marsalv
-
Posts
531 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by marsalv
-
-
- NMBROOK, aviaamator, Archi and 16 others
- 19
-
- NMBROOK, PeteB, Old Collingwood and 21 others
- 24
-
-
-
-
First of all I would like thank you all for very very nice comments - I am very happy for that. And now the answer for Greg´s (dvm27) qustion: the wooden woolding hoops are made from very thin pear plank - dimesions are 0,4 x 1,0 mm. This plankmust be thoroughly moistened in water and then it can be carefully wrapped around the corresponding round rod. Both end of the planks are fixed and after drying (preferably overnight) you get a wooden spiral from which the individual rings are then cutted - see picture.
And now a few new photos - lower mast tops. It remains to add rail, deadeyes and blocks - it will be made after coloring.
- NMBROOK, Old Collingwood, dvm27 and 27 others
- 30
-
- Karleop, Beef Wellington, albert and 23 others
- 26
-
Thank you guys, the answer to the jdbondy question: See the picture in my post dated 4 August. There is an aid tool which I use to make networks. After thread stretching is important thoroughly to overlap the netting with diluted PVA glue. After drying is possible to cut the netting into the required shape.
Work is now slower, thanks to my own stupidity, I often have to make some parts agani and again. Some pictures from lower mast production for today.
-
- tadheus, aviaamator, Erik W and 21 others
- 24
-
- Dubz, Tigersteve, archjofo and 9 others
- 12
-
Hi Ondras,
nice to see you here with the new build.
-
To Ilhan: Parts of hammock cranec are made from different messing tubes and profiles. Individual parts are then soldered together with silver soldering paste.
Installation of hammock nettings and swivel guns - the last part of the hull at this moment. Now I am going making the masts, tops, yards etc.
-
- tadheus, Bluto 1790, mtaylor and 28 others
- 31
-
-
-
-
- alde, John Allen, Dilbert55 and 27 others
- 30
-
I forgot to answer the Tigersteve´s question - brass blackening is made with blackening agent for Tiffany technology (http://www.vensy.cz/vensy/eshop/12-1-Tiffany-technika-cinovani/31-2-Chemie-pro-cinovani/5/345-Patina-cerna-tiffany-technika), warm solution 2:50 (water).
The next one is binnacle.
- Bluto 1790, allanyed, Erik W and 23 others
- 26
-
-
-
-
- Captain Poison, tlevine, oneslim and 14 others
- 17
-
- toms10, John Cheevers, NMBROOK and 18 others
- 21
-
Pandora by marsalv - FINISHED - 1:52
in - Build logs for subjects built 1751 - 1800
Posted
Thank you Meddo.
As next part was blocks for the bowsprit.