-
Posts
5,587 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by BANYAN
-
Nice to see that update John, she is coning along great cheers Pat
- 745 replies
-
- francis pritt
- mission ship
-
(and 1 more)
Tagged with:
-
Hi David, I have not used that plane so cannot provide a recommendation either way, but I have two veritas planes I just love. I also use IBEX finger planes. IBEX also make luthier's (or finger) planes, some with a curved, some with a flat sole in various sizes. Good quality but a little on the expensive side (they have come down in price in the past year or two down here anyway). In Australia they are available through CarbaTec (http://www.carbatec.com.au/ibex-violin-makers-planes_c6560) - no associations etc. I am sure there are many other sources though; here is just one http://www.lmii.com/products/tools-services/planes/ibex-finger-plane cheers Pat.
-
Thanks for the link to the article Bob, an interesting read. cheers Pat
-
Hi Mark, won't bending it change the shape of the notch? Perhaps that is recoverable though as if it is in the centre there should not be much bend there? cheers Pat
-
Thanks Druxey - I need my wake up pills I completely missed that - thanks for the pointer Remco cheers Pat
- 1,192 replies
-
- sloop
- kingfisher
-
(and 1 more)
Tagged with:
-
Hi again Remco, Would you be able to identify the soldering block and pin jig you use (see a copy of your photo below) - Is this home made (drilled) from a solder block or is it a commercially available product please? It looks commercial, but with your skills I would not put this past your abilities It looks a very useful jig for such jobs. Many thanks Pat
- 1,192 replies
-
- sloop
- kingfisher
-
(and 1 more)
Tagged with:
-
soldering torch vs iron
BANYAN replied to rtropp's topic in Metal Work, Soldering and Metal Fittings
I apologise upfront if this is slightly deviating from topic as it was titled torch vs iron - sorry if I am hijacking your thread Richard. If thought necessary, I will move this discussion to a new thread but I thought it sort of fits here? Recently I have been investigating resistance soldering and would appreciate any feedback/experience of users. There are some uTube and other threads out there on the web that show that resistance soldering provides sufficient heat for hard (silver) soldering (for smaller jobs). One major advantage being that you can solder several small bits close to each other without damaging the other joint even without using different melting point temps. As I will only be using this for small work such as eyebolts, chainplates and some photoetch joints, I think the power (thermal output) is sufficient with a 250Watt set. My main concern though is when doing longer seams in photoetch etc in that as the heat is very localised , whether you can draw the solder far enough through wicking along the joint even by dragging the probe (electrode) along the joint. Anyone have any experience with this? While this aspect might be problematic for this type of soldering activity, it is very beneficial (near perfect) for spot soldering of eyes and closely located parts on a small job such as a spider band etc. Of particular benefit is that by testing and selecting the appropriate temp it is even possible to solder white (Britannia) metal - try that with a torch cheers Pat -
Hi Daniel, I can't offer any advice WRT cabin positioning etc, but agree with Druxey that nothing should impede, or potentially impede the tiller arm and associated tackle. This begs the question of how on earth they worked those guns especially when not run out. The men would have been ducking and weaving with a constant eye on the tiller arm which would have distracted from their primary duties Is the photo deceptive (foreshortening) or is the tiller arm well above the level of the gun and the heads of the gunners? Would this also have governed the height of any canvas partition? Sorry to complicate your question cheers Pat
-
soldering torch vs iron
BANYAN replied to rtropp's topic in Metal Work, Soldering and Metal Fittings
Ditto. For hooks, eyebolts and small parts I use a micro torch with the tip. For anything larger, in ship modelling tasks, I use the flame and not the tip of the micro torch. I find the placement of the flux, solder pellet and the tip/flame point very important in controlling the direction of flow. cheers Pat -
Looks great Greg - end in sight now! cheers Pat
- 319 replies
-
