Landlubber Mike Posted November 30, 2018 #31 Posted November 30, 2018 Beautiful work Marsalv! Thank you for sharing your build progress and techniques! I bought the monograph off eBay years ago when it was listed for a great deal, and have always wanted to build it once I gained more skill and experience. It's a relatively plain ship compared to some of the other Ancre subjects when it comes to ornamentation, but I think it's a beauty. Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)
dvm27 Posted November 30, 2018 #32 Posted November 30, 2018 Lovely work, Marsalv. Assembling them off the model in the jig you've created certainly simplifies the process somewhat. druxey 1 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
marsalv Posted February 2, 2019 Author #33 Posted February 2, 2019 Preparation of parts for frame production - it was necessary to cut approximately 700 pcs of individual parts. MEDDO, Saburo, paulsutcliffe and 18 others 21 Quote
marsalv Posted February 16, 2019 Author #34 Posted February 16, 2019 I bought a "good helper" for producing of the frames. I have lost more than three months because I have found an untrustworthy supplier and I have had to look for another one but I am still satisfied with the result. The frames are ready for the beveling. bruce d, Landrotten Highlander, Dubz and 19 others 21 1 Quote
ChrisLBren Posted February 16, 2019 #35 Posted February 16, 2019 Interesting technique !!! Really nice progress Chris mtaylor and KentM 2 Quote
dvm27 Posted February 16, 2019 #36 Posted February 16, 2019 Looks like you have little to no fairing to do amidships. I assume that's not an 8-axis machine. Imagine havinga mill that could also cut the changing bevels of the frames! mtaylor, druxey and KentM 3 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
druxey Posted February 16, 2019 #37 Posted February 16, 2019 Oh, don't you wish, Greg! paulsutcliffe, dvm27, PeteB and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
marsalv Posted February 23, 2019 Author #38 Posted February 23, 2019 To Dirk - I bought this machine from one Czech company - https://cnc.inshop.cz/cnc-frezky-a-routery/mala-modelarska-cnc-frezka-pro-gravirovani-a-ryti. This company is co-owned with one man from German and milling maschines are made in China under inspection people from German. So I hope the quality of production will also be under tight control. Milling speed is in my case cca 15-20 mm/s, time required for one frame production is aprox. 7 minutes (milling maschine makes 10 passes). Beveling was done in two phases, rough sanding was made with help of Proxxon maschines, fine sanding was made manually with sanding paper glued on the wooden sticks. Beveled frames are temporarily situated on the keel. Richard Griffith, marktiedens, JOUFF and 38 others 41 Quote
Jorge Diaz O Posted February 23, 2019 #39 Posted February 23, 2019 (edited) wow...Gran trabajo señor, increíble calidad. Edited February 23, 2019 by Jorge Diaz O KentM 1 Quote -HMS Tritón 1/48 1773 en scracht (TERMINADO) -HMS Winchelsea 1/35 1764 full scracht (EN PROYECTO)
the learner Posted February 24, 2019 #40 Posted February 24, 2019 Wow is right! So much progress in a short time, I see the framing is looking great! mtaylor 1 Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
marsalv Posted March 7, 2019 Author #41 Posted March 7, 2019 Thank you guys😉. I began with bolting of the individual frames, first aft and first front frames are glued now to the keel. Dubz, paulsutcliffe, KARAVOKIRIS and 33 others 36 Quote
ChrisLBren Posted March 7, 2019 #42 Posted March 7, 2019 Nice work !!!! mtaylor and paulsutcliffe 2 Quote
druxey Posted March 7, 2019 #43 Posted March 7, 2019 Agreed!!!! mtaylor 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
marsalv Posted March 15, 2019 Author #45 Posted March 15, 2019 All frames are glued to the keel, now is time to sand the inner part of the hull. Richard Griffith, mtaylor, minimini and 37 others 40 Quote
ChrisLBren Posted March 15, 2019 #46 Posted March 15, 2019 Sweet !!!!! paulsutcliffe, druxey and mtaylor 3 Quote
marsalv Posted April 4, 2019 Author #47 Posted April 4, 2019 The inner part of the hull is sanded, so I started to instal the filling keys between the frames. tadheus, dvm27, Vivian Galad and 31 others 34 Quote
