Jump to content

HMS Triton Cross Section by Rusty - FINISHED - 1:48


Recommended Posts

Rusty

Just looked at your planking and page 99 of Mondfeld's Historic Ship Models and your planking looks like the 2nd one down which is the Continental variation of the three plank shift. Nice Job. Love your use of colored woods. I'm thinking Bloodwood for several spots.

Also Love Mondfeld's book. Well need to go thickness plan some wood for my build.

Looking forward to seeing what great things that you do next.

 

Later 42rocker

Current Build -- Finishing a 1:1 House that I've been building for a while

Current Build -- Triton Cross Section

Link to comment
Share on other sites

  • 2 weeks later...

Hi all,

 

Well I’ve been on a bit of a forced break. Our daughter went on a second honeymoon

and we had the pleasure of watching three of our sweet but high maintenance grandkids.

So needless to say I was lucky if I got to look longingly into the workshop yet not be able

to step in and partake! :angry:

 

It took one day to figure out where I left off and what to do next. Here are some things I

had done prior to their arrival and since the departure.

 

Seeing that I had planked the deck to the point that I needed to install the main topsail

sheet bitts before I could continue I figured it was time to make them.

 

I started at the tops, figured the depth I needed to cut them to and the cut away the extra

with the table saw.

 

post-43-0-03595800-1370479612_thumb.jpg

post-43-0-15692200-1370479613_thumb.jpg

post-43-0-14694200-1370479614_thumb.jpg

 

After they were cut square I used a file to sand them down to a round shape.

 

post-43-0-19221600-1370479615_thumb.jpg

 

After that I used the table saw to cut the cross piece and deck beam notches. I then

drilled the holes for the sheaves and shaped them with a file and xacto.

 

Here they are set temporarily in place.

 

post-43-0-90321600-1370479646_thumb.jpg

 

 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Rusty:

They look very good. My only advice here is to make sure they are set perpendicular to the baseline when you finally install them. Right now, they look like they are leaning outboard a bit.

 

Russ

Link to comment
Share on other sites

Thanks Russ.

 

Yes they are a bit off plus the angle of the camera makes it worse.

Once I glue them in place hopefully they will sit straight.

 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Next I focused on the Gallows. The plans called for them to look like this.

 

post-43-0-54525800-1370481578_thumb.jpg

 

I saw some other builds where people got a little creative with the gallows

and I liked the look and figured I’d give it a try.

 

First I cut the gallows as per the plans.

 

post-43-0-85034500-1370481581_thumb.jpg

 

After cutting the gallows from the plans I decided on a style I like, traced it on the wood.

 

post-43-0-04427000-1370481585_thumb.jpg

 

I then using a ¼” dremel sanding drum, files and sand paper I created the shape.

 

post-43-0-47042200-1370481586_thumb.jpg

 

Here it is semi sanded to the desired shape.

 

post-43-0-83241600-1370481589_thumb.jpg

 

I don’t know if it is historically accurate but I’ve heard the captain can us his

prerogative while building his ship. :) 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Rusty,

nice work with the bitts and gallows. Your technique for the top of the bitts is a good one, I'm banging my head against the wall at present whilst repeating "Why didn't I think of that!". The tops of my bitts were made as separate pieces, creating some extra, fiddly work to assemble it all. Keep up the good work.

Btw, your use of the word "sweet" to describe the grandkids, are they all girls?

Regards,

Grant.

Link to comment
Share on other sites

Nice work Rusty, it is good to make your own mark on the build and of course you are not only the builder of, but also the captain of your ship.

Regards,

Martin. 

" LIFE IS NOT A DVD YOU CANNOT REPLAY IT, ENJOY IT WHILE YOU CAN"

Link to comment
Share on other sites

Link to comment
Share on other sites

Rusty lovely work

 

i am following more and more scratch builds, as i countdown to my next project which will be a 1/24 section build, My Victory comes first though

 

all the best

Link to comment
Share on other sites

Very nicely done Rusty, as always. Love the personalised touch with the gallows.

Link to comment
Share on other sites

Hi.

Very nice work it's turning into something to be proud off. :)

Love the photos.

And I like the way you have added own ideas into the build. Makes it personal.

 

Regards Antony.

Best advice ever given to me."If you don't know ..Just ask.

Completed Mayflower

Completed Fun build Tail boat Tailboat

Completed Build Chinese Junk Chinese Pirate Junk

Completed scratch built Korean Turtle ship 1/32 Turtle ship

Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia

On hold. Bounty Occre 1/45

Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section

Completed H.M.S. Victory X section by Coral. HMS Victory cross section

Completed The Black Pearl fun build Black Queen

Completed A large scale Victory cross section 1/36 Victory Cross Section

Link to comment
Share on other sites

Hi all,

 

Thank you for all the kind words. It is very much appreciated.

 

Well after making the bits and gallows I installed just the bits and cross piece.

I left the gallows off for now as I still had to add a few pieces of planking and

treenail. I didn’t want to damage the gallows with my ham fist hands.

 

post-43-0-74773900-1370781782_thumb.jpg

 

post-43-0-89367800-1370781789_thumb.jpg

 

For the deck treenails I used boxwood. They stand out a little more than some

will like but I kind of liked the contrast.

 

post-43-0-39120600-1370781812_thumb.jpg

 

Next I will start framing in the gun ports and continue planking the exterior of

the hull. That is if the summer activates will allow me sometime to do so. :o 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

"""Ham fist hands""" I like that phrase.

Your planning and your work is great as per normally. I keep looking at the great different color woods that you used, well done Sir, well done.

 

Later 42rocker

Current Build -- Finishing a 1:1 House that I've been building for a while

Current Build -- Triton Cross Section

Link to comment
Share on other sites

looks very nice, well done

Link to comment
Share on other sites

  • 2 weeks later...

Hi all and thanks for the kinds words.

 

I’ve been trying to find a bit of time here and there between summer stuff,

grandkids and ugh….work. :angry:

 

I started to work on the gun ports. I wanted to keep working with wood instead

of paint but I also wanted the bulwarks and ports to be red. So with that in mind

I framed in the gun ports with red heart and will plank the inboard with red heart

and outboard with boxwood.

 

Here you can see the start of the framing.  

 

post-43-0-66195100-1371588825_thumb.jpg

 

post-43-0-05200000-1371588832_thumb.jpg

 

post-43-0-74230800-1371588838_thumb.jpg

 

post-43-0-84386400-1371588843_thumb.jpg

 

post-43-0-18744900-1371589373_thumb.jpg

 

Thanks for following along!

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Rusty:

Nice work on the gunports and the planking. It really looks great.

 

Russ

Link to comment
Share on other sites

Beautiful work, Rusty.  Love the wood choices.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Great work Rusty. Really like the "painting with wood" concept.

Link to comment
Share on other sites

Link to comment
Share on other sites

Thank you, Russ, 42Rocker, Mark, Grant, Joss and Bob. I glad you like it.

 

Before I could continue planking I had to make the trim board.

 

I took an old scraper and filed the desired profile into it (the left one).

 

post-43-0-76249600-1371674869_thumb.jpg

 

Cut the trim piece from some swiss pear and then used the scrapper to shape it.

 

post-43-0-21029300-1371674876_thumb.jpg

 

And then added it to the hull.

 

post-43-0-21791600-1371674864_thumb.jpg

 

Now I can finish the planking and then make some more treenails.

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...