Jump to content

HMS HOOD by Salty Dog - Trumpeter - 1/200 - PLASTIC - w/Pontos PE


Recommended Posts

Hi everyone,

Not a good night! Lots of fidgeting and reworking. Pontos supplied PE for the window frames shown here:

surgery2.jpg.7f211505f2168e75c804378b84d0890c.jpg

I don't just like to put that up there without removing the plastic and making a "room", so I removed the entire area.  When I went to do the same with the rear windows, the window "frames" pretty much got destroyed.  No way to file all those little squares and make them look even. So I got rid of the frames and made my own with some plastic strips.  Here's the result:

IMG_0088.thumb.JPG.8b6f95b3bfe49b6bb65d04312396c24c.JPG

IMG_0089.thumb.JPG.fca28bc8d5c17879ce0cdd42d3d753c2.JPG

Not great, but a hell of a lot better than leaving them closed and looking like...plastic. 

The next parts also required lots of surgery:

surgery.thumb.jpg.e20518da7d3c7a0bb61b46917cd2b834.jpg

And here's the stuff painted without all the pretty stuff yet.  That's tomorrow.

Hope you like!

Ed

IMG_0093.thumb.JPG.c4d067efc0f3be940b99a2c9430b1c4c.JPGIMG_0090.thumb.JPG.776df6373a10c975dc516033c3e45e24.JPGIMG_0092.thumb.JPG.f0d8ccc6267df76b4ecb6faed193d65b.JPG

 

 

IMG_0091.JPG

Edited by Salty Dog
Link to comment
Share on other sites

4 hours ago, CDW said:

What paint are you using for your black parts? Looks great. I like those frames you made.

Tamiya semi-gloss black. X18. 50/50 with alcohol. I like Model Master too, but I premix the Tamiya into small "dropper" bottles, and when I need a little, I just squeeze a tiny bit into the airbrush cup. When I'm done, I just flush it with alcohol and it's good to go. I used to hate airbrushing due to the constant cleaning, taking it apart, using tools and stuff to totally clean it. With the Tamiya, it's like new after every quick flush.

Thanks about the frames.  I very rarely do anything like that. But after attempting to file the "windows" out, the frames looked mangled. Not so bad now.

Link to comment
Share on other sites

Yep, Tamiya is great, use it all the time myself as well. If you don't mind a little longer drying time and want a smoother finish such as in a gloss finish, reduce Tamiya acrylics with Mr Color Leveling Reducer. Works wonders. But for my day-to-day painting which most often are flats, I use alcohol to reduce as well. The only down side to Tamiya acrylics are their lower color selection. I don't mind mixing their paints to get the colors I need, but I need to make a laminated card of some kind to write down the formulas.

Link to comment
Share on other sites

42 minutes ago, CDW said:

Yep, Tamiya is great, use it all the time myself as well. If you don't mind a little longer drying time and want a smoother finish such as in a gloss finish, reduce Tamiya acrylics with Mr Color Leveling Reducer. Works wonders. But for my day-to-day painting which most often are flats, I use alcohol to reduce as well. The only down side to Tamiya acrylics are their lower color selection. I don't mind mixing their paints to get the colors I need, but I need to make a laminated card of some kind to write down the formulas.

I agree. I wish they had more colors. Another thing that I've done, just to show how much a really gaf about accuracy, if I'm painting something big, like these huge 1/200 hulls, the airbrush doesn't cut it.  And the amount of paint required is huge.  I go to Home Depot and get a color close to what I want in a rattle can, and all it takes is one.  Look at the first picture on this blog of the hull. All done with that paint. I have a self filled with rattle cans that "come close".  Good enough for me.

Edited by Salty Dog
Link to comment
Share on other sites

23 minutes ago, Salty Dog said:

I agree. I wish they had more colors. Another thing that I've done, just to show how much a really gaf about accuracy, if I'm painting something big, like these huge 1/200 hulls, the airbrush doesn't cut it.  And the amount of paint required is huge.  I go to Home Depot and get a color close to what I want in a rattle can, and all it takes is one.  Look at the first picture on this blog of the hull. All done with that paint. I have a self filled with rattle cans that "come close".  Good enough for me.

NAPA Genuine Auto Parts stores that have a paint department can mix and fill any color you want to choose from (their color chip book) into a spray paint can. The cost is reasonable as well. Sometimes when you're trying to match a color, take a sample with you and give them a try. 