Very nice work Remco; that is incredibly fine joinery and metal work. Ditto on the assembly/soldering board - can you provide name/type and purchasing details please? cheers Pat
- 1,192 replies
-
- sloop
- kingfisher
-
(and 1 more)
Tagged with:
-
Thanks for the feedback folks; I will email John to see if he can help. In the meantime I have found a couple of potential veneer printing and laser cutting businesses here in Australia which are set up for the artist community, not specifically modellers but they may prove helpful. I will post the results of my search when I have investigated a little further. cheers Pat
-
I hope the Moderators will forgive me posting this here but it is the place where it may get most views and I thought not quite a Traders post. I am investigating having some 1mm wood veneer printed with the pattern of the deck planking, margin planks etc for a build the club is doing. The scale requires 2.2mm planks which would not only be tedious to do but very time consuming and very prone to errors. Does anyone have information or contacts that may be able to print the deck plank pattern onto wood veneer if we provide the artwork? Is this even possible? regards Pat Edit: I have just found this (a possibility?) http://www.cardsofwood.com/store/inkjet_veneer_builder.asp?estore_itemid=7352
-
For consideration - as pointed out many of the prints/paintings are for ships entering harbour. As a ship came to anchor it is the practice to 'out booms and boats' in a seaman like manner which meant that if it was not synchronised with the anchor being let go, the skipper and his "jimmy" would leave a forceful foot imprint somewhere . The salute is usually made on entering harbour as the entering ship passes the Governor's or senior Officer's residence/ship and before anchoring. Therefore, it is quite likely that if these ships are preparing to come to anchor the boat and boom tackles may have been rigged ready for use? cheers Pat
-
Incredible and very inspirational scale joinery Remco. cheers Pat
- 1,192 replies
-
- sloop
- kingfisher
-
(and 1 more)
Tagged with:
-
Australian Heritage (Victoria/Tas) question.
BANYAN replied to Rick01's topic in Nautical/Naval History
Thanks Bob - that answers the copyright then Karl was the member I was referring to. cheers Pat -
Australian Heritage (Victoria/Tas) question.
BANYAN replied to Rick01's topic in Nautical/Naval History
Hi Terry, a very interesting subject you have raised and perhaps if there is interest it should be raised in a new thread rather than hijacking this one? A quick search of the NMM showed several watercolours and illustrations of the Rattlesnake but no plans (see http://collections.rmg.co.uk/collections.html#!csearch;searchTerm=HMS_Rattlesnake_1822;start=0 ). I would suggest a search of the NMM plans under each ship in the class (as well as Atholl Class) if you have not already tried that option. As these ships were not built in or for Australia (or the colonies back then) there will be little or no information in the usual sources we used for the Victoria (Colonial Office in London, and the Parliamentary Records of Victoria). Of interest: according to Robert Gardiner in his book "The Sailing Frigate: A History in Ship Models " [page 119] he states that these vessels (6th Rates) were subject to much variation due to experimentation in design with the ships of the Atholl Class being constructed of different timbers for comparative purposes. Good luck on this one as it would be an interesting build. cheers Pat p.s. Have you seen this: http://collections.rmg.co.uk/collections/objects/66667.html (Rainbow) and http://collections.rmg.co.uk/collections/objects/66666.html (Samarang)? -
Australian Heritage (Victoria/Tas) question.
BANYAN replied to Rick01's topic in Nautical/Naval History
Rick, the Enterprise replica is Melbourne based and could be used for reference - I have a few photos somewhere. More to the point, the replica was constructed to plans drawn up by one of our club's members. If there is sufficient interest, we could ask whom has the copyright to those plans and maybe produce a model. The club is currently researching and building a model of another ship of significant historical interest to Victoria and Tasmania (having transported the roe from Melbourne to Tasmania to start the very successful Salmon industry they now have - the HMCSS Victoria. Perhaps the Enterprise may be of interest to our club for a future build if no one takes it up? Thanks for raising this. cheers Pat
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.