Jump to content

L'ARTÉSIEN 1762 by hjx - 1:48 - 64 gun frame model by cnc


Recommended Posts

Hello to all!

For my poor English ,the following was translated by software and maybe have some grammar or other mistakes .

The plans of L'ARTÉSIEN were purchased from France in last year,the ship is so beautiful and i want to make it(into a ship model) by cnc.

 

00001.thumb.jpg.750360d39d212f46b03e3dcca1f444b5.jpg

 

00002.thumb.jpg.865945a68b2100857d10a4bd9cee3852.jpg

 

First I scan the drawings,then make it into 3d model or 2d Vector graph,Then NC engraving,Including 2D and 3d kits for example frames/figurehead...

My project starts from the stem and the main material is pear and jujube...

This process is almost all CNC machining, manual only assembly and polishing...

 

 

011.thumb.jpg.5e4c21af05f0f304e3d38d273731dafa.jpg

 

054.jpg.c9307b9bc0ea7882b68d1618da536600.jpg

 

055.jpg.5262faa83aaf597ef29c1714ac5cfd33.jpg

 

056.thumb.jpg.9055de9780413ffaeab4bca83f9151e5.jpg

 

some photos of  Actually produced...

 

58cd30e805e94_webwxgetmsgimg(8).thumb.jpg.07fec1cffd3eb8560a2510dff880c7e2.jpg

 

58cd30e373b5a_webwxgetmsgimg(6).thumb.jpg.6731df92f291daad5f7cc7d76715ea62.jpg

 

58cd3151afef4_webwxgetmsgimg(12).thumb.jpg.b407fdd50c37be2eb3ff19855650a5fd.jpg

 

58cd3148d68a1_webwxgetmsgimg(11).thumb.jpg.47eefb3e9797df97ae00967615ec5395.jpg

 

58cd31591226d_webwxgetmsgimg(15).thumb.jpg.6da6905570d8d216134fbe1e72ad076d.jpg

 

58cd3156f27f7_webwxgetmsgimg(13).thumb.jpg.117125620f48cb037cb97b447a721705.jpg

 

58cd31c53c6ec_webwxgetmsgimg(1).thumb.jpg.caa1998c37b49928baabe77cdb74a0c9.jpg

 

mill on double sides

 

112.thumb.jpg.8f54a7e327025a223e0fa4e2c0d0fb4a.jpg

 

114.thumb.jpg.ae4fa772b8c6d46eb825a1de0f37e7c8.jpg

 

116.thumb.jpg.f3deb03c0d4501a3b26f212a8723a700.jpg

 

118.thumb.jpg.9120875399993146a5d35ed2a4adcae0.jpg

 

120.thumb.jpg.2da9c138ecafa38f4f66d024bf1f6b25.jpg

 

125.thumb.jpg.65ffe879a75a602f9f8be553a78132c9.jpg

 

The two faces are basically the same

 

121.thumb.jpg.85ba17b11b390b4744f32224ce867171.jpg

 

122.thumb.jpg.6448bd99e4df27360d8229f3804a4a37.jpg

 

Double sides milling of bow special parts...

 

The following is "no bridges"

172301.thumb.jpg.d5a84401e5bd2a027ca363a8bf4a55e6.jpg

 

172302.thumb.jpg.012e5ae00ffab411229564d93e31fd52.jpg

The previous production was "have bridges" As shown below...

 

58cd33bf135ea_webwxgetmsgimg(7).thumb.jpg.6d3319b73a18a6d2f14a3e0f1fc9828b.jpg

 

58cd33c214b1f_webwxgetmsgimg(8).thumb.jpg.6eb95f1ccd1e8d75f44b11818060329a.jpg

172303.thumb.jpg.2df76883343f77725fd83b77bfb5bfde.jpg

 

172305.thumb.jpg.b4c3cf7dabe8a49cbf9e0278e7b581a4.jpg

 

172306.thumb.jpg.ae5461eb51d92b270522b23fd78d1402.jpg

 

pre-assemble...

 

021.thumb.jpg.a5b07d3ddddd733e22cc9be9daa139ad.jpg

 

022.thumb.jpg.ea32b4a30dd51605888f2903664f805b.jpg

 

024.thumb.jpg.784b43f9e8bfb9e1c6b1f11901c07394.jpg

 

026.thumb.jpg.8e15e3c802bf268a2a5e4a67a5ff1146.jpg

 

027.thumb.jpg.7f8801f24722cd6539ade607494f9a2d.jpg

 

58cd368460c12_webwxgetmsgimg(16).thumb.jpg.f5ba8c1de2cee2cafbc9d7e7a33e5af3.jpg

 

The figurehead ...

3d model

 

062.thumb.jpg.a219f6e5630ca0e2f08edaf9f19e8057.jpg

 

063.thumb.jpg.ba27eb1bfffc0207bc68a8122b9d89cf.jpg

 

067.thumb.jpg.4676917af47e3cb028177a76cdb804b3.jpg

 

071.thumb.jpg.8e11450729699d0d7f4b8ab5a9076761.jpg

 

072.thumb.jpg.f389f8607eb948a84cceddf351a79a60.jpg

 

098.thumb.jpg.6c734ecc6b787b221b2d02c6f904624a.jpg

 

099.thumb.jpg.d93627f785fdd943c69a609fb2b2af02.jpg

 

100.thumb.jpg.c24e9587e5da05f03cef207c4d92ec5d.jpg

 

101.thumb.jpg.f3ae51a3f2d8751f340dd60462c18759.jpg

 

102.thumb.jpg.1e5d13eb63e6624a84d56bce0a123073.jpg

 

Although not very similar, I have tried my best...

