mtaylor

Those of you who do the PE thing on ships have my undying admiration. I get a headache and eyestrain just looking at the pictures.

Stunning work, Nils. She looks perfect.

Between the brass pulleys and the red trim, she's starting to pop right off the screen, Denis.

Incredible, Piet. Just incredible.

I'm re-reading this tour-de-force of a build and am still in awe after reading it again . I love the details like the way you made the doors, Alex.

I'm looking forward to your article, Dick. Looking over your build log says you'll do a great job on it.

This maybe an unusual way of framing a hull, Amalio, but the result show that its a good method.

Good points all around. Sometimes it's just best to let them hit the wall. Then be there to help them off the floor. We all learn, sometimes from words, other times from running into the wall.

Thanks for all the "likes", comments, and "just having a peek in". Update time.... All three decks now have their clamps in place. I've checked from side to side and they're close but need a bit of touching up with a file to get each side level with the other. I've also started making up the beams for the lower deck. The pictures show the first two beams shaped on the ends and also sitting in place. I'm still planning on an almost full lower deck with the following exception.. the aft end planking will end after the partition and door for the gunroom. I may change my mind as get more into this area but I'd be winging it to put any thing after that wall basically be sheer guesswork including the beams. There's (according to the plans) two "cabins" in the gunroom but I'm thinking they're storage. The hull in the area takes on some serious curves. As I said, I may change my mind once I get into the deck planking. I'll also put in the mizzen mast step, the main and fore mast partners, the oven, and the three hatches (two have gratings). There will also be the cabins (empty), bread rooms, and storage rooms along with the forward partition that's behind the foremast. The anchor point for the bowsprit will need to be installed and the opening in the bow opened and shaped for the bowsprit on the beakhead. Anyway, here's the pics... I'm open to critique, ideas, and thoughts as always. Have a great Friday and weekend.

John, I'm happy to have been of help. We all learn from each other here. I'm just glad you found what works for you.

Hmm... I've never had success with the boiling or microwave way of bending. I soak and then use a curling iron... rinse and repeat as needed. I tried Chuck's method and some woods worked well, others, not so much. Plus, I don't have space to work with the heat of a heat gun. My workshop is pretty packed. The key is to heat until it's pliable and then bend and lock into position until cool.

It's a pity the owner of the real ship can't see this, or hasn't seen this.... Most impressive, Patrick.

I would think the yard dogs deserve a tot or two of rum or perhaps, being French... wine. It seems a plan is coming together.

That is one fine looking model, Dick. Your research and efforts are really paying off.

Lazy, Denis? I hate to be around for a busy time in shop. Sorry to hear the car is giving you fits, but the shipwork looks great... if that's any consolation. Edit.. we were cross-posting. That gasket looks like the real thing.

Sweet work, Mick.

HI Kurt, I'm not sure what you mean by "the best/preferred way to proceed"???? There's planking tutorials pinned here: http://modelshipworld.com/index.php/forum/14-building-framing-planking-and-plating-a-ships-hull-and-deck/and in the database here in the Planking and Framing section:http://modelshipworldforum.com/ship-modeling-articles-and-downloads.php I hope this is what you're looking for.

Have a great trip, Pat. Endeavour is looking fantastic in her home for now.

Nice looking fleet there, Sjors.

Lovely Sjors. The second layer should go perfectly now.

I don't know if he's abandoned this build or if life really got in the way. His last login was the day of his last post.

You could be right on that Joel. As I understood it, it was needed for the first load (if the guns were unloaded) and then if there was a mis-fire or if for some reason it didn't recoil. It would make sense to me, not have excess clutter on the deck.

Will, There's a scale "ruler" shown in your last photo. Check it with your ruler and see if it measures up, so to speak. If so, that would be the fastest way to see if it's the plans or the cutting that's off.

Michael, They do have inhauls. Depending on the navy and even the captain, they might or might not be rigged until actually needed to run in a gun. They were usually not rigged until the call for "action" except for maybe an inspection. They would be something else to trip over.

I've seen quite a few posts referencing that these exist and apparently some are having a hard time to find them. I hope Chuck doesn't mind but I'm putting the links here.