ChrisLBren Posted April 4, 2019 #48 Posted April 4, 2019 Nice work - thanks for these close up shots of your keel - these are really helpful ! Have you decided whether your adding the extra gun ports or modeling her as launched ? Chris mtaylor 1 Quote
the learner Posted April 5, 2019 #49 Posted April 5, 2019 nice pictures, progressing nicely! mtaylor 1 Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
marsalv Posted April 9, 2019 Author #50 Posted April 9, 2019 Thank you guys. Chris - I will propably build the ship without adding the extra gun ports. So rest of filling keys is added, the groove for bilge water is made, the whole hull is sanded and prepared fot the next task. Mike Y, Bluto 1790, archjofo and 35 others 38 Quote
KeithAug Posted April 9, 2019 #51 Posted April 9, 2019 Wonderful work, really exceptional - and i do like the radiator in the workshop, must get one soon. mtaylor and paulsutcliffe 2 Quote Keith Current Build:- Cangarda (Steam Yacht) - Scale 1:24 Previous Builds:- Schooner Germania (Nova) - Scale 1:36 https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/ Schooner Altair by KeithAug - Scale 1:32 - 1931 http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702 J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration. http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029 Other Topics Nautical Adventures http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846
ChrisLBren Posted April 9, 2019 #52 Posted April 9, 2019 Looks terrific Marsalv I am also thinking of not adding the additional ports and build her as launched. I still need to finish my keel assembly ! Chris mtaylor 1 Quote
PeteB Posted April 10, 2019 #53 Posted April 10, 2019 Hi Marsalv - Can't help but keep going back and admiring your work from start to date - just beautiful clean joinery especially the way you have cut the limbers - I was wondering if you could let us in on the secret ? It looks like some sort of collar around a mill bit which is guided by the batten and limits the depth ? I can't work out if its stationary or rotating with the mill bit - Could you enlighten me please. Cheers Pete Jorge Diaz O, mtaylor and Saburo 3 Quote
the learner Posted April 10, 2019 #54 Posted April 10, 2019 Your framing is beautifully done, flawless! mtaylor 1 Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
marsalv Posted April 11, 2019 Author #55 Posted April 11, 2019 To PeteB - you basically answered yourself - see picture. bruce d, mtaylor, muratx and 5 others 8 Quote
marsalv Posted April 11, 2019 Author #56 Posted April 11, 2019 Next parts - keelson, sternson and stemson. ChrisLBren, JpR62, Bluto 1790 and 29 others 32 Quote
PeteB Posted April 11, 2019 #57 Posted April 11, 2019 5 hours ago, marsalv said: To PeteB - you basically answered yourself - see picture. Hi Marsalv - All today I have had all sorts of high tech options from double ball races to modified live centers fitted with a mill bit flying around what grey matter is left - I should have known to first apply the old standby - KISS. - Thanks mate for putting me out of my misery - cheers Pete mtaylor and paulsutcliffe 2 Quote
marsalv Posted April 23, 2019 Author #58 Posted April 23, 2019 Deck clamps preparation. Mike Y, JOUFF, Peta_V and 21 others 24 Quote
Dowmer Posted April 23, 2019 #59 Posted April 23, 2019 Marsalv, excellent joinery. What kind of wood is it and how did you manage to make a thick piece of wood bend around the bow like that? Saburo, mtaylor and KentM 3 Quote Able bodied seaman, subject to the requirements of the service. "I may very well sink, but I'm damned if I'll Strike!" JPJ My Pacific Northwest Discovery Series: On the slipways in the lumberyard Union, 1792 - 1:48 scale - POF Scratch build 18th Century Longboat - circa 1790 as used in the PNW fur trade - FINISHED Future Builds (Wish List) Columbia Redidiva, 1787 HM Armed Tender Chatham, 1788 HMS Discovery, 1789 Captain Vancouver Santiago, 1775 - Spanish Frigate of Explorer Bruno de Hezeta Lady Washington, 1787 - Original Sloop Rig
marsalv Posted April 26, 2019 Author #60 Posted April 26, 2019 Hi Dowmer, deck clamps are made from pear wood. I use the old bender (first picture) for wood bending. Not the shaped end, but the heating tube to which I place a water-soaked cloth. Steam from the water heats the wood and makes the bending easier. The deck clamps are attached to the hull. Now I am going to finish the stern. druxey, FriedClams, Tigersteve and 24 others 27 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.