Diver Posted February 2, 2023 Share #451 Posted February 2, 2023 Beautifull work. Can I ask where the board cutter was purchased. Thanks Dave_E and FrankWouts 2 Link to comment Share on other sites More sharing options...
Rustyj Posted February 2, 2023 Share #452 Posted February 2, 2023 Wonderful job on the planking Glenn. Not that I'd expect anything else! Enjoy your trip, be safe and I look forward to seeing the new photographs. FrankWouts and Dave_E 2 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
Hsae Posted February 2, 2023 Share #453 Posted February 2, 2023 17 minutes ago, Diver said: Beautifull work. Can I ask where the board cutter was purchased. Thanks Another option: https://ultimation.ca/products/slicer Dave_E and FrankWouts 2 Link to comment Share on other sites More sharing options...
glbarlow Posted February 2, 2023 Author Share #454 Posted February 2, 2023 3 hours ago, James G said: Looks so nice, Glenn. Thank you! 3 hours ago, Hsae said: where did you get your “mini-me” from? Did they actually scan you, or how does it work? I got them from Shapeways.com under the category ‘humans’ at 1:48 scale. I selected one and hand painted them to kinda look like me. I borrowed the idea from Chuck as a fun way to have an appreciation for the scale of the ship. Hsae, FrankWouts and Dave_E 3 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
glbarlow Posted February 2, 2023 Author Share #455 Posted February 2, 2023 2 hours ago, Diver said: board cutter was purchased. From the manufacturer, www.rptoolz.com. They are clever enough to print their website right on the cutter. It’s pricey but worth it. FrankWouts and Dave_E 2 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
glbarlow Posted February 2, 2023 Author Share #456 Posted February 2, 2023 2 hours ago, Rustyj said: Wonderful job on the planking Thanks Rusty, though I am looking forward to being done with planking for a while. Dave_E and FrankWouts 2 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
Edwardkenway Posted February 2, 2023 Share #457 Posted February 2, 2023 I wouldn't worry about Winnie going anywhere while you're in Patagonia. She'll wait patiently 🙂 Enjoy the trip! glbarlow, FrankWouts, Dave_E and 1 other 4 Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED Link to comment Share on other sites More sharing options...
Toolmaker Posted February 4, 2023 Share #458 Posted February 4, 2023 Hello Glen, I’m fairly new to wooden ship building and this is my first comment on your build, so hence the formality. Your log is both inspirational, educational and a pleasure to read. Yes, there are multiple wonderful builds of this model, but the detail you show, whilst not being over repetitive is a perfect fit for me. I hope you don’t mind but I have a question on the use of the monofilament fishing line, used to represent bolts. So far, I can only see the “size” given as the breaking strain. I was hoping you could measure the diameter used and quote that either in MM or English. My concern is that different manufacturers will offer varying diameters for a given breaking strain so a known size would be useful. Of course if I knew the size of the ship builders bolts/nails etc, I could scale them myself. I intend to commence with my own build of HMS Winchelsea later this year and your build will be my favoured mentoring resource. Thank you Paul Dave_E, glbarlow, FrankWouts and 1 other 4 Link to comment Share on other sites More sharing options...
FrankWouts Posted February 4, 2023 Share #459 Posted February 4, 2023 You're making great progress Glenn, all looks fantastic and I'm following with great interest! I hope to catch up someday, I don't seem to have as much free time as you do 😉 Frank. glbarlow and Dave_E 2 Current builds on MSW: HMS Winchelsea 1:48: Prior builds on MSW: None Link to comment Share on other sites More sharing options...