Edited by CDW
Forgot to add NAPA
Link to comment
Share on other sites

I'm going to bight on a stupid question, what type/kind of alcohol are you thinning with, thanks

 

Harley 

Cheers, Harley<p 

Under Construction:    USS Yorktown CV-5 1/200 by Trumpeter                                

Completed:              USS Curtis Wilbur DDG-54 1/200 by ILoveKit

                                USS Atlanta CL-51 1/350 by Very Fire 

                                Liberty Ship John W. Brown 1/350 by Trumpeter

                                HMS Spiraea K-08 1/350 

                                 USS Arizona BB-39 1/200 by Trumpeter/Mk1 Design

                                 HMS Sir Gareth 1/350 by Starling Models

                                 USS Missouri BB-63 1945 1/350 by Joy-Yard, 9/11/21

                                 USS Indianapolis CA-35 1945 1/350 by Trumpeter

                                 USS Kidd DD-661, 1945, 1/350, on The Sullivans kit by Trumpeter

                                 USS Alaska CB-1, 1/350, Hobby Boss, Circa 2/1945

                                 US Brig Syren 1/64 Model Shipways, Wood 

Started, On Hold:  Frigate Confederacy 1/64 Model Shipways, Wood

Link to comment
Share on other sites

Hi again,

Very frustrating night. If you have never worked with PE, you must prepare for some very annoying and unavoidable events. If you have, you'll know what I'm talking about.

PE is extremely fragile.  9 out of 10 parts must be folded, at least once. If you are not extremely careful and fold it the wrong way, chances are very good that when you correct it, the bend is going to break. It almost always does. Even if you barely fold it. Be prepared to do some repairing.  Here's an example:

IMG_0096.thumb.JPG.a4ef87830e9454b91a9d383b8d239415.JPG

The white plastic pieces are for reinforcing. You are expected to glue that extremely thin metal down. There is hardly any surface contact, so I add small pieces just to give it more contact.

Also, be prepared for parts not fitting all the way. I don't know if it's the PE or the actual model, but often enough, you WILL have to do some modifications in order for the parts to fit.

Unfortunately, such as with this piece, it's not possible. If you tweak one area, you'll have to tweak another, and another, and it just becomes a mess.  This part was so complicated in its assembly, that there were several areas that did not fit precisely.  Like this:IMG_0098.thumb.JPG.94848a62d2cce4347bc4801e77d61914.JPGIMG_0095.thumb.JPG.52a95aff534248c08df2731916973706.JPG

By the way, sometimes you'll see some awful gluing or painting.  These areas are impossible to see once the model is finished....most of the time haha. I just hate wasting time knowing that something will be hidden for good once it's done.  I used to like building model airplanes. You would put together half the fuselage, detail it to hell, with radios and wires, and the seats and controls, and paint it pretty, and then....promptly slap on the second half of the fuselage and COMPLETELY hid all the work you just did! I continued building them, but I learned not to waste my time on the guts.

Anyway, here are 2 more pics of the progress:IMG_0097.thumb.JPG.27510a7e5cb7d93d923bb62077127521.JPGIMG_0099.JPG.6916cb02114d490aa3dd84625964fbf1.JPG

Edited by Salty Dog
Link to comment
Share on other sites

hello Ed........just reviewed the super job your doing here :)   I've heard of the concept your building her in........basically,  it highlights the added detail and allows the viewer to see a larger scope.  I have a set of 1:350 PE for the hood.......I've been having fun matching up the different parts your working with ;)   truly great job.......gonna be a monster when it begins to come together!  taking a seat :) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

7 hours ago, ragove said:

Beautiful photo etched work. When I tried PE on a plastic ship model I made a bloody mess of it and threw the kit away.

what is the secret?

Thanks!  Lots and lots of patience. It doesn't help that the manufacturers supply such crappy instructions!  Half the time, you're left to figure stuff out on your own.  When you're done building the kit, there are TONS of parts left over, because no mention of them was made. For the amount of money that one pays for these things, you'd figure they would give you lots of written and photographic instructions.  At the very least, lots of illustrations and diagrams.  As it is, I NEVER use the paper instructions they give, you.  I either download the PDF or convert them to PDF and use my computer screen in front of my work area as a magnifying glass.

