Knocklouder Posted May 12, 2023 Author #31 Posted May 12, 2023 (edited) On 5/10/2023 at 2:50 PM, Bryan Woods said: Your build looks amazing! It will be a while before I start mine but I will definitely heed the advice on the cling wrapping the Strong back. Can you tell me about how much CA you used coating the inside of the hull? @Bryan Woods, I can't really say how much I used. I just took the top off the bottle and used an old artist brush. Then just threw it away. So I finished the ribs, installed the stringers. I made some amber shellac, and coated the inside, got carried away and did the hull one coat. It looks marvelous I think. The first Mate loves it. Starting to do the decking but the old eyes are getting tired lol. This is were she be now. This is a fun build the wood and the instructions are top notch. Can't wait till tomorrow to finish the decks, but got some outside work to do, the first Mate is itching to get at her garden, so I will have to rotter till it for her. Plus we got to go on a road trip at the beginning of June so she wants her oil changed in her car before we go. Shees don't they know I got modeling to do lol. Thanks for all the likes and help. I could not have done this one for sure with out the help of the four logs on this boat here Thank you all. Edited May 12, 2023 by Knocklouder Archi, VitusBering, Snug Harbor Johnny and 7 others 8 2 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
Keith Black Posted May 12, 2023 #32 Posted May 12, 2023 Sweet. mtaylor and Glen McGuire 2 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
mtaylor Posted May 13, 2023 #33 Posted May 13, 2023 Wonderful work, Bob. Looking great. Glen McGuire and Keith Black 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
HardeeHarHar Posted May 14, 2023 #34 Posted May 14, 2023 Nicccccceeeee work there Roberto! mtaylor, Keith Black and Glen McGuire 3 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model
Knocklouder Posted May 14, 2023 Author #35 Posted May 14, 2023 (edited) Thank you very much for the likes and comments, appreciated 😊. So we move on to the decks, also made the yardarm, mast, and drilled holes for the ropes later. The decks turn out well, the wood is excellent. I have to Thank Scott Miller soon, I will send him a picture when done.lolNow it was time for the cutwater, I traced the bow on a peice of paper, a left pofile and a right, or port side , starboard. Then I stacked the 4x4 and traced it on. Everything looked straight, but by the time I fitted it, there was a bit of a slant. But it will do lol. The port side looks more rounded than the starboard side, but you would have to look close for that. Captain Marvin has one complaint though lol. The first Mate would like a floor in her boat, so today I should glue in the mast. Install the floor and put the cap rails on, we will see lol. This will be the display side . I am pretty happy with the boat so far. I am even thinking of my next build lol, and I have not finished this one. Lots of time though lol. Edited May 14, 2023 by Knocklouder Yep typos 😒 Scottish Guy, LyleK1, Keith Black and 7 others 7 3 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
VitusBering Posted May 14, 2023 #36 Posted May 14, 2023 Awesome work and I totally agree the deck wood (and the rest too) looks fantastic. Glen McGuire, mtaylor, Knocklouder and 1 other 3 1 Quote Current build: Cutty Sark by VitusBering - Revell - 1:96 - Redux -- Darryl
Louie da fly Posted May 17, 2023 #37 Posted May 17, 2023 Looking very good, mate. Glen McGuire, Keith Black and mtaylor 3 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
Knocklouder Posted May 17, 2023 Author #38 Posted May 17, 2023 Well I am getting there, installed the floor, false keel. The false keel has quite the bend to it and I was looking for a spare because I was sure it was going to break, but it didn't lol. After that it was the cap rail , they almost fit with out any bending , just a little bit of heat and they fit perfectly. Then I made the oars, rudders, davits, and stern peice. So I have the benches to make and prep the sails, run four rigging lines, no wait six lol. I will be done rigging in a day lol. Yep getting close on this one. It has been a blast. The bending of the wood, the making of the amber shellac, it was all so much fun to do. I am sure The First Mate will love this as she does say it looks beautiful every time she comes to visit me in the ship yard, lol. So just a bunch of things to put together and I call it done , maybe a week or less. Thanks so much everyone it has been fun hanging out with you all. Balclutha75, DanielD, Snug Harbor Johnny and 8 others 4 7 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
Keith Black Posted May 17, 2023 #39 Posted May 17, 2023 Very very nice, Bob. Wonderful job. Glen McGuire, BLACK VIKING and mtaylor 3 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
mtaylor Posted May 17, 2023 #40 Posted May 17, 2023 And the finish line is near, Bob. You've come a long way on learning and it shows. Very well done. Glen McGuire, Keith Black and BLACK VIKING 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Louie da fly Posted May 17, 2023 #41 Posted May 17, 2023 Getting very close, Bob. A vessel to be proud of. Is it too early to ask what you plan to make next? Steven Keith Black, BLACK VIKING, Glen McGuire and 1 other 4 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
