Jump to content

French Ironclad Solferino 1861 by GrandpaPhil - FINISHED - Orel - 1/200 - CARD


Recommended Posts

 Phil, the jib sail looks great! 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Link to comment
Share on other sites

25 minutes ago, Glen McGuire said:

Just stumbled onto this log

 Well, if you weren't having Kraken morning tea ya wouldn't be stumbling about. :D

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Link to comment
Share on other sites

Thank you very much for the comments and for all the likes!

 

Both jib sails are on:9A927CEB-4153-4469-949D-C85AAE400A3B.thumb.jpeg.382ecbeaa0f1359d3e11b59631ac0cba.jpeg3ECF9428-6750-4EC3-B1DC-0269F1E08F68.thumb.jpeg.92c8abdec53b3034d35e74949e87804b.jpeg

I am trying out the paper sails that came in the kit.

 

I was going to make silk span sails, but I took the inspiration to use these, which are very nicely made anyway, from the paper sails on the Great Republic by @rwiederrich.  
 

They looked phenomenal on his model!  

 

The Great Republic is one of the best models that I have ever seen!

 

Edited by GrandpaPhil

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)

Link to comment
Share on other sites

8F8D7AE9-21AE-433E-B7AF-5EF668C1A742.thumb.jpeg.1b758685e8eee37fd252396529accdd3.jpeg
I went ahead and assembly lined the blocks on the rest of the yards and gaffs.

 

That includes pre-installing the vangs on the gaffs.

 

I should have been treating this model like any other model, all along, and assembly lining where I could.

 

So, next, I’m going to pre-install the rest of the blocks for the yard-arm braces in the forestays.

 

Then, I’ll cut out the rest of the sails, attach blocks where needed, and glue them to their yards.

 

Due to scale, sewing them to the yards won’t look right and I have already tested glueing them with the first gaff sail.

 

 

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)

Link to comment
Share on other sites

Now how can I get any work done with one eye on the computer watching you Go . That is some nice work!!:cheers:

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Link to comment
Share on other sites

Thank you very much!

 

The foremast is fully rigged now!

B1BBF534-7BC4-41B2-A7F5-E319D692529D.thumb.jpeg.0060d17f20097efc53b4b1efa164a29e.jpeg2A02113B-CBAB-46D5-837A-38A998FFB3AD.thumb.jpeg.b0cccf709d9ada821435f74c59feeb00.jpeg

For the scale, this model has a lot of rigging.

 

The last time I rigged a barque (Mamoli 1:100 Endeavour), it took me several months, without sails.

 

This one has about half of the rigging that a fully rigged model would have, but at this scale, the deck gets crowded QUICK.

 

So, I’ve been belaying to anything I can find.

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)

Link to comment
Share on other sites

Quick lesson learned from previous builds, always install and rig the gaff sail, or gaff, first, before proceeding with square sails, or yards, on that mast.

 

That way you’re not trying to lower a gaff, with or without a sail, through a cage made from the braces.

 

Also, always work one mast at a time.

Edited by GrandpaPhil

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)

Link to comment
Share on other sites

The main mast is fully rigged and the mizzen gaff has been glued in place!

8B70C87E-5C86-4626-99C8-2AFC416C1D1A.thumb.jpeg.9faa6619e584994b3bb069162eacbce1.jpeg922E5EFC-9D3E-4346-BCBA-0F8B889E4BD1.thumb.jpeg.0c0d17f24174a96995397270a4c6ceca.jpeg
All I have left is rigging the gaff sail, installing the mizzen stay sail, and then one pennant, which will be the last thing I do to this model.

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)

Link to comment
Share on other sites

And, 15 months and 400 hours later, done!

7B7F74EF-1B1F-4C8E-8EF2-876D95F4DC37.thumb.jpeg.e483c9d49fcc38b162013db31477bf38.jpeg2551310E-230B-4AAD-AF8A-DDD898F0FCEE.thumb.jpeg.f82594cf8f5ca6fc04bd56d6521ad600.jpeg2EE99D22-3F3F-4EAF-8CB6-5255BE50AC56.thumb.jpeg.04e3887ad47639f1f12378c32c83ae75.jpegB30EDA19-4581-4C5F-A551-38BC888C2069.thumb.jpeg.e61bca4ccf4c93fd1af09d205cf0fc64.jpeg6696A635-28FD-404E-87CE-6FAF0FAAA822.thumb.jpeg.755e8383888d53b40ab3da7fe7714bbd.jpeg0E16BC0E-0847-49F7-8435-F82BB2BC91DE.thumb.jpeg.8573f62b3b8e0c41c11fef8f64ef0e9a.jpeg9B118016-E40E-4C78-B645-D8DAA5DC48DA.thumb.jpeg.5be42826d971739a98c4828e0753185a.jpeg47BEAF1D-1DC6-4912-A1D7-FC01871DACE6.thumb.jpeg.dd944c0f6aff8d7edb731c388ee65408.jpeg1043C9FD-2D62-4B2C-9338-2E3D87234F0F.thumb.jpeg.0164d0daf5b15fcce5041fbbfb4c16d8.jpeg98313640-EB76-46A2-A0F7-F2486FDD32C1.thumb.jpeg.dc857add315fc6afebbe0ebc63e99871.jpeg10DF9470-E02B-44CE-8317-D4C1F4FDABD5.thumb.jpeg.21d81435fe072e5a995c6a2ddbcfacf7.jpeg6BC15EC4-609B-4F8D-8BE0-42EED04F2B97.thumb.jpeg.b1cf81e46ddd06f1161159496697260b.jpeg

It’s not perfect, but it’ll do.

 

I never intended to finish the 1/200 version.

 

I intended this as a learning tool to learn about ironclad construction and design, in which I succeeded marvelously.

 

The Admiral wanted this model, so I finished it for her.


This is the third card ship that I have built, but only the first card ship kit that I have built.

 

Building from a card kit had its own unique difficulties, like matching paint colors, and worrying about losing detail if you had to repaint something.

 

On the whole I enjoyed this build quite a lot.

 

Thank you very much to everyone who followed along, commented and hit the “like” button!

 

Thank you very much @ccoyle for starting me down this road with your HMV builds!

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)

Link to comment
Share on other sites

 Phil, you are a machine! I can not believe how quickly you hung the sails and finished the rigging. Congratulations on completing this marvelous ship. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Link to comment
Share on other sites

Nice work, was really  fun to watch you assemble  this ship . On to the next one !!:cheers:

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Link to comment
Share on other sites

20 minutes ago, GrandpaPhil said:

Thank you very much @ccoyle for starting me down this road with your HMV builds!

 

You're welcome, and congratulations!

Chris Coyle
Greer, South Carolina

When you have to shoot, shoot. Don't talk.
- Tuco

Current builds: Brigantine Phoenix, Bf 109E-7/trop

Link to comment
Share on other sites

Amazing build! Well done Phil. 

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Link to comment
Share on other sites

What great looking ship, superbly done Phil! 

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

Phil, congratulations on finishing this wonderful ship. I like those sails A LOT!

Regards……..Paul 

 

Completed Builds   Glad Tidings Model Shipways. -   Nordland Boat. Billings Boats . -  HM Cutter Cheerful-1806  Syren Model Ship Company. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...