glbarlow Posted February 4, 2023 Author Share #460 Posted February 4, 2023 3 hours ago, Toolmaker said: hoping you could measure the diameter Welcome to MSW and thank you for your comment, I’m glad my log is helpful. I googled this chart showing thickness of monofilament line in mm. https://www.beadkraft.com/reference-monofilament FrankWouts and Toolmaker 1 1 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
glbarlow Posted February 4, 2023 Author Share #461 Posted February 4, 2023 2 hours ago, FrankWouts said: have as much free time Thanks Frank. I’m retired, I have lots of time. I enjoy planking but it does become a chore after a few months of it. I’ll be glad to finish the deck and move on. Your Winnie is looking amazing. Dave_E, FrankWouts and JpR62 3 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
glbarlow Posted February 16, 2023 Author Share #462 Posted February 16, 2023 When I'm not building ships I'm off about the world doing this, near Chalten, Argentina. James G, Dave_E, Blue Ensign and 12 others 8 7 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
BobG Posted February 16, 2023 Share #463 Posted February 16, 2023 My wife and I and our son, who was studying in Buenos Aires at the time, spent a couple of weeks in Patagonia as part of a 6 week trip in Argentina in 2010 and Patagonia was spectacular. We particularly loved hiking in Fitz Roy Mountain Range in El Chaltén and in the Torres del Paine National Park. The hike up to the three Towers of Paine was amazing. Enjoy Glenn! Dave_E, FrankWouts and glbarlow 3 Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Nunnehi (Don) Posted February 17, 2023 Share #464 Posted February 17, 2023 That’s gorgeous! Dave_E, FrankWouts and glbarlow 3 Link to comment Share on other sites More sharing options...
glbarlow Posted February 26, 2023 Author Share #465 Posted February 26, 2023 Main Deck Complete I’ve returned from my two week journey to Argentina and Chile pursuing my other hobby of photography, it was incredible. Before I left I completed the deck but didn’t have time for a post, so I’m now catching up. With the challenging center belt completed the belts either side are straightforward enough. I’ve had some issues with my Byrnes saw and ended up sending it back to Byrnes Model Machines for some repairs and a tune up. I’ve had it since 2008 so it was probably time. The Thickness Sander was a joy to use in providing consistent thickness planks for the deck. The deck became a construction zone as I followed my marked out butt shift plan on the lined deck. The lining out showed me where the tapered planks began to achieved the desired subtle but curved planking. I used the same double-sided tape, metal ruler, and #11 blade method I described earlier in this log for the hull planking. My goal was to keep the tapered planks to near the same width for each plank for a consistent look. The lining off of the deck was the guiding force in doing this, though I doubled down with tick strips to confirm and mark the planks. The actual builders probably didn’t use little strips of woods to ensure tight seams between planks, but it works well for the model as I opted to use white PVA for the deck and drying time was necessary. I spent a lot of time sorting planks to keep the colors as even as possible. As we know there is generally some color variation in AYC. Even with that sorting the 5/16th billet I had was darker than the ¼ planks, but it’s consistent so it’s ok. The master gunner stopped by for a trial fit of the waist battery, he was satisfied with the look. With the planking complete, I did some aggressive sanding with 220, 320, and 400 grit sandpaper in turn. That resulted in a nick here and there on the coamings, easily corrected with Tamiya tape and the Admiralty Ironwork Black paint, 10/0, 3/0, and 20//0 paint brushes as needed. The tape job was excessive, there were just small paint dings to touch up. I applied three coats of WOP with light sanding after the second (the first is absorbed deeply into the sanded wood), buffed it up and the deck is done. You can see here the difference in the 5/16 wood either side of the center belt. This will hardly be noticeable at all once the deck furnishings and especially after forecastle and quarterdeck are later installed. It’s really not all that noticeable now. With that the deck, and Chapter 4, are complete. Here are iPhone photos sharing the state of my Winchelsea. I really ought to get the good gear out at some point for photos. Thank you for stopping by. Your likes and comments are always deeply appreciated. Chapter 5 will have to wait until after I’ve selected, processed, edited, and published from the over 1,000 images taken during my Patagonia trip. Nunnehi (Don), Chuck, Hsae and 25 others 23 5 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
Dave_E Posted February 27, 2023 Share #466 Posted February 27, 2023 Ever thought about adding professional model maker to your repertoire? Unbelievable perfection. 👏👍😀 FrankWouts and glbarlow 2 Dave Current builds: Rattlesnake Completed builds: Lady Nelson On the shelf: NRG Half Hull Project, Various metal, plastic and paper models Link to comment Share on other sites More sharing options...