NC machining programming and simulation

 

107.thumb.jpg.7c8c6bdc6c3387b5dbe94dfb3eb3f195.jpg

 

109.jpg.3706af0e8c6de3cfdeb33bba20122dd3.jpg

 

110.thumb.jpg.3b18d16755cccb077c2f06729c3c8a2e.jpg

 

111.thumb.jpg.599905b4fa6ad1f18d3100857026b700.jpg

 

Preparation materials

 

58cd39766470f_webwxgetmsgimg(18).thumb.jpg.37822deafb10b0dcac9f2d13c04a9904.jpg

 

58cd397939e33_webwxgetmsgimg(19).thumb.jpg.d1841ee486cc7f106023446aa5e9999d.jpg

 

58cd397bf3d2c_webwxgetmsgimg(20).thumb.jpg.df4365f32ecfe426d62ec789054c3898.jpg

 

It will take some time to process the finished product

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

095.jpg

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Thanks Dan and Mark for your attention.

 

"Fascinating to say the least.  How long did it that the CNC to make the figurehead?"

 

Some areas that not carved by maching need secondary processing, it took me total about 18-20 hours to complete a primary processing- 0.8mm millcut/0.05mm stepover.

 

Link to comment
Share on other sites

  • 2 weeks later...

Thanks Jeronimo,and thanks everybody.

Maybe I will stop the buildlog for a while,I promised the request of a member to development of a private drawing of the frame and make its sculpture, including the figurehead.

This is the last update of the production of the figurehead.

After the figurehead is fixed, the support is finally removed.

58fd4e4e8209d_-2.thumb.jpg.e3c73020ea59a603acb2a3cd993d0026.jpg

 

58fd4e527659e_.thumb.jpg.28e36b4b34f6dd39c2502f52aeaed43a.jpg

 

Remove the fixed softener...

IMG_20170417_012750.thumb.jpg.aff52d81dbcc2d677eebc150f0e46e75.jpg

IMG_20170417_012817.thumb.jpg.385ff754294f4ce0101890adb6291ae6.jpg

IMG_20170417_012831.thumb.jpg.4c74df0656ac396f9df0349d0c6751b5.jpg

58fd50bb287b7_-1.thumb.jpg.bd3fc85c88ec37d62ee423ea85f4e1c0.jpg

Finally, It's also need to be manually modified/polished and so on...

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Although some busy, I still took the time to make the fifth figurehead, a little bit of regret is that some of the flaws of wood

Cn processing out of the sculpture is quite accurate, basically the same as the design,because it was not polished yet, so looks more rough.

001.thumb.jpg.6bfcb9462a92284e26a2fdad0a25145e.jpg

 

03.thumb.jpg.4dac0e7221c042448b91e3fc65de2453.jpg

 

04.thumb.jpg.03e686e07abdad9d744f4c95fabd49ce.jpg

 

05.thumb.jpg.fe8bde3e75d42baee0da4f099ea4a75e.jpg

 

07.thumb.jpg.5c17fa531565cb5d9c188deb296deabb.jpg

 

08.thumb.jpg.ff7e5e81dbde9fe1fc725ad7885295f2.jpg

 

09.thumb.jpg.5dbf38ad3e9d1b05bb1272d93e17e0f4.jpg

 

10.thumb.jpg.3cd1dfade4877a96630c126444bec0a5.jpg

 

11.thumb.jpg.2432a914cbdc7711fbd03028981e1d3f.jpg

 

06.jpg

Link to comment
Share on other sites

  • 1 month later...
  • 4 months later...
  • 2 weeks later...

Thanks  Erebus and Terror   Nils   Mark     Gaetan Bordeleau    and   Hubac'sHistorian!

 

I finished second steps, because my machine is 4 axis, so many parts need to be engraved again.
In general, Maybe i can get better sculpture by using new model new processing program and the V type milling cutter.

1963738208.thumb.jpg.4f96bf32559dd641c1a41c4e6f8ef405.jpg

 

747344746.thumb.jpg.9065682468ce587c8b006001df58ce3d.jpg

 

83875845.thumb.jpg.67076294584fe8686a3bd869694ed1b3.jpg

 

619542058.thumb.jpg.46411cdb6840bad241888ab62ace3fa4.jpg

If the eyeball is to be engraved, 0.1mm V type milling cutter is needed, but I use 0.3mm milling cut now.

 

The rssult of the left arm after additional carving.

 

1347174999.thumb.jpg.bb37f8ab85f43c6e098cca0c125ef847.jpg

1426620112.thumb.jpg.d5c3d6522cca2978291168c21d8b1593.jpg

Edited by hjx
Link to comment
Share on other sites

HJX, the milling results are really pretty incredible! Even with just a small amount of handwork, you could finish this carving on a level that most would really labor to achieve by sculpting alone.  This is really a fascinating process that you use to make models.

 

I’m glad to see you are still plugging away at it, and I look forward to your progress.

 

Happy Holidays to you and all on MSW!

Edited by Hubac'sHistorian
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...