate tools in use....... (ref. to the enclosed pics)

 

Johann,

thank you very much for nice comment, much appreciated, am pleased you like the details...

 

Denis,

thanks for your nice comments, am pleased you like the details. I`m stuck a bit with the deck in the moment, but will groove myself in and carry on....

 

Piet,

thats a very nice comment, and I`m pleased you like the workboat...

 

Nils

 

Pictures:

I have a small room in our cellar which I use for rough-work cutting, sawing, grinding, glass casing assembly, and wood storage.

The assembly work, designing, soldering, and finer fitting sub assemblies is done in my other, more office-like  hobby room, where I also display the finalized models in glass casings

 

this is very old kitchen furniture that could be saved from dumping many years ago, here are my favourate tools

 

this table saw is my latest achievement, a birthday present of my son in Oct. this year

 

this multy use sander is very much in use, and I ca´nt miss it anymore...

 

for sharpening chissels and drills

 

the small IXO Bosch Drill is very much in use, i`ts usualy for taking up hexogonal headed bits, and here also a bit for spanning small drills  0,5 - 6 mm for all purposes...

further a a sander belt ( cost much less than a Proxon or so), but is a pofessional tool

further two grinder / sanding tools for appropriate range of bits

And of course the good old  hand jig-saw

 

odd plankes and dowels, bits of wood, ply bits and remaining plate rests, etc. are saved for future purposes....

 

 

 

also all sorts of brass profiles and tubes are saved

 

 

 

drawings, design evaluations etc. are saved in card tubes

 

 

Nice build Pete,

also the truck looks great   

 

Nils

I love the precision of your work Daniel,

The wonderful framing work combined with top accuracy of your (single planking  !! )  hull skin is high skill artwork  

 

Nils

Super build Dan !

those boats, rafts, davits and all those fine detail look great, very nice work   

 

Nils