Also, you really need some good tools. Most of all, some good tweezers. Some good bending pliers. No need to go buying some of the expensive stuff such as this:image.thumb.png.c5ce5590281fe06f90ad346c0a8b73fa.png

But then there are tools that you just simply need. Rolling the PE is truly a nightmare without the right stuff.  I found this last night and I HAVE to buy it:

image.png.f3914950440eeee0a795012f47b850b0.png

No matter how carefully you try to "roll" PE, without something like this, it comes out like crap!  I just wish it wasn't so expensive, at almost $70 bucks!  If I had a milling machine and some aluminum lying around, I'd make my own. 

I sincerely thank you all for the encouragement and kind words. 

Ed

Link to comment
Share on other sites

7 hours ago, popeye the sailor said:

hello Ed........just reviewed the super job your doing here :)   I've heard of the concept your building her in........basically,  it highlights the added detail and allows the viewer to see a larger scope.  I have a set of 1:350 PE for the hood.......I've been having fun matching up the different parts your working with ;)   truly great job.......gonna be a monster when it begins to come together!  taking a seat :) 

Thank you!  I have no idea what I'm going to do with it when I'm done! Since I just finished the Mikasa, I'm very familiar with the effort it took to make a display for it, and the cost, and the Mikasa isn't nearly as huge as this kit is.  So I really don't know what's going to happen! Right off the bat, who's going to help me lift the glass to place it over the kit?!! I wish I could sell these guys, but not many people are interested in a "built" model.

Working with 1:350 is a whole other thing.  Try 1/700 with PE!  I have a few. Total madness.

Ed

Link to comment
Share on other sites

1 hour ago, Salty Dog said:

As it is, I NEVER use the paper instructions they give, you.  I either download the PDF or convert them to PDF and use my computer screen in front of my work area as a magnifying glass.

If there ever was a QFT, it's this one. With Pontos sets, it is absolutely essential to have those plan PDF photos in front of you and magnified to see what the heck is going on. As for any kind of 'order of assembly', you just have to figure it out on your own. Can't believe how many times I've folded a piece in the wrong direction and broke it.

 

As for the expensive rolling tool, try this one. It does the job and is half the price. By the way, this is a great online hobby shop to do business with. Super customer service. https://www.scalehobbyist.com/catagories/Tools/SMS00000014/product.php?gclid=Cj0KCQjwxYLoBRCxARIsAEf16-u1-zyc7z1wkju3Tud3wSOYsVARTJsbluvBKoaQB6slCqk0I-_HLnMaAvJdEALw_wcB

Link to comment
Share on other sites

2 minutes ago, CDW said:

If there ever was a QFT, it's this one. With Pontos sets, it is absolutely essential to have those plan PDF photos in front of you and magnified to see what the heck is going on. As for any kind of 'order of assembly', you just have to figure it out on your own. Can't believe how many times I've folded a piece in the wrong direction and broke it.

 

As for the expensive rolling tool, try this one. It does the job and is half the price. By the way, this is a great online hobby shop to do business with. Super customer service. https://www.scalehobbyist.com/catagories/Tools/SMS00000014/product.php?gclid=Cj0KCQjwxYLoBRCxARIsAEf16-u1-zyc7z1wkju3Tud3wSOYsVARTJsbluvBKoaQB6slCqk0I-_HLnMaAvJdEALw_wcB

Funny you post that other tool!  I was just in the garage, trying to make my own.  I have some boxwood which is pretty hard. I got it nice and flat and then proceeded to TRY to make some groves using this:

image.png.69b3dba79477bef056efb29757fe0fd5.pngGot nothing but junk! No matter what bit I used, that stand is wiggly as hell. No precision at all.

If I had a router and some small round bits, that might do it, but I think the one you suggest is the right way to go. It doesn't have to be some fancy "deluxe" version.  With the amount of pressure that it takes to bend and roll PE (next to nothing), this will do.  Ordering it. Thanks!

 

 

Link to comment
Share on other sites

You probably know this already, but for the benefit of those reading who have not done a lot of photo etch work, first anneal the brass to be rolled by heating it over a lit candle, then allow it to cool slowly by air. Now it will be soft and malleable easily holding any shape you put to it and not 'springing' back. If after achieving your desired shape you wish to harden the piece, heat it again over a candle then quickly immerse it in water. It will again have it's hardness. Annealing makes rolling photo etch so much easier. Night and day difference. Try it on some scrap first to get the feel for it. it's really easy to do.

Link to comment
Share on other sites

I love to solve problems.  Love to play Macgyver. My daughter gets a kick out of it when I'm working on something and I figure out tricks to get us out of a mess or to fix something. This PE rolling thing has been bugging me since last night.  Even the cheaper model $35, seems like so much for such limited use. So I went to the hardware store and got an idea. You can always cut some brass or copper tubing in half the long way, to form a channel, and then use a brass tube or dowel the size of the inner diameter of the channel to bend the PE. Even just to get the start of the shape is good enough for me. I probably have the materials in my stash!