BobG Posted February 27, 2023 Share #467 Posted February 27, 2023 Gorgeous, Glenn! FrankWouts, glbarlow and Dave_E 3 Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Toolmaker Posted February 27, 2023 Share #468 Posted February 27, 2023 Both inspirational and aspirational, which translates to, that’s beautiful work which I hope to match one day. FrankWouts, glbarlow and Dave_E 3 Link to comment Share on other sites More sharing options...
DelF Posted February 27, 2023 Share #469 Posted February 27, 2023 Superb work Glenn, as always. Derek glbarlow, Dave_E and FrankWouts 3 Cheers, Derek Current build: Duchess of Kingston On hold: HMS Winchelsea Previous builds: HMS Speedy, English Pinnace, Royal Yacht Caroline (gallery), Victory Cross-section (gallery), US Clipper Albatros, Red Dragon (years ago!) On the stocks: 18th Century Longboat Link to comment Share on other sites More sharing options...
Gus M Posted February 27, 2023 Share #470 Posted February 27, 2023 Impressive work, congrats FrankWouts, glbarlow and Dave_E 3 Greetings Gus ------------------------------------------------------------------- Current build log: San Francisco Cross Section Link to comment Share on other sites More sharing options...
westwood Posted February 27, 2023 Share #471 Posted February 27, 2023 Superb deck Glenn, congratulations and I look forward to the next chapter in your work Dave_E, glbarlow and FrankWouts 3 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48 Link to comment Share on other sites More sharing options...
Chuck Posted February 27, 2023 Share #472 Posted February 27, 2023 Looking really nice. Well done Dave_E, FrankWouts and glbarlow 3 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
FrankWouts Posted February 27, 2023 Share #473 Posted February 27, 2023 Beaufitul work Glenn! Congrats and please keep your updates coming! Frank. glbarlow, Stuntflyer and Dave_E 3 Current builds on MSW: HMS Winchelsea 1:48: Prior builds on MSW: None Link to comment Share on other sites More sharing options...
scrubbyj427 Posted February 27, 2023 Share #474 Posted February 27, 2023 She looks stunning Glenn, very nicely done. FrankWouts, glbarlow and Dave_E 3 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
glbarlow Posted February 27, 2023 Author Share #475 Posted February 27, 2023 Thank you all for the kind comments and likes. I appreciate your time stopping by. JpR62, Jack12477, Dave_E and 3 others 6 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
VTHokiEE Posted February 27, 2023 Share #476 Posted February 27, 2023 Beautiful work, hats off to you! Dave_E, FrankWouts and glbarlow 3 Current Build: HM Sloop Echo 1781 (First Scratch Build) Previous Builds: HM Cutter Alert, Sharpie Schooner, Chesapeake Bay Flattie, Half-Hull (NRG) Link to comment Share on other sites More sharing options...
Rustyj Posted February 27, 2023 Share #477 Posted February 27, 2023 Everyone has used all the good words to describe your decking. I'll just say well done! Ryland Craze, James G, Dave_E and 2 others 5 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
Nunnehi (Don) Posted February 28, 2023 Share #478 Posted February 28, 2023 That looks great, Glen! Don Dave_E, glbarlow and FrankWouts 3 Link to comment Share on other sites More sharing options...
Edwardkenway Posted February 28, 2023 Share #479 Posted February 28, 2023 Very, very nice, a superbly planked deck Glenn. Dave_E, glbarlow and FrankWouts 3 Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED Link to comment Share on other sites More sharing options...
glbarlow Posted February 28, 2023 Author Share #480 Posted February 28, 2023 Thank you for your comments. Yesterday was spent drilling holes for the many ring bolts, I have to say it hurt a little bit to do so 😂 James G, Matt D, FrankWouts and 3 others 6 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
Recommended Posts