Glen McGuire Posted May 18, 2023 #42 Posted May 18, 2023 Such a beautiful boat. It looked like such a simple build from the picture in your first post. But following each of your steps along the way has shown me that there is a lot of hidden complexity in the build requiring a lot of skill. Well done (with the finish line near), my friend! BLACK VIKING, mtaylor and Keith Black 3 Quote Current builds: BlueJacket Constitution Repair & Build Flying Dutchman/Black Pearl Pirates of the Caribbean SIB Gallery: Mamoli CSS Alabama; Amati Hannah-SIB; Charles W Morgan-SIB; Aurora-SIB; Independence-SIB; Zheng He Treasure Fleet-SIB; Adventure Galley-SIB; Oseberg/Kraken-SIB; Roman Quinquereme/Archimedes' Claw-SIB; Wa'a Kualua-SIB; Ghost Ship Jenny-SIB; Banshee II-SIB, Completed build logs: Alabama; Hannah; Morgan; Aurora; Independence; Zheng He Treasure Fleet; Captain Kidd's Adventure Galley; Oseberg/Kraken; Roman Quinquereme/Archimedes' Claw, Wa'a Kualua, Ghost Ship Jenny; Banshee II
LyleK1 Posted May 18, 2023 #43 Posted May 18, 2023 Well done, Bob! Looking very smart! Glen McGuire, mtaylor and Keith Black 3 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD
Knocklouder Posted May 21, 2023 Author #44 Posted May 21, 2023 Well my friends, it is that time. I am going to mark this one finished. Made and attached the rudders, and finally Captain Marvin Got his pillows lol. It's all done, and we decided to add more wind to the sails. So I saturated the sail with GAC 400, got the hair dryer, low heat, high wind, and using the hair dryer I blew it for about 10 minutes . The sail turn out fine. More wind lol 😆 So here are a few more final pictures. Plus, I would like to thank M S W for helping along the way. And a big thank you to the four other Sea of Galilee Boat logs that I leaned on to finish. Bye for now see you soon BOB M. I gave this boat to the first Mate, she said she loves it. So I got a even bigger grin on my face lol bye for now 😅 ccoyle, KurtH, VTHokiEE and 10 others 10 2 1 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
Keith Black Posted May 21, 2023 #45 Posted May 21, 2023 Congratulations, Bob. It's always grand when our mates enjoy the fruits of our labor. Glen McGuire, VitusBering, Knocklouder and 1 other 3 1 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
VitusBering Posted May 21, 2023 #46 Posted May 21, 2023 Truly wondrous. Very well done. Keith Black, Glen McGuire, Knocklouder and 1 other 3 1 Quote Current build: Cutty Sark by VitusBering - Revell - 1:96 - Redux -- Darryl
ccoyle Posted May 21, 2023 #47 Posted May 21, 2023 Nice work, Bob, and congratulations! Glen McGuire, Keith Black, VitusBering and 2 others 5 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
Knocklouder Posted May 21, 2023 Author #48 Posted May 21, 2023 Thanks Chris, and for fixing up the title, I will try to get it right on my next one lol. Keith Black, Glen McGuire, VitusBering and 2 others 5 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
robert952 Posted May 21, 2023 #49 Posted May 21, 2023 Nice looking model. Good job. Glen McGuire, mtaylor, VitusBering and 2 others 4 1 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?)
LyleK1 Posted May 21, 2023 #50 Posted May 21, 2023 Finished already!!? She looks beautiful! Well done, Bob! mtaylor, Keith Black, Glen McGuire and 1 other 3 1 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD
East Ender Posted May 21, 2023 #51 Posted May 21, 2023 Outstanding job! Looks great! Knocklouder, mtaylor and Keith Black 2 1 Quote Tim Lent
goatfarmer11 Posted May 21, 2023 #52 Posted May 21, 2023 That turned out beautiful, thanks for sharing your build. Knocklouder, Keith Black and mtaylor 2 1 Quote =Denis- _____________________________________________________________________________________________________________________________________ Under Construction Miranda
Snug Harbor Johnny Posted May 21, 2023 #53 Posted May 21, 2023 Thank you for sharing. Your work is both sensational and inspirational ! Knocklouder, mtaylor, Glen McGuire and 1 other 3 1 Quote Completed builds: Khufu Solar Barge - 1:72 Woody Joe Current project(s): Gorch Fock restoration 1:100, Billing Wasa (bust) - 1:100 Billings, Great Harry (bust) 1:88 ex. Sergal 1:65
Paul Le Wol Posted May 21, 2023 #54 Posted May 21, 2023 Bob, congratulations to you and the 1st Mate on completing this beautiful boat! Knocklouder, Keith Black, Glen McGuire and 1 other 3 1 Quote Regards……..Paul Completed Builds Glad Tidings Model Shipways. - Nordland Boat. Billings Boats . - HM Cutter Cheerful-1806 Syren Model Ship Company.
mtaylor Posted May 21, 2023 #55 Posted May 21, 2023 Beautiful model, Bob. Looks great. Keith Black, Knocklouder, Glen McGuire and 1 other 3 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Balclutha75 Posted May 22, 2023 #56 Posted May 22, 2023 Truly beautiful model, and such an exciting race to the finish line! Thanks for sharing. Enjoy your road trip. Keith Black, Glen McGuire and mtaylor 3 Quote
Estoy_Listo Posted June 10, 2023 #57 Posted June 10, 2023 Smashing build, Bob. And thanks for the log. It's helped me a lot. Knocklouder and Glen McGuire 1 1 Quote Experience is what you get when you don't get what you want Current build: Model Expo Glad Tidings, Pinky Schooner First builds: Midwest Muscongus Bay Lobster Smack Midwest Chesapeake Bay Flattie
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.