Link to comment
Share on other sites

1 hour ago, CDW said:

You probably know this already, but for the benefit of those reading who have not done a lot of photo etch work, first anneal the brass to be rolled by heating it over a lit candle, then allow it to cool slowly by air. Now it will be soft and malleable easily holding any shape you put to it and not 'springing' back. If after achieving your desired shape you wish to harden the piece, heat it again over a candle then quickly immerse it in water. It will again have it's hardness. Annealing makes rolling photo etch so much easier. Night and day difference. Try it on some scrap first to get the feel for it. it's really easy to do.

I did lots of annealing in my days, but only with glass. I used to "make" laser tubes, that required some minor glass blowing and joining, and then annealing. Ahhh memories!

Link to comment
Share on other sites

Update. I'm almost done with this assembly:

IMG_0101.thumb.JPG.a5f19d22fe25ba8e9206fe3cbdac9010.JPGIMG_0102.thumb.JPG.8e993556936b46350bebda5cea175c3c.JPGIMG_0100.thumb.JPG.174f182e8acca3d36b636181304c42e2.JPG

 

Tomorrow are the funnels:

IMG_0103.thumb.JPG.f116ad9e6ed1b41dcbcd04038a732d33.JPG

I played around with wrapping a funnel in the PE, and even though I wrapped it tightly around, the PE bounced back without even the slightest curve! You can usually just tack down one side of the PE and then work your way as a cylinder.  Not this time.  The stuff is thick and rigid. Going to have to figure out how to roll it, or get some killer glue to hold it. Doesn't look fun.

Link to comment
Share on other sites

Ed and others, check out UMM-USA. Their prices are good and the quality of tools very good. Here is the same rolling tool: http://umm-usa.com/onlinestore/index.php?cPath=21_225

 

I like your approach for this build. Shows off you work with PE.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

:imNotWorthy:

Admiration for all the PE work also, my attempt was once with 1/700 scale and will never do it again. Myself and PE don't mix. 

 

1151298475_LHA6USSAmerica1.thumb.jpg.085d83e81cfdf844291534db02080482.jpg

3731815_LHA6USSAmerica1a.thumb.jpg.6fb513ca351e0643dfcc17532ea6944b.jpg

Current build project: 

CSS Alabama 1/96

https://modelshipworld.com/topic/20148-css-alabama-by-jonathan11-revell-196-scale-kit-bash-90-historical-accuracy/

Finished build projects 2018:

H.L Hunley 1/24

CSS Arkansas 1/96

Link to comment
Share on other sites

I've got the "rolling" tool, and it makes a world of difference. Not cheap, but worth the cost.

 

Tamiya has two solutions to dilute you should use the lacquer thinner even for their acrylic, as Tamiya's acrylic paints aren't real acrylics. I do have to add that alcohol evaporates quicker so it's up to you. I like to try different paints and thinners and mix up brands.

 

Love the JPS look, although, I do miss that high gloss of the black. The silk sheen does have a nice touch to it too

 

If you are looking for a more stable, and versatile drill press for dremel like tools, this one could be of interest to you

Website: http://vanda-layindustries.com/

 

Cheers

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

6 hours ago, Jonathan11 said:

:imNotWorthy:

Admiration for all the PE work also, my attempt was once with 1/700 scale and will never do it again. Myself and PE don't mix. 

 

1151298475_LHA6USSAmerica1.thumb.jpg.085d83e81cfdf844291534db02080482.jpg

3731815_LHA6USSAmerica1a.thumb.jpg.6fb513ca351e0643dfcc17532ea6944b.jpg

This is really beautiful!  I have thought about what other colors I would use instead of black for the unpainted brass look, and dark blue and dark red are my next ideas.  I love how that looks and you did a fantastic job!

Link to comment
Share on other sites

3 hours ago, mtdoramike said:

The model is absolutely stunning and the cross stitching is awesome as well. There's nothing like keeping your hands busy especially if you can turn out stuff like this.

Thanks Mike (I'm assuming that's your name).

I appreciate every encouraging comment.  I honestly get fueled by it.  When I was at the "other" site and got no reactions, I actually got bored and stopped working on the Mikasa for a long time.  It would have been finished long before if I had the encouragement.

Thank you again.

Ed

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...